
(Risolto) Problema con audio analogico e digitale
(Risolto) Problema con audio analogico e digitale
Buona sera a tutti, ho un piccolo problema con l'audio su MX Linux 23.2 Libretto, ho un monitor collegato tramite cavo HDMI alla scheda video senza casse integrate, di tanto in tanto l'audio analogico fa uno switch sulla periferica HDMI in autonomia, in questo modo l'audio del pc non si sente più, metto foto, non riesco a risolvere questo problema, vi ringrazio.


Last edited by Maurizio on Sun Mar 31, 2024 8:02 am, edited 1 time in total.
Re: Problema con audio analogico e digitale
Avremo bisogno del profilo completo del tuo computer prima di poter procedere, quindi dovrai pubblicare l'output dall'utilità QSI. L'utilità Quick System Info (QSI) si trova in MX Tools e il suo output viene formattato automaticamente per l'uso qui nel forum. Esegui l'utilità QSI, fai clic su "Copia per forum" in basso e incollala qui nel thread.
Regole del forum
Regole del forum
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;
In Linux, newer isn't always better. The best solution is the one that works.
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;
In Linux, newer isn't always better. The best solution is the one that works.
Re: Problema con audio analogico e digitale
Code: Select all
Snapshot created on: 20240315_0126
System:
Kernel: 6.1.0-18-amd64 [6.1.76-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64 root=UUID=<filter> ro quiet splash
loglevel=0
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23.2_x64 Libretto January 21 2024 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Desktop Mobo: ASUSTeK model: P8P67 v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 3602 date: 11/01/2012
CPU:
Info: model: Intel Core i5-2400 bits: 64 type: MCP arch: Sandy Bridge gen: core 2 level: v2
built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB
L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 1698 high: 1764 min/max: 1600/3100 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 1679 2: 1673 3: 1679 4: 1764 bogomips: 24881
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GF108 [GeForce GT 430] vendor: ASUSTeK driver: nouveau v: kernel non-free:
series: 390.xx+ status: legacy-active (EOL~late 2022) arch: Fermi code: GF1xx process: 40/28nm
built: 2010-16 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: HDMI-A-1
empty: DVI-I-1,VGA-1 bus-ID: 01:00.0 chip-ID: 10de:0de1 class-ID: 0300 temp: 36.0 C
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: nouveau gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Philips PHL 241V8 serial: <filter> built: 2021
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.3 Mesa 22.3.6 renderer: NVC1 direct-render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: ASUSTeK 6
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403
Device-2: NVIDIA GF108 High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:0bea class-ID: 0403
API: ALSA v: k6.1.0-18-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK P8P67 and other
motherboards driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000
bus-ID: 05:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: ASUSTek Bluetooth Adapter type: USB driver: btusb v: 0.8 bus-ID: 5-1.7:4
chip-ID: 0b05:179c class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 2.0 lmp-v: 3.0
sub-v: 9999 hci-v: 3.0 rev: 9999
Info: acl-mtu: 1022:8 sco-mtu: 121:3 link-policy: rswitch hold sniff
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 1.03 TiB used: 337.92 GiB (32.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD1002FAEX-00Z3A0 size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A serial: <filter> rev: 1D05
scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Verbatim model: Vi550 S3 size: 119.24 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 4A0 scheme: GPT
Partition:
ID-1: / raw-size: 20.23 GiB size: 19.74 GiB (97.60%) used: 11.95 GiB (60.5%) fs: ext4
dev: /dev/sdb2 maj-min: 8:18
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 6.2 MiB (2.4%) fs: vfat
dev: /dev/sdb1 maj-min: 8:17
ID-3: /home raw-size: 98.76 GiB size: 96.65 GiB (97.86%) used: 48.95 GiB (50.7%) fs: ext4
dev: /dev/sdb3 maj-min: 8:19
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 6.8 MiB (0.2%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 39.0 C mobo: N/A gpu: nouveau temp: 36.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2267 libs: 1147 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://it.mxrepo.com/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/protonvpn-stable.list
1: deb [arch="all", signed-by=/usr/share/keyrings/protonvpn-stable-archive-keyring.gpg] https://repo.protonvpn.com/debian stable main
Info:
Processes: 239 Uptime: 3h 13m wakeups: 1 Memory: 7.72 GiB used: 4.78 GiB (61.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: Problema con audio analogico e digitale
Per favore posta marca e modello del monitor.
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;
In Linux, newer isn't always better. The best solution is the one that works.
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;
In Linux, newer isn't always better. The best solution is the one that works.
Re: Problema con audio analogico e digitale
Code: Select all
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Philips PHL 241V8 serial: <filter> built: 2021
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
Re: Problema con audio analogico e digitale
@Maurizio
Secondo le specifiche riportate qui:
https://www.displayspecifications.com/e ... e_vignette
il monitor dispone di un jack di uscita audio da 3,5 mm. Prova a collegare gli altoparlanti lì e vedi se il problema è stato risolto.
Secondo le specifiche riportate qui:
https://www.displayspecifications.com/e ... e_vignette
il monitor dispone di un jack di uscita audio da 3,5 mm. Prova a collegare gli altoparlanti lì e vedi se il problema è stato risolto.
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;
In Linux, newer isn't always better. The best solution is the one that works.
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;
In Linux, newer isn't always better. The best solution is the one that works.
Re: Problema con audio analogico e digitale
Ho fatto come mi hai suggerito e in effetti adesso l'audio si sente, ho visto che è cambiata anche la prima voce che adesso è "Audio interno stereo digitale" al posto di "Audio interno stereo analogico", comunque impostato su .... (HDMI 4) si sente perfettamente, metto risolto nella speranza adesso non switcha su "Audio interno stereo digitale" perchè in questo caso l'audio non si sente. Ti ringrazio per l'aiuto e buone feste.

