MX Linux Forum

Support for MX and antiX Linux distros
http://www.forum.mxlinux.org/

MX-21 fluxbox beta 1 feedback thread.

http://www.forum.mxlinux.org/viewtopic.php?t=66050

Page 1 of 22

MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 3:17 pm
by dolphin_oracle
This thread is for items specific to the mx-21 fluxbox beta 1 isos.

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 3:58 pm
by chrispop99
Every boot live and installed, on a 64-bit desktop machine, generates an xmessage;

Code: Select all

tint2:Battery low!
Chris

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 4:19 pm
by Jerry3904
Just getting back after a long work day, haven't had a chance to even download yet.

The tint2 we are using as default includes an active battery item for the first time. It is set to show in red when battery level drops to 30%, but perhaps there is a problem with the setup. I would think a log out/in would clear it, but if not the easiest solution for now: use Settings manager > Tint2manager to select the same tint2 without the battery: "nobattery-tint2rc"

-------

Now running Live: no message. But that may just be because I am on the same machine I do MXFB development on, and X figures it has already given me the message...

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 5:02 pm
by Melber
The 64 bit download link for md5_checksum_signature points to the 32 bit md5.

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 5:16 pm
by dolphin_oracle
Melber wrote: Fri Aug 20, 2021 5:02 pm The 64 bit download link for md5_checksum_signature points to the 32 bit md5.
fixed thank you.

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 5:19 pm
by oops
chrispop99 wrote: Fri Aug 20, 2021 3:58 pm Every boot live and installed, on a 64-bit desktop machine, generates an xmessage;

Code: Select all

tint2:Battery low!
...
Hello,
Same here too.
PS: I have added the info:loadavg into an executor (can be useful)

Code: Select all

#-------------------------------------
# Executor 2
execp = new
execp_command = cat /proc/loadavg | awk '{print "C:"$1 }'
execp_interval = 10
execp_has_icon = 0
execp_cache_icon = 1
execp_continuous = 0
execp_markup = 1
execp_lclick_command = xterm -geometry 90x12+40+40 -hold -e "echo $USER ; echo 'Charge CPU' ; echo '1min 5min 15min' ; cat /proc/loadavg ; vmstat"
execp_rclick_command = xterm -geometry 150x38+40+40 -hold -e "inxi -v8"
execp_mclick_command = 
execp_uwheel_command = 
execp_dwheel_command = 
execp_font = Noto Sans 8
execp_font_color = #f5caff 100
execp_padding = 0 0
execp_background_id = 0
execp_centered = 0
execp_icon_w = 0
execp_icon_h = 0

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 6:06 pm
by Jerry3904
Ran it Live on my good old AAO 722:

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash 
           Desktop: Fluxbox 1.3.5 info: tint2 dm: LightDM 1.26.0 
           Distro: MX-21_fluxbox_beta1_x64 Wildflower August 20  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: Acer product: AO722 v: V1.08 serial: <filter> Chassis: type: 10 
           v: 1.08 serial: <filter> 
           Mobo: Acer model: JE10-BZ serial: <filter> BIOS: Acer v: 1.08 date: 12/06/2011 
Battery:   ID-1: BAT1 charge: 29.6 Wh condition: 37.0/48.8 Wh (76%) volts: 10.8/11.1 
           model: Sanyo AL10B31 type: Li-ion serial: <filter> status: Discharging 
CPU:       Topology: Dual Core model: AMD C-60 APU with Radeon HD Graphics bits: 64 type: MCP 
           arch: Bobcat family: 14 (20) model-id: 2 stepping: N/A microcode: 5000119 
           L2 cache: 512 KiB 
           flags: lm nx pae sse sse2 sse3 sse4a ssse3 svm bogomips: 3990 
           Speed: 802 MHz min/max: 800/1000 MHz boost: enabled Core speeds (MHz): 1: 801 2: 800 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full AMD retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: AMD Wrestler [Radeon HD 6290] vendor: Acer Incorporated ALI driver: radeon 
           v: kernel bus ID: 00:01.0 chip ID: 1002:9807 
           Display: x11 server: X.Org 1.20.11 driver: ati,radeon 
           unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz 
           OpenGL: renderer: AMD PALM (DRM 2.50.0 / 5.10.0-8-amd64 LLVM 11.0.1) 
           v: 3.3 Mesa 20.3.5 compat-v: 3.1 direct render: Yes 
Audio:     Device-1: AMD Wrestler HDMI Audio vendor: Acer Incorporated ALI driver: snd_hda_intel 
           v: kernel bus ID: 00:01.1 chip ID: 1002:1314 
           Device-2: AMD SBx00 Azalia vendor: Acer Incorporated ALI driver: snd_hda_intel 
           v: kernel bus ID: 00:14.2 chip ID: 1002:4383 
           Sound Server: ALSA v: k5.10.0-8-amd64 
Network:   Device-1: Qualcomm Atheros AR8152 v2.0 Fast Ethernet vendor: Acer Incorporated ALI 
           driver: atl1c v: kernel port: 2000 bus ID: 06:00.0 chip ID: 1969:2062 
           IF: eth0 state: down mac: <filter> 
           Device-2: Qualcomm Atheros AR9485 Wireless Network Adapter vendor: Lite-On 
           driver: ath9k v: kernel port: 2000 bus ID: 07:00.0 chip ID: 168c:0032 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 270.83 GiB used: 1.34 GiB (0.5%) 
           ID-1: /dev/sda vendor: Crucial model: CT275MX300SSD1 size: 256.17 GiB block size: 
           physical: 512 B logical: 512 B speed: 3.0 Gb/s serial: <filter> rev: R040 scheme: MBR 
           ID-2: /dev/sdc type: USB vendor: Kingston model: DataTraveler 3.0 size: 14.65 GiB 
           block size: physical: 512 B logical: 512 B serial: <filter> rev: PMAP scheme: MBR 
Partition: ID-1: / raw size: N/A size: 5.96 GiB used: 21.6 MiB (0.4%) fs: overlay 
           source: ERR-102 
           ID-2: swap-1 size: 21.80 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda4 
Sensors:   System Temperatures: cpu: 59.5 C mobo: N/A gpu: radeon temp: 59 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 171 Uptime: 10m Memory: 7.50 GiB used: 773.9 MiB (10.1%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
Observations:
--took about 90 secs to come to the desktop (not installed)
--no message about low battery (also installed)
--conky had black background (not installed)
--sound was turned off somewhere (not installed)

