Support for MX and antiX Linux distros
http://www.forum.mxlinux.org/
i have try this "use intel drive" than i have get the problem with the black screen.fehlix wrote: Tue Aug 16, 2022 4:51 pmNot sure whether xorg intel driver would have helped to stop the hanger.sisqonrw wrote: Tue Aug 16, 2022 4:39 pm i cant install keepassx nothing happens.
i reboot but after grub the screen is black.
93.566611 hdaudio hadaudioC0D2: Unable to configure, disabling
is given.
Code: Select all
System: Kernel: 5.16.0-5mx-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.16.0-5mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.1_ahs_x64 Wildflower April 9 2022
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: ASUSTeK product: X541UAK v: 1.0 serial: <filter>
Mobo: ASUSTeK model: X541UAK v: 1.0 serial: <filter>
UEFI-[Legacy]: American Megatrends v: X541UAK.303 date: 03/30/2017
Battery: ID-1: BAT0 charge: 31.5 Wh (98.7%) condition: 31.9/34.6 Wh (92.2%) volts: 10.8
min: 10.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A status: Not charging
cycles: 45
CPU: Info: Dual Core model: Intel Core i3-6006U bits: 64 type: MT MCP arch: Skylake
family: 6 model-id: 4E (78) stepping: 3 microcode: EC cache: L2: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 15999
Speed: 2000 MHz min/max: 400/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 3: 2000
4: 2000
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: ASUSTeK driver: N/A
alternate: i915 bus-ID: 00:02.0 chip-ID: 8086:1916 class-ID: 0300
Device-2: IMC Networks USB2.0 VGA UVC WebCam type: USB driver: uvcvideo bus-ID: 1-6:2
chip-ID: 13d3:5a01 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.20.13 compositor: xfwm4 v: 4.16.1 driver: loaded: vesa
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1368x768 s-dpi: 102 s-size: 341x191mm (13.4x7.5")
s-diag: 391mm (15.4")
Monitor-1: default res: 1368x768
OpenGL: renderer: llvmpipe (LLVM 12.0.1 256 bits) v: 4.5 Mesa 21.2.5 compat-v: 3.1
direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel alternate: snd_soc_skl bus-ID: 00:1f.3 chip-ID: 8086:9d70 class-ID: 0403
Sound Server-1: ALSA v: k5.16.0-5mx-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: ASUSTeK driver: r8169
v: kernel port: e000 bus-ID: 02:00.2 chip-ID: 10ec:8136 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Realtek RTL8723BE PCIe Wireless Network Adapter vendor: Lite-On
driver: rtl8723be v: kernel modules: wl port: d000 bus-ID: 03:00.0 chip-ID: 10ec:b723
class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-8:3
chip-ID: 0bda:b721 class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 9f73 hci-v: 4.0 rev: e2f
Info: acl-mtu: 820:8 sco-mtu: 255:16 link-policy: rswitch hold sniff park
link-mode: slave accept service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 931.51 GiB used: 16.23 GiB (1.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM035-1RK172
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 5400 serial: <filter> rev: SDM1 scheme: MBR
Partition: ID-1: / raw-size: 923.5 GiB size: 907.93 GiB (98.31%) used: 16.23 GiB (1.8%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 268 KiB (0.0%) priority: -2
dev: /dev/sda2 maj-min: 8:2
Sensors: System Temperatures: cpu: 48.0 C mobo: N/A
Fan Speeds (RPM): cpu: 2400
Repos: Packages: note: see --pkg apt: 1988 lib: 988 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye main non-free
2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye ahs
Info: Processes: 214 Uptime: 5m wakeups: 2 Memory: 7.66 GiB used: 1009.4 MiB (12.9%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Shell: Bash v: 5.1.4 running-in: quick-system-info-mx
inxi: 3.3.06
Boot Mode: BIOS (legacy, CSM, MBR)
OK, try this again "use intel driver",sisqonrw wrote: Tue Aug 16, 2022 4:53 pm i have try this "use intel drive" than i have get the problem with the black screen.
how can i do thisfehlix wrote: Tue Aug 16, 2022 7:20 pmOK, try this again "use intel driver",sisqonrw wrote: Tue Aug 16, 2022 4:53 pm i have try this "use intel drive" than i have get the problem with the black screen.
and do also add boot parameter to invert intel brightness
i915.invert_brightness=1
using MX Boot Options.
Note sure about the other slowness mentioned, may be related to the drive.
Perhaps run GsmartControl from booted LiveUSB to check drive.
the parameter is nowsisqonrw wrote: Wed Aug 17, 2022 2:39 amhow can i do thisfehlix wrote: Tue Aug 16, 2022 7:20 pmOK, try this again "use intel driver",sisqonrw wrote: Tue Aug 16, 2022 4:53 pm i have try this "use intel drive" than i have get the problem with the black screen.
and do also add boot parameter to invert intel brightness
i915.invert_brightness=1
using MX Boot Options.
Note sure about the other slowness mentioned, may be related to the drive.
Perhaps run GsmartControl from booted LiveUSB to check drive.
GsmartControl
and should i install the UEFI Stick Version? Because i have install the non UEFI Version but it isnt better. i mean, that the UEFI Version was better just we have the display solution problem.
i boot with uefi usb and install the ahs 64 bit version.quiet splash 915.invert_brightness-1
'ru sure or a typo. imo it should be ...=1 otherwise would be ignored:
Code: Select all
i915.invert_brightness=1