[SOLVED] Can't boot MX-23 after clean install on SSD
Posted: Sat Sep 02, 2023 2:20 pm
Hi all,
I am typing from my MX21 USB flash drive with snapshot dated late Aug. 2023. Using Gparted, all the partitions looked fine but just no boot. Don't know enough about the GRUB thing but could the update / fresh install messed up GRUB. Here is my system info:
[/code]
Appreciate all the help from the experts. Best regards.
I am typing from my MX21 USB flash drive with snapshot dated late Aug. 2023. Using Gparted, all the partitions looked fine but just no boot. Don't know enough about the GRUB thing but could the update / fresh install messed up GRUB. Here is my system info:
Code: Select all
[CODE]Snapshot created on: 20230826_1255
System: Kernel: 5.10.0-23-amd64 [5.10.179-3] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/antiX/vmlinuz quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower August 26 2023
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: P8Z77-V DELUXE v: Rev 1.xx serial: <filter>
UEFI: American Megatrends v: 2104 date: 08/13/2013
Battery: Device-1: hidpp_battery_0 model: Logitech Marathon Mouse/Performance Plus M705
serial: <filter> charge: 100% (should be ignored) rechargeable: yes status: Discharging
CPU: Info: Quad Core model: Intel Core i5-3570K bits: 64 type: MCP arch: Ivy Bridge
family: 6 model-id: 3A (58) stepping: 9 microcode: 17 cache: L2: 6 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 27281
Speed: 1731 MHz min/max: 1600/3800 MHz Core speeds (MHz): 1: 1731 2: 1714 3: 1745
4: 1775
Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: Sapphire Limited driver: amdgpu v: kernel bus-ID: 01:00.0 chip-ID: 1002:67df
class-ID: 0300
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver:
loaded: amdgpu,ati unloaded: fbdev,modesetting,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.7x15.0")
s-diag: 777mm (30.6")
Monitor-1: DisplayPort-1 res: 2560x1440 hz: 60 dpi: 93 size: 698x393mm (27.5x15.5")
diag: 801mm (31.5")
OpenGL:
renderer: Radeon RX 570 Series (POLARIS10 DRM 3.40.0 5.10.0-23-amd64 LLVM 11.0.1)
v: 4.6 Mesa 20.3.5 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: Sapphire Limited driver: snd_hda_intel v: kernel bus-ID: 01:00.1
chip-ID: 1002:aaf0 class-ID: 0403
Sound Server-1: ALSA v: k5.10.0-23-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Intel 82579V Gigabit Network vendor: ASUSTeK P8P67 Deluxe driver: e1000e
v: kernel port: f040 bus-ID: 00:19.0 chip-ID: 8086:1503 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel modules: wl port: e000
bus-ID: 07:00.0 chip-ID: 8086:095a class-ID: 0280
IF: wlan0 state: up mac: <filter>
Device-3: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK P8 series driver: r8169 v: kernel port: b000 bus-ID: 0c:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth1 state: down mac: <filter>
Bluetooth: Device-1: ASUSTek BCM20702A0 type: USB driver: btusb v: 0.8 bus-ID: 7-1.1:3
chip-ID: 0b05:17b5 class-ID: fe01 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 220e hci-v: 4.0 rev: 15bc
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 3.35 TiB used: 15.33 GiB (0.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: 2B6Q scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD740GD-00FLC0
size: 69.25 GiB block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s type: N/A
serial: <filter> rev: 8F33 scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital model: WD740GD-00FLC0
size: 69.25 GiB block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s type: N/A
serial: <filter> rev: 8F33 scheme: GPT
ID-4: /dev/sdd maj-min: 8:48 vendor: Western Digital model: WD30EFRX-68AX9N0
size: 2.73 TiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s type: N/A
serial: <filter> rev: 0A80 scheme: GPT
ID-5: /dev/sde maj-min: 8:64 type: USB vendor: SanDisk model: Cruzer Glide
size: 29.25 GiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter>
rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb4
maj-min: 8:20
ID-2: swap-2 type: partition size: 6.89 GiB used: 0 KiB (0.0%) priority: -3
dev: /dev/sdc3 maj-min: 8:35
Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: amdgpu temp: 36.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 798
Repos: Packages: 1953 note: see --pkg apt: 1944 lib: 932 flatpak: 9
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://mirror.steadfast.net/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://mirror.steadfast.net/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
3: deb-src http://mirror.steadfast.net/debian bullseye main contrib non-free
4: deb http://mirror.steadfast.net/debian bullseye-backports main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb https://mirror.us.oneandone.net/linux/distributions/mx/packages/mx/repo/ bullseye main non-free
Active apt repos in: /etc/apt/sources.list.d/onlyoffice.list
1: deb https://download.onlyoffice.com/repo/debian squeeze main
Info: Processes: 277 Uptime: 20m wakeups: 4 Memory: 15.56 GiB used: 2.34 GiB (15.0%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: N/A
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFIAppreciate all the help from the experts. Best regards.