Here is last part of Xsession_errors running Live:

Code: Select all

Running default tint2rc
Error, .desktop file 'libreoffice-startcenter.desktop' does not exist.
wmalauncher ver. 2020.0124 - (c) 2018-2020, Sébastien Ballet <slacker6896@gmail.com> -

Error, .desktop file 'thunderbird.desktop' does not exist.
wmalauncher ver. 2020.0124 - (c) 2018-2020, Sébastien Ballet <slacker6896@gmail.com> -

/usr/bin/mxfb-menu-generator
Please wait, creating menu file - stored in /home/demo/.fluxbox/submenus/full_menu ...

If you want to insert this All categories sub-menu into your MXFB menu:
rootMenu > Settings > Configure > Menu
and insert, anywhere you want, this code:
 [submenu] (All apps)
  [include] (~/.fluxbox/submenus/full_menu)
  [separator] 
  [exec] (Update Menu) {mxfb-menu-generator} 
 [end]

/home/demo/.fluxbox/startup: 75: /usr/lib/at-spi2-core/at-spi-bus-launcher: not found
mx-welcome version: 21.08mx21
conky: no process found
conky: desktop window (6a7) is root window
conky: window type - normal
conky: drawing to created window (0x3400002)
conky: drawing to double buffer

** (xfce4-clipman:4824): WARNING **: 17:06:44.160: Unable to register GApplication: An object is already exported for the interface org.gtk.Application at /org/xfce/clipman

(xfce4-clipman:4824): GLib-GIO-CRITICAL **: 17:06:44.160: g_application_get_is_remote: assertion 'application->priv->is_registered' failed

