Nitrokey

Message
Author
User avatar
supertevran
Posts: 1
Joined: Sun Nov 26, 2023 12:42 pm

Nitrokey

#1 Post by supertevran »

Hallo. Hier mal mein System:

Code: Select all

System:
  Kernel: 6.1.0-16-amd64 [6.1.67-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-16-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.1_x64 Libretto October 15  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop Mobo: ASRock model: A300M-STX serial: <superuser required>
    UEFI: American Megatrends v: P3.70B date: 03/26/2021
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard K540/K545 serial: <filter>
    charge: 100% (should be ignored) rechargeable: yes status: discharging
  Device-2: hidpp_battery_1 model: Logitech Wireless Mouse serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Athlon 200GE with Radeon Vega Graphics bits: 64 type: MT MCP arch: Zen level: v3
    note: check built: 2017-19 process: GF 14nm family: 0x17 (23) model-id: 0x11 (17) stepping: 0
    microcode: 0x8101013
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 192 KiB
    desc: d-2x32 KiB; i-2x64 KiB L2: 1024 KiB desc: 2x512 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 1580 high: 1599 min/max: 1600/3200 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1598 2: 1591 3: 1599 4: 1533 bogomips: 25599
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT vulnerable
  Type: spec_rstack_overflow mitigation: safe RET
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Mobile Series] driver: amdgpu v: kernel
    arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: DP-1,HDMI-A-1 empty: DP-2 bus-ID: 03:00.0 chip-ID: 1002:15dd class-ID: 0300
    temp: 46.0 C
  Device-2: KYE Systems (Mouse Systems) PC-LM1E Camera type: USB driver: snd-usb-audio,uvcvideo
    bus-ID: 1-3.2.1:5 chip-ID: 0458:6006 class-ID: 0102 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: amdgpu
    unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 3737x1680 s-dpi: 96 s-size: 989x445mm (38.94x17.52") s-diag: 1085mm (42.7")
  Monitor-1: DP-1 mapped: DisplayPort-0 pos: primary,left model: LG (GoldStar) HDR 4K
    serial: <filter> built: 2022 res: 2688x1512 hz: 60 dpi: 114 gamma: 1.2
    size: 600x340mm (23.62x13.39") diag: 690mm (27.2") ratio: 16:9 modes: max: 3840x2160
    min: 640x480
  Monitor-2: HDMI-A-1 mapped: HDMI-A-0 pos: right model: Dell 2005FPW serial: <filter>
    built: 2006 res: 1050x1680 hz: 60 dpi: 99 gamma: 1.2 size: 270x434mm (10.63x17.09")
    diag: 511mm (20.1") ratio: 16:10 modes: max: 1680x1050 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon Vega 3 Graphics (raven LLVM 15.0.6 DRM
    3.49 6.1.0-16-amd64) direct-render: Yes
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
    bus-ID: 1-3.2.1:5 gen: 3 chip-ID: 0458:6006 speed: 8 GT/s class-ID: 0102 lanes: 16
    serial: <filter> bus-ID: 03:00.1 chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: ASRock driver: snd_hda_intel v: kernel pcie:
    gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Device-3: KYE Systems (Mouse Systems) PC-LM1E Camera type: USB driver: snd-usb-audio,uvcvideo
  Device-4: ASUSTek Xonar U1 Audio Station type: USB driver: hid-generic,snd-usb-audio,usbhid
    bus-ID: 1-3.2.2:6 chip-ID: 0b05:1743 class-ID: 0300
  Device-5: GN Netcom DELL PRO STEREO HEADSET UC150 type: USB driver: jabra,snd-usb-audio,usbhid
    bus-ID: 1-3.2.4.2:9 chip-ID: 0b0e:a50c class-ID: 0300 serial: <filter>
  API: ALSA v: k6.1.0-16-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock driver: r8169
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 02:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
    bus-ID: 1-3.2.4.3:10 chip-ID: 0a12:0001 class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: 22bb hci-v: 4.0 rev: 22bb
  Info: acl-mtu: 310:10 sco-mtu: 64:8 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 447.14 GiB used: 18.26 GiB (4.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: Emtec X150 240GB size: 223.57 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 936
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT240BX500SSD1 size: 223.57 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: R013 scheme: GPT
Partition:
  ID-1: / raw-size: 194.18 GiB size: 190.07 GiB (97.88%) used: 18.26 GiB (9.6%) fs: ext4
    dev: /dev/sda4 maj-min: 8:4
  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 6.1 MiB (1.2%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 977 MiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3
    maj-min: 8:3
  ID-2: swap-2 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -3 file: /swap
Sensors:
  System Temperatures: cpu: 46.4 C mobo: N/A gpu: amdgpu temp: 46.0 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2577 libs: 1436 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/pbs-client.list
    1: deb http://download.proxmox.com/debian/pbs-client bookworm main
Info:
  Processes: 262 Uptime: 19m wakeups: 11 Memory: 13.58 GiB used: 2.16 GiB (15.9%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

Mein Nitrokey Pro wird leider nicht erkannt. In der Nitrokey App ist alles ok aber:

$ gpg --card-status
gpg: WARNUNG: Unsichere Zugriffsrechte des Home-Verzeichnis `/home/123456/.gnupg'
gpg: selecting card failed: Kein passendes Gerät gefunden
gpg: OpenPGP Karte ist nicht vorhanden: Kein passendes Gerät gefunden

Und so kann ich keine Emails wie gehabt in Evolution signieren ... was kann da bloss schief sein? Danke für alle Hinweise.
Last edited by supertevran on Sat Dec 23, 2023 3:23 pm, edited 2 times in total.

User avatar
Eadwine Rose
Administrator
Posts: 15164
Joined: Wed Jul 12, 2006 2:10 am

Re: Nitrokey

#2 Post by Eadwine Rose »

Wenn Sie Quick-System-Informationen weitergeben, geben Sie bitte die VOLLSTÄNDIGE QSI an, danke.
MX-23.6_x64 July 31 2023 * 6.1.0-38amd64 ext4 Xfce 4.20.0 * 8-core AMD Ryzen 7 2700
Asus TUF B450-Plus Gaming UEFI * Asus GTX 1050 Ti Nvidia 535.247.01 * 2x16Gb DDR4 2666 Kingston HyperX Predator
Samsung 870EVO * Samsung S24D330 & P2250 * HP Envy 5030

Post Reply

Return to “Deutsches Forum”