Updated mx21 to Mx23 Root folder remained MX21

[BGums]

Updated MX21 64 bit to Mx23 64bit.Everything updated but the root folder name remained MX21. How can I rename the root folder to MX23. If possible?

[Eadwine Rose]

Please post your Quick System Info using Copy for forum, thanks.

[BGums]

Code: Select all

System:    Kernel: 6.1.0-10-amd64 [6.1.38-2] x86_64 bits: 64 compiler: gcc v: 12.2.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=<filter> ro quiet splash 
           Desktop: KDE Plasma 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM 
           Distro: MX-23_KDE_x64 Libretto April 9  2022 base: Debian GNU/Linux 12 (bookworm) 
Machine:   Type: Desktop Mobo: ASUSTeK model: Maximus IV GENE-Z v: Rev 1.xx serial: <filter> 
           BIOS: American Megatrends v: 3603 date: 11/09/2012 
CPU:       Info: Quad Core model: Intel Core i7-3770K bits: 64 type: MT MCP arch: Ivy Bridge 
           family: 6 model-id: 3A (58) stepping: 9 microcode: 21 cache: L2: 8 MiB 
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 55998 
           Speed: 1600 MHz min/max: 1600/3900 MHz Core speeds (MHz): 1: 1600 2: 1600 3: 1600 
           4: 1600 5: 1600 6: 1600 7: 1600 8: 1600 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data status: Unknown: No mitigations 
           Type: retbleed status: Not affected 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: 
           conditional, RSB filling, PBRSB-eIBRS: Not affected 
           Type: srbds status: Vulnerable: No microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel IvyBridge GT2 [HD Graphics 4000] vendor: ASUSTeK driver: i915 v: kernel 
           bus-ID: 00:02.0 chip-ID: 8086:0162 class-ID: 0380 
           Device-2: AMD Curacao XT / Trinidad XT [Radeon R7 370 / R9 270X/370X] 
           vendor: PC Partner Limited driver: radeon v: kernel alternate: amdgpu bus-ID: 01:00.0 
           chip-ID: 1002:6810 class-ID: 0300 
           Display: x11 server: X.Org 1.21.1.7 compositor: kwin_x11 driver: 
           loaded: ati,modesetting,radeon unloaded: fbdev,vesa display-ID: :0 screens: 1 
           Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.0x22.5") 
           s-diag: 1165mm (45.9") 
           Monitor-1: HDMI-3 res: 3840x2160 hz: 30 dpi: 52 size: 1872x1053mm (73.7x41.5") 
           diag: 2148mm (84.6") 
           OpenGL: renderer: PITCAIRN ( LLVM 15.0.6 DRM 2.50 6.1.0-10-amd64) v: 4.5 Mesa 22.3.6 
           direct render: Yes 
Audio:     Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: ASUSTeK 
           driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403 
           Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series] 
           vendor: PC Partner Limited driver: snd_hda_intel v: kernel bus-ID: 01:00.1 
           chip-ID: 1002:aab0 class-ID: 0403 
           Sound Server-1: ALSA v: k6.1.0-10-amd64 running: yes 
           Sound Server-2: PulseAudio v: 16.1 running: yes 
Network:   Device-1: Intel 82579V Gigabit Network vendor: ASUSTeK P8P67 Deluxe driver: e1000e 
           v: kernel port: f080 bus-ID: 00:19.0 chip-ID: 8086:1503 class-ID: 0200 
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter> 
Drives:    Local Storage: total: 2.27 TiB used: 42.33 GiB (1.8%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10EZEX-60WN4A1 
           size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD 
           rpm: 7200 serial: <filter> rev: 1A03 scheme: MBR 
           ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD10EZEX-00RKKA0 
           size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: N/A 
           serial: <filter> rev: 0A80 scheme: MBR 
           ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital model: WD5001AALS-00J7B1 
           size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: N/A 
           serial: <filter> rev: 0K05 scheme: MBR 
Partition: ID-1: / raw-size: 923.5 GiB size: 907.93 GiB (98.31%) used: 42.33 GiB (4.7%) fs: ext4 
           dev: /dev/sdb1 maj-min: 8:17 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sdb2 
           maj-min: 8:18 
Sensors:   System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: radeon temp: 35.0 C 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2476 lib: 1364 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ bookworm-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ bookworm non-free-firmware contrib main non-free
           2: deb http://security.debian.org/debian-security/ bookworm-security main contrib non-free-firmware
           3: deb http://deb.debian.org/debian/ bookworm-backports main contrib non-free-firmware
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mirror.it.ubc.ca/mxlinux/mx/repo/ bookworm non-free main
           2: deb http://mirror.it.ubc.ca/mxlinux/mx/repo/ bookworm ahs
Info:      Processes: 253 Uptime: 35m wakeups: 0 Memory: 15.52 GiB used: 1.99 GiB (12.8%) 
           Init: systemd v: 252 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 12.2.0 
           alt: 10/12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.06 
Boot Mode: BIOS (legacy, CSM, MBR)

[Charlie Brown]

I guess you mean the "label" of the partition. You can boot with live usb and do it with GParted from menu (when that/those partitions are not mounted ... right-click ...). It's also possible with cli.

[BGums]

Thanks.

[Charlie Brown]

You're welcome :)

[Charlie Brown]

In the meantime you can give any label you like, just prefer to not use space (that causes some issues later).. also while you're at it label your data partitions etc. as well (like DATA etc..) , that will make easy to recognize them everywhere.

[BGums]

Thanks Again . All well. That was my last issue.