(xfce4-clipman:4824): GLib-WARNING **: 17:06:44.160: g_set_application_name() called multiple times
Menu file created and ready to be used
Could not get bg groups from config file.
Keys: Invalid key/modifier on line 41): none F6 :Exec xfce4-appfinder
Keys: Invalid key/modifier on line 183): Mod1 KP_End    :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 BottomLeft}
Keys: Invalid key/modifier on line 184): Mod1 KP_Down   :MacroCmd {ResizeTo 100% 50%} {MoveTo 00 00 Bottom}
Keys: Invalid key/modifier on line 185): Mod1 KP_Next   :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 BottomRight}
Keys: Invalid key/modifier on line 186): Mod1 KP_Left   :MacroCmd {ResizeTo 50% 100%} {MoveTo 00 00 Left}
Keys: Invalid key/modifier on line 187): Mod1 KP_Right  :MacroCmd {ResizeTo 50% 100%} {MoveTo 00 00 Right}
Keys: Invalid key/modifier on line 188): Mod1 KP_Home   :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 TopLeft}
Keys: Invalid key/modifier on line 189): Mod1 KP_Up     :MacroCmd {ResizeTo 100% 50%} {MoveTo 00 00 Up}
Keys: Invalid key/modifier on line 190): Mod1 KP_Prior  :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 TopRight}
Keys: Invalid key/modifier on line 192): Mod1 KP_Begin  :MacroCmd {ResizeTo 70% 70% } {MoveTo 00 00 Center}
Keys: Invalid key/modifier on line 194): Mod1 KP_Insert :ToggleCmd {Maximize} {Restore}
Keys: Invalid key/modifier on line 202): Control 1 :MacroCmd {ResizeTo 50% 100%} {MoveTo 00 00 Left} 
Keys: Invalid key/modifier on line 203): Control 2 :MacroCmd {ResizeTo 50% 100%} {MoveTo 00 00 Right} 
Keys: Invalid key/modifier on line 204): Control 3 :MacroCmd {ResizeTo 100% 50%} {MoveTo 00 00 Up} 
Keys: Invalid key/modifier on line 205): Control 4 :MacroCmd {ResizeTo 100% 50%} {MoveTo 00 00 Bottom} 
Keys: Invalid key/modifier on line 207): Control 5 :MacroCmd {ResizeTo 50% 50%} {MoveTo 00 00 Up} 
Keys: Invalid key/modifier on line 208): Control 6 :MacroCmd {ResizeTo 50% 50%} {MoveTo 00 00 TopRight} 
Keys: Invalid key/modifier on line 209): Control 7 :MacroCmd {ResizeTo 50% 50%} {MoveTo 00 00 BottomLeft} 
Keys: Invalid key/modifier on line 210): Control 8 :MacroCmd {ResizeTo 50% 50%} {MoveTo 00 00 BottomRight} 
Keys: Invalid key/modifier on line 212): Control 9 :MacroCmd {ResizeTo 33% 100%} {MoveTo 00 00 Left}
Keys: Invalid key/modifier on line 214): Control 0 :ToggleCmd {Maximize} {Restore}
Keys: Invalid key/modifier on line 220): Mod1 Left        :MacroCmd {ResizeTo 50% 100%} {MoveTo 00 00 Left}
Keys: Invalid key/modifier on line 221): Mod1 Right       :MacroCmd {ResizeTo 50% 100%} {MoveTo 00 00 Right}
Keys: Invalid key/modifier on line 222): Mod1 Up          :MacroCmd {ResizeTo 100% 50%} {MoveTo 00 00 Up}
Keys: Invalid key/modifier on line 223): Mod1 Down        :MacroCmd {ResizeTo 100% 50%} {MoveTo 00 00 Bottom}
Keys: Invalid key/modifier on line 225): Mod1 Mod4 Left  :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 TopLeft}
Keys: Invalid key/modifier on line 226): Mod1 Mod4 Up    :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 TopRight}
Keys: Invalid key/modifier on line 227): Mod1 Mod4 Down  :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 BottomLeft}
Keys: Invalid key/modifier on line 228): Mod1 Mod4 Right :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 BottomRight}
Keys: Invalid key/modifier on line 244): Mod1 KP_1 :MacroCmd {ResizeTo  50%  50%} {MoveTo 00 00 BottomLeft}
Keys: Invalid key/modifier on line 245): Mod1 KP_2 :MacroCmd {ResizeTo 100%  50%} {MoveTo 00 00 Bottom}
Keys: Invalid key/modifier on line 246): Mod1 KP_3 :MacroCmd {ResizeTo  50%  50%} {MoveTo 00 00 BottomRight}
Keys: Invalid key/modifier on line 247): Mod1 KP_4 :MacroCmd {ResizeTo  50% 100%} {MoveTo 00 00 Left}
Keys: Invalid key/modifier on line 248): Mod1 KP_6 :MacroCmd {ResizeTo  50% 100%} {MoveTo 00 00 Right}
Keys: Invalid key/modifier on line 249): Mod1 KP_7 :MacroCmd {ResizeTo  50%  50%} {MoveTo 00 00 TopLeft}
Keys: Invalid key/modifier on line 250): Mod1 KP_8 :MacroCmd {ResizeTo 100%  50%} {MoveTo 00 00 Up}
Keys: Invalid key/modifier on line 251): Mod1 KP_9 :MacroCmd {ResizeTo  50%  50%} {MoveTo 00 00 TopRight}
Keys: Invalid key/modifier on line 253): Mod1 KP_5 :MacroCmd {ResizeTo 70% 70% } {MoveTo 00 00 Center}
Keys: Invalid key/modifier on line 255): Mod1 KP_0 :ToggleCmd {Maximize} {Restore}
Keys: Invalid key/modifier on line 260): Mod1 KP_End    :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 BottomLeft}
Keys: Invalid key/modifier on line 261): Mod1 KP_Down   :MacroCmd {ResizeTo 100% 50%} {MoveTo 00 00 Bottom}
Keys: Invalid key/modifier on line 262): Mod1 KP_Next   :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 BottomRight}
Keys: Invalid key/modifier on line 263): Mod1 KP_Left   :MacroCmd {ResizeTo 50% 100%} {MoveTo 00 00 Left}
Keys: Invalid key/modifier on line 264): Mod1 KP_Right  :MacroCmd {ResizeTo 50% 100%} {MoveTo 00 00 Right}
Keys: Invalid key/modifier on line 265): Mod1 KP_Home   :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 TopLeft}
Keys: Invalid key/modifier on line 266): Mod1 KP_Up     :MacroCmd {ResizeTo 100% 50%} {MoveTo 00 00 Up}
Keys: Invalid key/modifier on line 267): Mod1 KP_Prior  :MacroCmd {ResizeTo 50% 50% } {MoveTo 00 00 TopRight}
Keys: Invalid key/modifier on line 269): Mod1 KP_Begin  :MacroCmd {ResizeTo 70% 70% } {MoveTo 00 00 Center}
Keys: Invalid key/modifier on line 271): Mod1 KP_Insert :ToggleCmd {Maximize} {Restore}

(nm-applet:4792): Gdk-CRITICAL **: 17:07:18.807: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed

(volumeicon:4823): Gdk-CRITICAL **: 17:07:18.826: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed

(xfce4-clipman:4824): Gdk-CRITICAL **: 17:07:18.871: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
mxfluxbox "MX-Fluxbox 3.0"
Didn't actually try the tiling keystrokes.

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 7:03 pm
by Melber
Ran from Live USB.

- also took about 90 secs to come to the desktop
- message about low battery. Disappears when tint2 set to nobattery-tint2rc
- conky had black background

Congrats, the new & revised tools look a lot more intuitive and accessible for newcomers.

I seem to have a few hardware issues compared to my current install
- I can only select a maximum screen resolution of 1280x1024. (graphic card not supported by new nouveau driver?)
- CPU identified as single core instead of dual core
- Shutdown hangs and doesn't complete

QSI MX21 live USB

Code: Select all

System:    Host: <filter> Kernel: 5.10.0-8-amd64 x86_64 bits: 64 compiler: N/A 
           parameters: quiet splasht nosplash 
           Desktop: Fluxbox 1.3.5 info: tint2 dm: LightDM 1.26.0 
           Distro: MX-21_fluxbox_beta1_x64 Wildflower August 20  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Portable System: Dell product: MXG061 v: N/A serial: <filter> Chassis: type: 8 
           serial: <filter> 
           Mobo: Dell model: 0CF456 serial: <filter> BIOS: Dell v: A07 date: 06/27/2007 
CPU:       Topology: Single Core model: Intel Core2 T7200 bits: 64 type: MCP arch: Core Merom 
           family: 6 model-id: F (15) stepping: 6 microcode: D1 L2 cache: 4096 KiB 
           flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 3990 
           Speed: 1995 MHz min/max: N/A Core speed (MHz): 1: 1995 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA G71M [GeForce Go 7900 GTX] vendor: Dell driver: N/A bus ID: 01:00.0 
           chip ID: 10de:0299 
           Display: x11 server: X.Org 1.20.11 driver: nouveau,vesa unloaded: fbdev,modesetting 
           alternate: nv resolution: 1280x1024~N/A 
           OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 
           direct render: Yes 
Audio:     Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Dell 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8 
           Sound Server: ALSA v: k5.10.0-8-amd64 
Network:   Device-1: Broadcom and subsidiaries NetXtreme BCM5752 Gigabit Ethernet PCI Express 
           vendor: Dell driver: tg3 v: kernel port: ef00 bus ID: 09:00.0 chip ID: 14e4:1600 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel PRO/Wireless 3945ABG [Golan] Network driver: iwl3945 v: in-tree:s 
           port: ef00 bus ID: 0c:00.0 chip ID: 8086:4222 
           IF: wlan0 state: down mac: <filter> 
Drives:    Local Storage: total: 140.44 GiB used: 1.35 GiB (1.0%) 
           ID-1: /dev/sda vendor: Crucial model: CT120BX500SSD1 size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B speed: <unknown> serial: <filter> rev: R013 
           scheme: MBR 
           ID-2: /dev/sdb type: USB vendor: SanDisk model: Cruzer Blade size: 28.65 GiB 
           block size: physical: 512 B logical: 512 B serial: <filter> rev: 1.00 scheme: MBR 
Partition: ID-1: / raw size: N/A size: 2.49 GiB used: 21.1 MiB (0.8%) fs: overlay 
           source: ERR-102 
           ID-2: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda4 
Sensors:   System Temperatures: cpu: 61.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 159 Uptime: 3m Memory: 3.16 GiB used: 706.7 MiB (21.8%) Init: SysVinit 
           v: 2.96 runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36
For comparison, QSI current MX19.4 install

Code: Select all

Snapshot created on: 20210405_1332
System:    Host: <filter> Kernel: 4.19.0-17-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-17-amd64 
           root=UUID=<filter> ro no quiet 
           Desktop: Fluxbox 1.3.7 info: tint2 dm: LightDM 1.26.0 
           Distro: MX-19.4_x64 patito feo February 15  2020 base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Portable System: Dell product: MXG061 v: N/A serial: <filter> Chassis: type: 8 
           serial: <filter> 
           Mobo: Dell model: 0CF456 serial: <filter> BIOS: Dell v: A07 date: 06/27/2007 
Battery:   ID-1: BAT0 charge: 12.4 Wh condition: 12.4/79.9 Wh (16%) volts: 12.3/11.1 
           model: Sanyo DELL C54478 type: Li-ion serial: <filter> status: Full 
CPU:       Topology: Dual Core model: Intel Core2 T7200 bits: 64 type: MCP arch: Core Merom 
           family: 6 model-id: F (15) stepping: 6 microcode: D1 L2 cache: 4096 KiB 
           flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 7979 
           Speed: 1347 MHz min/max: 1000/2000 MHz Core speeds (MHz): 1: 1467 2: 1445 
           Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: NVIDIA G71M [GeForce Go 7900 GTX] vendor: Dell driver: nouveau v: kernel 
           bus ID: 01:00.0 chip ID: 10de:0299 
           Display: x11 server: X.Org 1.20.4 driver: nouveau unloaded: fbdev,modesetting,vesa 
           alternate: nv resolution: 1920x1200~60Hz 
           OpenGL: renderer: NV49 v: 2.1 Mesa 18.3.6 direct render: Yes 
Audio:     Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Dell 
           driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:27d8 
           Sound Server: ALSA v: k4.19.0-17-amd64 
Network:   Device-1: Broadcom Limited NetXtreme BCM5752 Gigabit Ethernet PCI Express 
           vendor: Dell driver: tg3 v: 3.137 port: ef00 bus ID: 09:00.0 chip ID: 14e4:1600 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel PRO/Wireless 3945ABG [Golan] Network driver: iwl3945 v: in-tree:s 
           port: ef00 bus ID: 0c:00.0 chip ID: 8086:4222 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 111.79 GiB used: 17.72 GiB (15.8%) 
           ID-1: /dev/sda vendor: Crucial model: CT120BX500SSD1 size: 111.79 GiB block size: 
           physical: 512 B logical: 512 B speed: <unknown> serial: <filter> rev: R013 
           scheme: MBR 
Partition: ID-1: / raw size: 30.00 GiB size: 29.40 GiB (98.01%) used: 13.31 GiB (45.3%) fs: ext4 
           dev: /dev/sda1 
           ID-2: swap-1 size: 4.00 GiB used: 0 KiB (0.0%) fs: swap swappiness: 15 (default 60) 
           cache pressure: 100 (default) dev: /dev/sda4 
Sensors:   System Temperatures: cpu: 52.5 C mobo: N/A gpu: nouveau temp: 49 C 
           Fan Speeds (RPM): N/A 
Repos:     No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://nl.mxrepo.com/mx/repo/ buster main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 149 Uptime: 12m Memory: 3.18 GiB used: 727.6 MiB (22.4%) Init: SysVinit 
           v: 2.93 runlevel: 5 default: 5 Compilers: gcc: 8.3.0 alt: 8 Shell: quick-system-in 
           running in: quick-system-in inxi: 3.0.36

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 7:11 pm
by Jerry3904
On the display, did you try using the Monitor icon (lxrandr) on Settings Manager?

Re: MX-21 fluxbox beta 1 feedback thread.

Posted: Fri Aug 20, 2021 7:22 pm
by Melber
@Jerry3904
Yes, it only gave me the options auto (which did nothing) and 3 resolutions (1280x1024 and two lower ones)
All times are UTC-04:00
Page 1 of 22

Powered by phpBB® Forum Software © phpBB Limited