installed MX 2.1 MX-21.1_x64 so slow [Solved]

[sisqonrw]

i have installed MX-21.1_x64 on my notebook.
i have made a live usb with balena etcher.
thank i have choose on the booting process under GRUB UEFI USB disk. the same is listed but without UEFI.
MX choose ESP as GRUB.
in the boot option is

ro quiet nosplash video=SVIDEO-1:d i915.invert_brightness=1

booting is low

when i start Firefox it needs ca. 2-3 Minutes.

i have an ASUS X541U notebook with i3, 8GB Ram and 1TB HDD

sadly everything is to low.

[Eadwine Rose]

Please run quick system info. Find it in the menu, put the whole output in a reply. Thanks.

[sisqonrw]

i have installed MX-21.1_x64 on my notebook.
i have made a live usb with balena etcher.
thank i have choose on the booting process under GRUB UEFI USB disk. the same is listed but without UEFI.
MX choose ESP as GRUB.
in the boot option is

ro quiet nosplash video=SVIDEO-1:d i915.invert_brightness=1

booting is low

when i start Firefox it needs ca. 2-3 Minutes.

i have an ASUS X541U notebook with i3, 8GB Ram and 1TB HDD

sadly everything is to low.

Code: Select all

System:
  Kernel: 5.10.0-13-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
  parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-amd64 
  root=UUID=<filter> ro ro quiet nosplash 
  video=SVIDEO-1:d i915.invert_brightness=1 
  Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7 
  dm: LightDM 1.26.0 Distro: MX-21.1_x64 Wildflower April 9  2022 
  base: Debian GNU/Linux 11 (bullseye) 
Machine:
  Type: Laptop System: ASUSTeK product: X541UAK v: 1.0 serial: <filter> 
  Mobo: ASUSTeK model: X541UAK v: 1.0 serial: <filter> 
  UEFI: American Megatrends v: X541UAK.303 date: 03/30/2017 
Battery:
  ID-1: BAT0 charge: 31.4 Wh (99.4%) condition: 31.6/34.6 Wh (91.5%) 
  volts: 10.8 min: 10.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A 
  status: Not charging cycles: 45 
CPU:
  Info: Dual Core model: Intel Core i3-6006U bits: 64 type: MT MCP 
  arch: Skylake family: 6 model-id: 4E (78) stepping: 3 microcode: EC cache: 
  L2: 3 MiB 
  flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx 
  bogomips: 15999 
  Speed: 2000 MHz min/max: 400/2000 MHz Core speeds (MHz): 1: 2000 2: 2000 
  3: 2000 4: 2000 
  Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
  Type: l1tf 
  mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
  Type: meltdown mitigation: PTI 
  Type: spec_store_bypass 
  mitigation: Speculative Store Bypass disabled via prctl and seccomp 
  Type: spectre_v1 
  mitigation: usercopy/swapgs barriers and __user pointer sanitization 
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: 
  conditional, RSB filling 
  Type: srbds mitigation: Microcode 
  Type: tsx_async_abort status: Not affected 
Graphics:
  Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: ASUSTeK driver: N/A 
  alternate: i915 bus-ID: 00:02.0 chip-ID: 8086:1916 class-ID: 0300 
  Device-2: IMC Networks USB2.0 VGA UVC WebCam type: USB driver: uvcvideo 
  bus-ID: 1-6:3 chip-ID: 13d3:5a01 class-ID: 0e02 serial: <filter> 
  Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: 
  loaded: N/A unloaded: fbdev display-ID: :0.0 screens: 1 
  Screen-1: 0 s-res: 800x600 s-dpi: 96 s-size: 212x159mm (8.3x6.3") 
  s-diag: 265mm (10.4") 
  Monitor-1: default res: 800x600 hz: 75 
  OpenGL: renderer: llvmpipe (LLVM 11.0.1 256 bits) v: 4.5 Mesa 20.3.5 
  compat-v: 3.1 direct render: Yes 
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK 
  driver: snd_hda_intel v: kernel alternate: snd_soc_skl bus-ID: 00:1f.3 
  chip-ID: 8086:9d70 class-ID: 0403 
  Sound Server-1: ALSA v: k5.10.0-13-amd64 running: yes 
  Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: ASUSTeK 
  driver: r8169 v: kernel port: e000 bus-ID: 02:00.2 chip-ID: 10ec:8136 
  class-ID: 0200 
  IF: eth0 state: down mac: <filter> 
  Device-2: Realtek RTL8723BE PCIe Wireless Network Adapter vendor: Lite-On 
  driver: rtl8723be v: kernel modules: wl port: d000 bus-ID: 03:00.0 
  chip-ID: 10ec:b723 class-ID: 0280 
  IF: wlan0 state: up mac: <filter> 
Bluetooth:
  Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 
  bus-ID: 1-8:4 chip-ID: 0bda:b721 class-ID: e001 serial: <filter> 
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 
  lmp-v: 4.0 sub-v: 9f73 hci-v: 4.0 rev: e2f 
  Info: acl-mtu: 820:8 sco-mtu: 255:16 link-policy: rswitch hold sniff park 
  link-mode: slave accept 
  service-classes: rendering, capturing, object transfer, audio 
Drives:
  Local Storage: total: 931.51 GiB used: 36.63 GiB (3.9%) 
  SMART Message: Unable to run smartctl. Root privileges required. 
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000LM035-1RK172 
  size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s 
  type: HDD rpm: 5400 serial: <filter> rev: SDM1 scheme: GPT 
Partition:
  ID-1: / raw-size: 923.25 GiB size: 907.69 GiB (98.31%) used: 36.63 GiB (4.0%) 
  fs: ext4 dev: /dev/sda2 maj-min: 8:2 
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) 
  fs: vfat dev: /dev/sda1 maj-min: 8:1 
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
  ID-1: swap-1 type: partition size: 8 GiB used: 780 KiB (0.0%) priority: -2 
  dev: /dev/sda3 maj-min: 8:3 
Sensors:
  System Temperatures: cpu: 44.0 C mobo: N/A 
  Fan Speeds (RPM): cpu: 2100 
Repos:
  Packages: note: see --pkg apt: 1991 lib: 988 flatpak: 0 
  No active apt repos in: /etc/apt/sources.list 
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
  1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian.list 
  1: deb http://deb.debian.org/debian bullseye main contrib non-free
  2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/mx.list 
  1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye main non-free
Info:
  Processes: 208 Uptime: 9m wakeups: 2 Memory: 7.66 GiB used: 976.2 MiB (12.5%) 
  Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: 
  gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 
  running-in: quick-system-info-mx inxi: 3.3.06 
Boot Mode: UEFI

