In meinem System habe ich alle Energiesparoptionen deaktiviert (siehe Bild 01, 02 und 03).
Wenn ich die Software Shortwave, ein Internetstream "Radio", starte (Bild 00), dann wird trotzdem immer nach 10min der Bildschirm schwarz und der Ton geht aus.
Wenn ich mit dem PlexMediaServer einen Film schaue oder Musik höre, passiert das nicht. Der PlexMediaPlayer läuft als WebApp im Browserfenster.
Woran kann das liegen?
Code: Select all
System:
Kernel: 6.1.0-13-amd64 [6.1.55-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-13-amd64 root=UUID=<filter> ro splash quiet
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23.1_x64 Libretto July 31 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Mini-pc System: Intel Client Systems product: NUC7PJYH v: J67992-403
serial: <superuser required> Chassis: Intel Corporation type: 35 v: 2.0
serial: <superuser required>
Mobo: Intel model: NUC7JYB v: J67969-403 serial: <superuser required> UEFI: Intel
v: JYGLKCPX.86A.0068.2022.0608.1913 date: 06/08/2022
CPU:
Info: model: Intel Pentium Silver J5005 bits: 64 type: MCP arch: Goldmont Plus level: v2
built: 2017 process: Intel 14nm family: 6 model-id: 0x7A (122) stepping: 1 microcode: 0x3E
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 224 KiB desc: d-4x24 KiB; i-4x32 KiB
L2: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1002 high: 1052 min/max: 800/2800 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 1051 2: 896 3: 1012 4: 1052 bogomips: 11980
Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel GeminiLake [UHD Graphics 605] driver: i915 v: kernel arch: Gen-9
process: Intel 14n built: 2015-16 ports: active: HDMI-A-1 empty: HDMI-A-2 bus-ID: 00:02.0
chip-ID: 8086:3184 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Panasonic Panasonic-TV serial: <filter> built: 2018
res: 1920x1080 hz: 60 dpi: 70 gamma: 1.2 size: 698x392mm (27.48x15.43") diag: 1469mm (57.8")
ratio: 16:9 modes: max: 1920x1080 min: 640x480
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel UHD Graphics 605 (GLK 3) direct-render: Yes
Audio:
Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_apl bus-ID: 00:0e.0 chip-ID: 8086:3198
class-ID: 0403
API: ALSA v: k6.1.0-13-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Gemini Lake PCH CNVi WiFi driver: iwlwifi v: kernel modules: wl bus-ID: 00:0c.0
chip-ID: 8086:31dc class-ID: 0280
IF: wlan0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Intel driver: r8169
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB driver: btusb v: 0.8
bus-ID: 1-9:3 chip-ID: 8087:0aaa class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
sub-v: 100 hci-v: 5.1 rev: 100
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 232.89 GiB used: 14.14 GiB (6.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 250GB size: 232.89 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 4B6Q
scheme: GPT
Partition:
ID-1: / raw-size: 116.32 GiB size: 113.93 GiB (97.95%) used: 13.39 GiB (11.8%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 116.32 GiB size: 113.93 GiB (97.95%) used: 765.2 MiB (0.7%) fs: ext4
dev: /dev/sda3 maj-min: 8:3
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 38.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2085 pm: dpkg pkgs: 2079 libs: 1050 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 6
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.easyname.ch/mxlinux-packages/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/plex-mx.list
1: deb https://downloads.plex.tv/repo/deb public main
Info:
Processes: 217 Uptime: 25m wakeups: 1 Memory: 7.35 GiB used: 1.51 GiB (20.5%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI