Page 1 of 2
(Feedback) on icons involving Nemo
Posted: Sat Sep 14, 2024 2:44 pm
by mxethernut
I have installed Nemo as a 2nd file manager next to Dolphin on KDE.
When I use its file-roller extension on right-click, the wrong icon is used.
It's not the brown zipped-folder on but the X11 one.
It's indifferent whether I use the default icon set or
MX Breeze Dark or have Klassy 5.27 enabled.
Please link a useful icon instead of the one below.
Re: (Feedback) on icons involving Nemo
Posted: Sat Sep 14, 2024 2:46 pm
by Eadwine Rose
With all help requests, as per forum rules (which, please read), please share your full Quick System Info, do not edit. If need be, you can do this with the LiveUSB, thanks.
Re: (Feedback) on icons involving Nemo
Posted: Sat Sep 14, 2024 3:14 pm
by mxethernut
I will but I assume this is default for everyone regardless of system.
Inconsistent icons are a known issue on Plasma 5.
Re: (Feedback) on icons involving Nemo
Posted: Sat Sep 14, 2024 3:39 pm
by siamhie
mxethernut wrote: Sat Sep 14, 2024 3:14 pm
I will but I assume this is default for everyone regardless of system.
Inconsistent icons are a known issue on Plasma 5.
In the time you took to respond, you could have just posted the required information.
Maybe you have an icon set that doesn't have the MX icons? (The MX Conky icon shows properly for me)
*EDIT: I've responded to the wrong post.
Re: (Feedback) on icons involving Nemo
Posted: Sat Sep 21, 2024 5:26 pm
by mxethernut
Code: Select all
System:
Kernel: 6.10.10-2-liquorix-amd64 [6.10-13~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
intel_pstate=disable BOOT_IMAGE=/vmlinuz-6.10.10-2-liquorix-amd64 root=UUID=<filter> ro quiet
splash resume=UUID=<filter> resume_offset=146782208 init=/lib/systemd/systemd
Desktop: KDE Plasma v: 5.27.5 tk: Qt v: 5.15.8 info: latte-dock wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-23.4_KDE_x64 Libretto May 19 2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: PRIME H570M-PLUS v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 2001 date: 02/01/2023
CPU:
Info: model: 11th Gen Intel Core i7-11700K bits: 64 type: MT MCP arch: Rocket Lake gen: core 11
level: v4 note: check built: 2021+ process: Intel 14nm family: 6 model-id: 0xA7 (167) stepping: 1
microcode: 0x62
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 640 KiB
desc: d-8x48 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 3680 high: 4683 min/max: 800/4900:5000 scaling: driver: intel_pstate
governor: performance cores: 1: 4679 2: 4636 3: 4673 4: 4601 5: 4667 6: 4683 7: 4602 8: 4681
9: 800 10: 4600 11: 800 12: 4600 13: 800 14: 4658 15: 800 16: 4600 bogomips: 115200
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling mitigation: Microcode
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: Enhanced IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional; RSB filling;
PBRSB-eIBRS: SW sequence; BHI: SW loop, KVM: SW loop
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel RocketLake-S GT1 [UHD Graphics 750] vendor: ASUSTeK driver: i915 v: kernel
alternate: xe arch: Gen-12.1 process: Intel 10nm built: 2020-21 ports: active: none empty: DP-1,
HDMI-A-1, HDMI-A-2, HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:4c8a class-ID: 0300
Device-2: AMD Navi 31 [Radeon RX 7900 XT/7900 XTX] vendor: Sapphire driver: amdgpu v: kernel
arch: RDNA-3 code: Navi-3x process: TSMC n5 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: DP-2, DP-3, HDMI-A-4, HDMI-A-5 empty: Writeback-1 bus-ID: 03:00.0
chip-ID: 1002:744c class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: amdgpu,modesetting unloaded: fbdev,radeon,vesa dri: radeonsi gpu: amdgpu display-ID: :0
screens: 1
Screen-1: 0 s-res: 9600x2160 s-dpi: 96 s-size: 2540x571mm (100.00x22.48")
s-diag: 2603mm (102.5")
Monitor-1: DP-2 mapped: DisplayPort-1 pos: 1-4 model: BenQ GW2760HS serial: <filter>
built: 2015 res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2 size: 598x336mm (23.54x13.23")
diag: 686mm (27") ratio: 16:9 modes: max: 1920x1080 min: 720x400
Monitor-2: DP-3 mapped: DisplayPort-2 pos: primary,1-3 model: BenQ EL2870U serial: <filter>
built: 2020 res: 3840x2160 hz: 60 dpi: 157 gamma: 1.2 size: 621x341mm (24.45x13.43")
diag: 708mm (27.9") ratio: 16:9 modes: max: 3840x2160 min: 720x400
Monitor-3: HDMI-A-4 mapped: HDMI-A-3 pos: 1-2 model: BenQ GW2760HS serial: <filter> built: 2014
res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2 size: 598x336mm (23.54x13.23") diag: 686mm (27")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
Monitor-4: HDMI-A-5 mapped: HDMI-A-4 pos: 2-1 model: Samsung built: 2012 res: 1920x1080 hz: 60
dpi: 55 gamma: 1.2 size: 886x498mm (34.88x19.61") diag: 1168mm (46") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: AMD Radeon Graphics (gfx1100 LLVM 15.0.6
DRM 3.57 6.10.10-2-liquorix-amd64) direct-render: Yes
Audio:
Device-1: Intel Tiger Lake-H HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
alternate: snd_soc_avs,snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:43c8 class-ID: 0403
Device-2: AMD driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 03:00.1 chip-ID: 1002:ab30 class-ID: 0403
Device-3: Creative Labs CA0132 Sound Core3D [Sound Blaster Recon3D / Z-Series BlasterX AE-5
Plus] driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 05:00.0
chip-ID: 1102:0012 class-ID: 0403
API: ALSA v: k6.10.10-2-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15fa class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 3.46 TiB used: 2.07 TiB (59.9%)
SMART Message: Unable to run smartctl. Root privileges required.
