Could not ./configure "Sli3r"

Help for Current Versions of MX
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Forum rules
Post Reply
Message
Author
mattdebauge
Posts: 42
Joined: Wed Jan 04, 2023 8:28 pm

Could not ./configure "Sli3r"

#1 Post by mattdebauge »

Hi,

I downloaded older verson Slic3r because new version won't load after installed via terminal (nala install slic3r). I deleted slic3r then downloaded older version from Slic3r site. Ran terminal and tried to install. No luck. I did with 'old' slic3r just before new release. Same issue...

here what I did

tar xvfz slic3r-linux-x86_64-1-1-7-stable.tar.gz OR tar -xzf slic3r-linux-x86_64-1-1-7-stable.tar.gz works both way.. Did unzipped file to Downloads as Slic3r



$ cd Slic3r
Catty@mx:~/Downloads/Slic3r
$ ./configure
bash: ./configure: No such file or directory
Catty@mx:~/Downloads/Slic3r
$

What give!? Cannot ./configure

Just FYI

Thanks!




Code: Select all

System:
  Kernel: 6.5.0-5mx-ahs-amd64 [6.5.13-1~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.5.0-5mx-ahs-amd64 root=UUID=<filter> ro quiet splash
    init=/lib/systemd/systemd
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.2_x64 Libretto July 31  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop Mobo: ASRock model: 970 Extreme4 serial: <superuser required>
    BIOS: American Megatrends v: P2.80 date: 08/05/2015
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD FX-6300 bits: 64 type: MT MCP arch: Piledriver level: v2 built: 2012-13
    process: GF 32nm family: 0x15 (21) model-id: 2 stepping: 0 microcode: 0x6000852
  Topology: cpus: 1x cores: 6 smt: enabled cache: L1: 288 KiB desc: d-6x16 KiB; i-3x64 KiB
    L2: 6 MiB desc: 3x2 MiB L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 1700 high: 1991 min/max: 1400/3500 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1991 2: 1905 3: 1400 4: 1397 5: 1989 6: 1519
    bogomips: 41906
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Curacao PRO [Radeon R7 370 / R9 270/370 OEM] vendor: ASUSTeK driver: radeon
    v: kernel alternate: amdgpu arch: GCN-1 code: Southern Islands process: TSMC 28nm built: 2011-20
    pcie: gen: 2 speed: 5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports: active: DVI-I-1
    empty: DP-1,DVI-D-1,HDMI-A-1 bus-ID: 01:00.0 chip-ID: 1002:6811 class-ID: 0300 temp: 42.0 C
  Device-2: Logitech Webcam C930e type: USB driver: snd-usb-audio,uvcvideo bus-ID: 3-1:2
    chip-ID: 046d:0843 class-ID: 0102 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: radeon
    unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: radeon display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.48x10.91") s-diag: 523mm (20.6")
  Monitor-1: DVI-I-1 mapped: DVI-0 model: Samsung SyncMaster serial: <filter> built: 2008
    res: 1680x1050 hz: 60 dpi: 99 gamma: 1.2 size: 433x271mm (17.05x10.67") diag: 558mm (22")
    ratio: 16:10, 3:2 modes: max: 1680x1050 min: 720x400
  API: OpenGL v: 4.5 Mesa 22.3.6 renderer: PITCAIRN ( LLVM 15.0.6 DRM 2.50 6.5.0-5mx-ahs-amd64)
    direct-render: Yes
Audio:
  Device-1: AMD SBx00 Azalia vendor: ASRock driver: snd_hda_intel v: kernel bus-ID: 3-1:2
    bus-ID: 00:14.2 chip-ID: 046d:0843 chip-ID: 1002:4383 class-ID: 0102 serial: <filter>
    class-ID: 0403
  Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16 link-max:
    gen: 3 speed: 8 GT/s bus-ID: 01:00.1 chip-ID: 1002:aab0 class-ID: 0403
  Device-3: Logitech Webcam C930e type: USB driver: snd-usb-audio,uvcvideo
  API: ALSA v: k6.5.0-5mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.1 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 link-max: gen: 2 speed: 5 GT/s bus-ID: 06:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: c000 bus-ID: 08:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 9-4:3 chip-ID: 8087:0029
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 200f hci-v: 5.2 rev: 200f
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 238.47 GiB used: 132.08 GiB (55.4%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Netac model: SSD 256GB size: 238.47 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4201 scheme: GPT
Partition:
  ID-1: / raw-size: 238.22 GiB size: 233.43 GiB (97.99%) used: 132.08 GiB (56.6%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 37.8 C mobo: N/A gpu: radeon temp: 41.0 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2718 libs: 1513 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
    1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb https://mirror.us.oneandone.net/linux/distributions/mx/packages/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/slack.list
    1: deb https://packagecloud.io/slacktechnologies/slack/debian/ jessie main
  No active apt repos in: /etc/apt/sources.list.d/steam-beta.list
  Active apt repos in: /etc/apt/sources.list.d/steam-stable.list
    1: deb [arch=amd64,i386 signed-by=/usr/share/keyrings/steam.gpg] https://repo.steampowered.com/steam/ stable steam
    2: deb-src [arch=amd64,i386 signed-by=/usr/share/keyrings/steam.gpg] https://repo.steampowered.com/steam/ stable steam
  Active apt repos in: /etc/apt/sources.list.d/vscode.list
    1: deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main
Info:
  Processes: 285 Uptime: 55m wakeups: 2 Memory: 15.58 GiB used: 2.29 GiB (14.7%) Init: systemd
  v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Top
User avatar
timkb4cq
Developer
Posts: 3633
Joined: Wed Jul 12, 2006 4:05 pm

