Page 1 of 2
Black screen with cursor
Posted: Mon May 20, 2024 2:31 pm
by verstov
Hello all! I recently installed MX, but the bug I want to discuss is crucial for me.
Sometimes I face a black screen, but the mouse cursor is active. It only happens when I try to reconnect the external monitor (everything is okay on boot) and after waking up from sleep mode.
I tried installing the newest kernel, but it had no effect.
What can I do?
Lenovo ideapad 3, AMD Ryzen 3 4300U with Radeon Graphics @ 4x 2.7GHz, last MX with KDE
Re: Black screen with cursor
Posted: Mon May 20, 2024 2:35 pm
by Eadwine Rose
Please share your full Quick System Info, found in the menu. Press the Copy for forum button, then click paste in a reply.. thanks.
Re: Black screen with cursor
Posted: Mon May 20, 2024 2:51 pm
by verstov
Here it is! Thanks
Code: Select all
System:
Kernel: 6.6.11-amd64 [6.6.11-1~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.6.11-amd64 root=UUID=<filter> ro quiet splash amd_iommu=off
init=/lib/systemd/systemd
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: LightDM v: 1.26.0 Distro: MX-23.3_KDE_x64
Libretto January 21 2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Laptop System: LENOVO product: 81W4 v: IdeaPad 3 15ARE05 serial: <superuser required>
Chassis: type: 10 v: IdeaPad 3 15ARE05 serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0R32859WIN serial: <superuser required> UEFI: LENOVO
v: DZCN47WW date: 12/07/2022
Battery:
ID-1: BAT0 charge: 26.2 Wh (87.0%) condition: 30.1/35.0 Wh (85.9%) volts: 8.0 min: 7.5
model: SMP L16M2PB2 type: Li-poly serial: <filter> status: discharging cycles: 255
CPU:
Info: model: AMD Ryzen 3 4300U with Radeon Graphics bits: 64 type: MCP arch: Zen 2 gen: 3
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x60 (96)
stepping: 1 microcode: 0x8600106
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB
L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1510 high: 1949 min/max: 1400/2700 boost: enabled scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 1949 2: 1381 3: 1341 4: 1371 bogomips: 21559
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_rstack_overflow mitigation: SMT disabled
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Renoir vendor: Lenovo driver: amdgpu v: kernel arch: GCN-5 code: Vega
process: GF 14nm built: 2017-20 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: eDP-1
empty: HDMI-A-1 bus-ID: 03:00.0 chip-ID: 1002:1636 class-ID: 0300 temp: 29.0 C
Device-2: Syntek Integrated Camera type: USB driver: uvcvideo bus-ID: 1-3:2 chip-ID: 174f:118d
class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 mapped: eDP model: LG Display 0x05e5 built: 2018 res: 1920x1080 hz: 60
dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: AMD Radeon Graphics (renoir LLVM 15.0.6 DRM
3.54 6.6.11-amd64) direct-render: Yes
Audio:
Device-1: AMD Renoir Radeon High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Lenovo driver: N/A
alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x, snd_rpl_pci_acp6x,
snd_pci_ps, snd_sof_amd_rembrandt pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.5
chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.6.11-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel modules: wl pcie:
gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:2725 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-3:2 chip-ID: 8087:0032
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 5 state: up address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 715.41 GiB used: 487.6 GiB (68.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZALQ256HAJD-000L2 size: 238.47 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: AL2QFXV7 temp: 26.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 model: tecmiyo SATA SSD 512GB size: 476.94 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 05A3 scheme: MBR
Partition:
ID-1: / raw-size: 117.01 GiB size: 114.61 GiB (97.95%) used: 71.35 GiB (62.3%) fs: ext4
dev: /dev/nvme0n1p4 maj-min: 259:4
ID-2: /boot raw-size: 1024 MiB size: 1022 MiB (99.80%) used: 275.2 MiB (26.9%) fs: vfat
dev: /dev/nvme0n1p5 maj-min: 259:5
ID-3: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 43.3 MiB (45.2%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 7.81 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 31.5 C mobo: N/A gpu: amdgpu temp: 30.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: 2729 pm: dpkg pkgs: 2707 libs: 1458 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 22
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb https://mxlinux.grena.ge/mxlinux/mx/repo/ bookworm main non-free
2: deb https://mxlinux.grena.ge/mxlinux/mx/repo/ bookworm ahs
Info:
Processes: 326 Uptime: 35m wakeups: 15 Memory: 11.06 GiB used: 4.13 GiB (37.3%) Init: systemd
v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: Black screen with cursor
Posted: Mon May 20, 2024 2:53 pm
by verstov
Also I tried several combinations of standart init/systemd/x11/wayland/lightDM - no results
Re: Black screen with cursor
Posted: Mon May 20, 2024 2:56 pm
by Charlie Brown
verstov wrote: Mon May 20, 2024 2:31 pm... tried installing the newest kernel, ...
Liquorix ?
Re: Black screen with cursor
Posted: Mon May 20, 2024 2:58 pm
by Charlie Brown
If you like we can try such a thing:
Install ARandR (very tiny program which was once ootb) then "when everything's ok" "save as" ... It saves as a .sh file which's already executable ...
... then we can use that script to be applied after every wake-up automatically.
Re: Black screen with cursor
Posted: Mon May 20, 2024 4:04 pm
by verstov
thanks! I'll try it
Re: Black screen with cursor
Posted: Mon May 20, 2024 5:32 pm
by fkam18
I have similar problem with a Live USB installation on KDE.
I don't have a cursor, just blank screen and pressing keyboard mouse doesn't do bring the screen back.
I also set the system not to sleep, and in my case, the hdmi connection is not always there. When I plug the hdmi cable back after quite a while, the screen just blank.
Re: Black screen with cursor
Posted: Tue May 21, 2024 2:07 am
by Eadwine Rose
Please start your own thread, this is verstov's thread. Thanks.
Re: Black screen with cursor [Solved]
Posted: Tue May 21, 2024 4:17 am
by verstov
It is not an ideal solution, but it works:
I've made .sh file with arandr, but added few srings:
Code: Select all
#!/bin/sh
xrandr -s 0
sleep 0.5
<STRING FROM ARANDR>
Then, I made a shortcut to launch this script.
And now I need to use the shortcut after reconnecting hdmi and after sleep mode