Page 1 of 2

Partition ist voll und nicht ausreichend

Posted: Sat Apr 26, 2025 11:40 am
by Sagit14
Hallo,

habe MX-Linux 23.2 installiert und auf 23.6 upgedated. Die Partition hat ein Größe von 41 GB. Im System ist die VirtualBox installiert. Normaler weise sollte die Größe ausreichend sein, jedoch habe ich nur noch wenige MB frei. apt-get autoremove habe ich ausgeführt, aber ohne Erfolg.Was macht die Partition so voll und wie kann ich etwas Platz schaffen ? Werden bei Updates die alten Dateien nicht entfernt oder wie kann ich diese, die nicht mehr benötigt werden, entfernen ?

Re: Partition ist voll und nicht ausreichend

Posted: Sat Apr 26, 2025 11:47 am
by CharlesV
In den deutschen Bereich verschoben.

@Sagit14 Ihr Beitrag ist hier.

Re: Partition ist voll und nicht ausreichend

Posted: Sat Apr 26, 2025 11:48 am
by CharlesV
Sie können MX Cleanup verwenden, um Speicherplatz freizugeben. Kernel-Updates können einen erheblichen Speicherplatzverbrauch verursachen - Sie sollten jedoch mindestens zwei haben, damit Sie bei Bedarf ein Rollback durchführen können.

Re: Partition ist voll und nicht ausreichend

Posted: Sat Apr 26, 2025 11:50 am
by CharlesV
Bitte posten Sie Ihre QSI. ( MX-Menü, Quick System Info, Für Forum kopieren, hier einfügen )

Re: Partition ist voll und nicht ausreichend

Posted: Sun Apr 27, 2025 7:30 am
by schwarzheit
Hast du eine eigene /home Partition?
Wo sind die VMs abgelegt?

Wenn das alles in der einen / Partition liegt reichen 41Gb bei weitem nicht aus.

Re: Partition ist voll und nicht ausreichend

Posted: Mon Apr 28, 2025 7:39 am
by Sagit14
Hallo CharlesV,

wie poste ich meine QSI an MX-Menü, Quick System Info, Für Forum kopieren, hier einfügen.

Re: Partition ist voll und nicht ausreichend

Posted: Mon Apr 28, 2025 7:47 am
by Sagit14
Hallo Schwarzheit,
cs
keine eigene home-Partition. Der Ordner VirtualBox VMs liegt dort, die Datei Windows10.vdi hat ca. 25 GB. Die VirtualBox liegt auf einer separaten Partition.

Re: Partition ist voll und nicht ausreichend

Posted: Mon Apr 28, 2025 7:56 am
by j2mcgreg
Sagit14 wrote: Mon Apr 28, 2025 7:39 am Hallo CharlesV,

wie poste ich meine QSI an MX-Menü, Quick System Info, Für Forum kopieren, hier einfügen.
1) Starten Sie das Dienstprogramm „Quick System Info“ (QSI).
2) Klicken Sie unten im generierten QSI-Bericht auf „Für Forum kopieren“.
3) Klicken Sie in Ihrem Thread auf „Einfügen“.

Re: Partition ist voll und nicht ausreichend

Posted: Mon Apr 28, 2025 8:09 am
by Sagit14
Hallo j2mcgreg

Code: Select all

Snapshot created on: 20250425_1224
System:
  Kernel: 6.1.0-33-amd64 [6.1.133-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-33-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.6_x64 Libretto January 21  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: Acer product: Aspire E1-772G v: V1.03 serial: <superuser required>
  Mobo: Acer model: EA70_HW v: Type2 - Board Version serial: <superuser required> UEFI: Insyde
    v: 1.03 date: 01/28/2014
Battery:
  ID-1: BAT0 charge: 27.2 Wh (100.0%) condition: 27.2/48.4 Wh (56.1%) volts: 12.4 min: 10.8
    model: AS10D81 type: Li-ion serial: N/A status: full
CPU:
  Info: model: Intel Core i5-4200M bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
    note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x3C (60) stepping: 3
    microcode: 0x28
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 1396 high: 1399 min/max: 800/3100 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 1399 2: 1397 3: 1394 4: 1397 bogomips: 19953
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: conditional; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 4th Gen Core Processor Integrated Graphics vendor: Acer Incorporated ALI
    driver: i915 v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1
    empty: HDMI-A-1,VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0416 class-ID: 0300
  Device-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M]
    vendor: Acer Incorporated ALI driver: N/A alternate: nouveau non-free: series: 390.xx+
    status: legacy-active (EOL~late 2022) arch: Fermi code: GF1xx process: 40/28nm built: 2010-16
    pcie: gen: 1 speed: 2.5 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 01:00.0 chip-ID: 10de:1140
    class-ID: 0302
  Device-3: Sunplus Innovation HD WebCam type: USB driver: uvcvideo bus-ID: 2-5:2
    chip-ID: 1bcf:2c55 class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 424x239mm (16.69x9.41") s-diag: 487mm (19.16")
  Monitor-1: eDP-1 model: AU Optronics 0x119e built: 2011 res: 1600x900 hz: 60 dpi: 106
    gamma: 1.2 size: 382x214mm (15.04x8.43") diag: 438mm (17.2") ratio: 16:9 modes: 1600x900
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 4600 (HSW GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: Acer Incorporated ALI
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c class-ID: 0403
  Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Acer Incorporated ALI 8
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20 class-ID: 0403
  API: ALSA v: k6.1.0-33-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter vendor: Lite-On
    driver: ath9k v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 0d:00.0
    chip-ID: 168c:0036 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Device-2: Broadcom NetLink BCM57780 Gigabit Ethernet PCIe vendor: Acer Incorporated ALI
    driver: tg3 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 0e:00.0
    chip-ID: 14e4:1692 class-ID: 0200
  IF: eth0 state: down mac: <filter>
Bluetooth:
  Device-1: Lite-On Atheros AR3012 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 2-10:5
    chip-ID: 04ca:300b class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 2.1 lmp-v: 4.1 sub-v: 1
    hci-v: 4.1 rev: 3101
  Info: acl-mtu: 1022:8 sco-mtu: 183:5 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 931.51 GiB used: 410.98 GiB (44.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10JPVX-22JC3T0 size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
    rev: 1A01 scheme: GPT
Partition:
  ID-1: / raw-size: 42.12 GiB size: 41.16 GiB (97.73%) used: 38.24 GiB (92.9%) fs: ext4
    dev: /dev/sda5 maj-min: 8:5
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 4.4 MiB (4.6%) fs: vfat
    dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 54.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2322 libs: 1221 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian/ bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
  Processes: 230 Uptime: 1h 42m wakeups: 2 Memory: 7.64 GiB used: 2.02 GiB (26.4%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

Re: Partition ist voll und nicht ausreichend  [Solved]

Posted: Mon Apr 28, 2025 10:10 am
by j2mcgreg
Ich stimme @schwarzheit zu, dass 41 GB nicht ausreichen. So viel Speicherplatz würde ich allein für /root reservieren.

Außerdem ist deine WD-Festplatte zwölf Jahre alt, also deutlich über dem üblichen Alter von sieben bis acht Jahren. Du solltest sie bald und vor dem Eintreten eines Notfalls austauschen.