Re: Could not ./configure "Sli3r"

#2 Post by timkb4cq »

Perhaps try their instructions here?
https://github.com/slic3r/Slic3r/wiki/R ... d-slic3r-c
HP Pavillion TP01, AMD Ryzen 3 5300G (quad core), Crucial 500GB SSD, Toshiba 6TB 7200rpm
Dell Inspiron 15, AMD Ryzen 7 2700u (quad core). Sabrent 500GB nvme, Seagate 1TB
Top
User avatar
Stevo
Developer
Posts: 14931
Joined: Fri Dec 15, 2006 7:07 pm

Re: Could not ./configure "Sli3r"

#3 Post by Stevo »

The repo version also needs a lot of recommended packages to work correctly, especially with the GUI. You can enable that easily in MXPI, or with a little research if you prefer the terminal.
MXPI = MX Package Installer
QSI = Quick System Info from menu
The MX Test repository is mostly backports; not the same as Debian testing
Top
mattdebauge
Posts: 42
Joined: Wed Jan 04, 2023 8:28 pm

Re: Could not ./configure "Sli3r"

#4 Post by mattdebauge »

I was able to run Slic3r similar to appimage ( I downloaded appimage and it didn't work after I checkmarked as "allow this file to run as a program".. I downloaded Slicer.targz then unzipped thru terminal... In downloads, on Slic3r folder, I navigated to Slic3r/bin/ folder and find slic3r with "gear" icon. I right clicked it then property and checked marked to run as program..

It worked but that's if I need to use it.

I downloaded slic3r thru MX Package Installer--Enabled Repos then
I tried to run slic3r in terminal "slic3r --gui", nothing happened.

Will figure it out what Timkb4cq suggested me to..

Thanks
Top
User avatar
Stevo
Developer
Posts: 14931
Joined: Fri Dec 15, 2006 7:07 pm

Re: Could not ./configure "Sli3r"

#5 Post by Stevo »

mattdebauge wrote: Thu Apr 11, 2024 2:51 am I was able to run Slic3r similar to appimage ( I downloaded appimage and it didn't work after I checkmarked as "allow this file to run as a program".. I downloaded Slicer.targz then unzipped thru terminal... In downloads, on Slic3r folder, I navigated to Slic3r/bin/ folder and find slic3r with "gear" icon. I right clicked it then property and checked marked to run as program..

It worked but that's if I need to use it.

I downloaded slic3r thru MX Package Installer--Enabled Repos then
I tried to run slic3r in terminal "slic3r --gui", nothing happened.

Will figure it out what Timkb4cq suggested me to..

Thanks

In MXPI, check off the box to also install recommended packages...or did you try this and it did not work?
MXPI = MX Package Installer
QSI = Quick System Info from menu
The MX Test repository is mostly backports; not the same as Debian testing
Top
mattdebauge
Posts: 42
Joined: Wed Jan 04, 2023 8:28 pm

Re: Could not ./configure "Sli3r"

#6 Post by mattdebauge »

I did look for it and it seem I don't have "recommended Package" It sound like it's for Raspberry pi OS (Debian). I checked MX Package installer and indeed it have Slic3r software. Just installed and ran it. It apparently an old Slic3r. I can always configure it. I just posted question abou Appimag issue on MX Respin. Hope someone will tell me what I need to do to fix it.
Thankyou
Top
User avatar
Stevo
Developer
Posts: 14931
Joined: Fri Dec 15, 2006 7:07 pm

Re: Could not ./configure "Sli3r"

#7 Post by Stevo »

I apologize, that particular setting in in MX tool "Tweak", under the "Other" tab.

Slic3r 1.3.0 is the current release, same as in Bookworm's repos.

Do you know if prusa-slicer could work for you? https://packages.debian.org/bookworm/prusa-slicer
MXPI = MX Package Installer
QSI = Quick System Info from menu
The MX Test repository is mostly backports; not the same as Debian testing
Top
Post Reply

Return to “MX Help”