Partition:
ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 891.34 GiB (48.7%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: luks-<filter>
ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 656.6 MiB (67.5%) fs: ext4
dev: /dev/nvme1n1p2 maj-min: 259:3
ID-3: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/nvme1n1p1 maj-min: 259:2
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 136.64 GiB used: 7.22 GiB (5.3%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 51.0 C mobo: 36.0 C gpu: amdgpu temp: 63.0 C mem: 72.0 C
Fan Speeds (RPM): fan-1: 938 fan-2: 977 fan-3: 0 fan-4: 0 fan-5: 0 fan-6: 1044 fan-7: 0
gpu: amdgpu fan: 0
Repos:
Packages: 3072 pm: dpkg pkgs: 3045 libs: 1532 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 27
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
3: deb http://deb.debian.org/debian bookworm-backports main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bookworm main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb https://mirror.23m.com/mx-packages/mx/repo/ bookworm main non-free
2: deb https://mirror.23m.com/mx-packages/mx/repo/ bookworm ahs
Active apt repos in: /etc/apt/sources.list.d/onlyoffice.list
1: deb https://download.onlyoffice.com/repo/debian squeeze main
Info:
Processes: 730 Uptime: 2d 2h 3m wakeups: 0 Memory: 125.57 GiB used: 25.1 GiB (20.0%)
Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers:
gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: (Feedback) on icons involving Nemo
Posted: Sat Sep 21, 2024 5:29 pm
by mxethernut
What my icon config is:
DE: Plasma 5.27.5 [KF5 ] [Qt ] (x11)
Theme: Goldy-Dark-GTK [GTK2/3]
Icons: breeze-dark [GTK2/3]
Cursor: Breeze_Snow [GTK2/3]
Re: (Feedback) on icons involving Nemo
Posted: Wed Sep 25, 2024 2:40 pm
by mxethernut
Is there a section where I can put my latest 2 "feedback" suggestions?
(This and
viewtopic.php?t=81977)
It only concerns 1 icon choice overall.
Re: (Feedback) on icons involving Nemo
Posted: Wed Sep 25, 2024 4:30 pm
by dreamer
Most likely the file-roller extension gets its icon from the icon theme that is currently used for gtk applications.
The standard icon theme for gtk is Adwaita icon theme. I'm pretty sure the correct icon is in Adwaita since file-roller is a Gnome application. Try changing your gtk icon theme to Adwaita. Then log out and in again so the setting takes effect.
I haven't seen this problem when using Nemo in Cinnamon or Xfce.
Re: (Feedback) on icons involving Nemo
Posted: Wed Sep 25, 2024 5:12 pm
by mxethernut
dreamer wrote: Wed Sep 25, 2024 4:30 pm
Try changing your gtk icon theme to Adwaita. Then log out and in again so the setting takes effect.
I haven't seen this problem when using Nemo in Cinnamon or Xfce.
Afaik, you can not set a separate (gtk) icon set on Plasma. There is only one icon set to choose.
You can set icons manually but they are not respected in all appearances, like say you change the Firefox one, it will still use the old one in the upper left corner of the Ff window.
Ok maybe an idea is to create a desktop entry. Could also be from start menu...
Because I see none for file-roller.
Maybe thats the way to go :)
Re: (Feedback) on icons involving Nemo
Posted: Thu Sep 26, 2024 3:02 pm
by dreamer
mxethernut wrote: Wed Sep 25, 2024 5:12 pm
You can set icons manually but they are not respected in all appearances, like say you change the Firefox one, it will still use the old one in the upper left corner of the Ff window.
The Firefox icons you see in title bars are in the /opt/firefox/ folder I believe.
The easiest way to solve your problem with File Roller is probably to use another archiver. KDE comes with Ark(?) so should have an icon the the Breeze icon theme.
If you want to use File Roller with correct icon and Breeze icon theme you must add Adwaita to the index.theme file in your Breeze icon theme. This link shows the relevant "Inherits" line in the index.theme file:
https://ubuntuforums.org/showthread.php?t=2154234