Page 13 of 15

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:16 pm
by sisqonrw
Huckleberry Finn wrote: Sun Aug 28, 2022 5:55 pm No, no, that one is just to use temporarily on live session (and when only you "have to" .. to disable the real drivers).


Apply the above command, also:

Code: Select all

sudo rm /etc/X11/xorg.conf.d/*intel.conf
Reboot.
i do both but no file found. i restarted but same low solotion

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:21 pm
by Huckleberry Finn
Ok. Just something's preventing the Intel driver from being loaded.

What about this?

Code: Select all

echo -e 'i915\n\nloop' | sudo tee /etc/modules
Reboot.

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:28 pm
by sisqonrw
Huckleberry Finn wrote: Sun Aug 28, 2022 6:21 pm Ok. Just something's preventing the Intel driver from being loaded.

What about this?

Code: Select all

echo -e 'i915\n\nloop' | sudo tee /etc/modules
Reboot.
echo -e 'i915\n\nloop' | sudo tee /etc/modules
[sudo] Passwort für Ali:
i915

loop

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:30 pm
by Huckleberry Finn
Ok, just reboot.


If still not:

Code: Select all

sudo modprobe i915 ; sudo update-initramfs -uk all
Reboot.


If not again:

Code: Select all

ll /etc/modprobe.d/

Code: Select all

cat /etc/modprobe.d/blacklist.conf

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:38 pm
by sisqonrw
Huckleberry Finn wrote: Sun Aug 28, 2022 6:30 pm Ok, just reboot.


If still not:

Code: Select all

sudo modprobe i915 ; sudo update-initramfs -uk all
Reboot.


If not again:

Code: Select all

ll /etc/modprobe.d/

Code: Select all

cat /etc/modprobe.d/blacklist.conf
sudo modprobe i915 ; sudo update-initramfs -uk all
[sudo] Passwort für Ali:
update-initramfs: Generating /boot/initrd.img-5.10.0-17-amd64
I: The initramfs will attempt to resume from /dev/sda3
I: (UUID=ac193714-422d-4f72-a1e1-0ea395ba1014)
I: Set the RESUME variable to override this.
update-initramfs: Generating /boot/initrd.img-5.10.0-13-amd64
I: The initramfs will attempt to resume from /dev/sda3
I: (UUID=ac193714-422d-4f72-a1e1-0ea395ba1014)
I: Set the RESUME variable to override this.
result is low resolution

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:40 pm
by Huckleberry Finn
Did you reboot?

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:41 pm
by sisqonrw
Huckleberry Finn wrote: Sun Aug 28, 2022 6:40 pm Did you reboot?
ll /etc/modprobe.d/
insgesamt 44K
-rw-r--r-- 1 root root 154 20. Dez 2019 amd64-microcode-blacklist.conf
-rw-r--r-- 1 root root 180 17. Mai 2021 broadcom-sta-dkms.conf
-rw-r--r-- 1 root root 150 3. Apr 02:52 dkms.conf
-rw-r--r-- 1 root root 103 14. Apr 2019 fbdev-blacklist-nvidia.conf
-rw-r--r-- 1 root root 572 27. Jul 2017 hang-on-shutdown.conf
-rw-r--r-- 1 root root 666 27. Jul 2017 i915-power-saving.conf
-rw-r--r-- 1 root root 154 20. Mär 21:40 intel-microcode-blacklist.conf
-rw-r--r-- 1 root root 335 8. Feb 2018 kfd.conf
-rw-r--r-- 1 root root 358 28. Aug 20:48 live-blacklist.conf
-rw-r--r-- 1 root root 379 10. Feb 2021 mdadm.conf
-rw-r--r-- 1 root root 278 9. Apr 00:27 pc-speaker.conf
Ali@alibaba:~
$ cat /etc/modprobe.d/blacklist.conf
cat: /etc/modprobe.d/blacklist.conf: Datei oder Verzeichnis nicht gefunden

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:42 pm
by sisqonrw
Huckleberry Finn wrote: Sun Aug 28, 2022 6:40 pm Did you reboot?
yes i did but low resolution.

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:43 pm
by Huckleberry Finn
If you boot any live usb (any you like: MX/antiX 32/64) with these boot parameters only, does it boot / work normal now and is the resolution ok there?

( pci=nommconf,nomsi,noaer pcie_aspm=off ) (You can try only pcie_aspm=off if you like)

Re: installed MX 2.1 MX-21.1_x64 so slow

Posted: Sun Aug 28, 2022 6:55 pm
by sisqonrw
Huckleberry Finn wrote: Sun Aug 28, 2022 6:43 pm If you boot any live usb (any you like: MX/antiX 32/64) with these boot parameters only, does it boot / work normal now and is the resolution ok there?

( pci=nommconf,nomsi,noaer pcie_aspm=off ) (You can try only pcie_aspm=off if you like)
with and withou "pci=nommconf,nomsi,noaer pcie_aspm=off " over live usb stick the resolution is high.