[Eadwine Rose]

Did you check the iso md5sum? Did you check the stick md5sum? If you have a bad iso or a bad "burn" then that can also cause weird issues. Make sure the md5sum (or sha, whatever you use) pans out.

[fehlix]

to add ... and after you have confirmed the integration check (checksum or signature check) went ok, as just proposed.
Please do boot from LiveUSB twice in both boot modes BIOS/legacy and also UEFI:

Within Boot Option list (Press Fn-key may be F12 or F10 at boot-up POST)
and do select
first time:
* LiveUSB (without UEFI)

and also next boot:
* LiveUSB with UEFI.

In both cases and if booted successfully do post "Quick System Info"
from running LiveUSB.

[Huckleberry Finn]

Though you didn't use nomodeset, intel drivers are not loaded :

Graphics:
Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: ASUSTeK driver: N/A
...
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: loaded: N/A

[fehlix]

Though you didn't use nomodeset, intel drivers are not loaded :

Graphics:
Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: ASUSTeK driver: N/A
...
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: loaded: N/A

That's shown in the QSI, b/c someone recommend video= parameter, which prevents loading KMS driver.
Suggets to gather first information from LiverUSB, to reduce confusion (as it appears to happend with other 70post's confusing thread.
Thanks

[Huckleberry Finn]

someone recommend video= parameter...

"Me" :D

For the same complaint: "booting takes so long time". .. But, in the other thread they were ok with these , same parameters ..

[sisqonrw]

Though you didn't use nomodeset, intel drivers are not loaded :

Graphics:
Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: ASUSTeK driver: N/A
...
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: loaded: N/A

i add it now. the parameters are now

ro quiet nosplash video=SVIDEO-1:d i915.invert_brightness=1

sadly it is slow still now. to open one app takes a lot time. 2 apps at one time is very bad.

[Eadwine Rose]

We're asking every time.

Quick System Info. Run it from the menu, paste in a reply.