Page 1 of 3
Trouble installing packages
Posted: Tue May 23, 2023 7:42 am
by kloos
Hi all,
I've done something and it's broken the package installer. When I try to install anything I get a message like this. In this case I am trying to install Strawberry. Any help would be happily received
E: rtl8821ce-dkms: installed rtl8821ce-dkms package post-installation script subprocess returned error exit status 10
Re: Trouble installing packages
Posted: Tue May 23, 2023 8:14 am
by j2mcgreg
We need your computer’s complete profile before we can proceed, so you need to post the output from the QSI utility. The Quick System Info (QSI) utility is located in MX Tools and its output is automatically formatted for use here in the forum. Run the QSI utility, click “Copy for Forum” at the bottom and then just paste it here in your thread.
Forum Rules
Re: Trouble installing packages
Posted: Tue May 23, 2023 8:16 am
by kloos
sure, here it is...
Code: Select all
System: Kernel: 6.1.0-0.deb11.5-amd64 [6.1.12-1~bpo11+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-0.deb11.5-amd64
root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower January 15 2023
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: Dell product: Latitude E6430 v: 01 serial: <filter> Chassis:
type: 9 serial: <filter>
Mobo: Dell model: 0CPWYR v: A00 serial: <filter> BIOS: Dell v: A24 date: 08/08/2019
Battery: ID-1: BAT0 charge: 4.5 Wh (100.0%) condition: 4.5/62.2 Wh (7.2%) volts: 12.0 min: 11.1
model: LGC-LGC2.8 DELL HMYXT3A type: Li-ion serial: <filter> status: Full
CPU: Info: Dual Core model: Intel Core i5-3340M bits: 64 type: MT MCP arch: Ivy Bridge
family: 6 model-id: 3A (58) stepping: 9 microcode: 21 cache: L2: 3 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 21528
Speed: 1785 MHz min/max: 1200/3400 MHz Core speeds (MHz): 1: 1841 2: 1888 3: 2272
4: 1746
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP:
conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel 3rd Gen Core processor Graphics vendor: Dell driver: i915 v: kernel
bus-ID: 00:02.0 chip-ID: 8086:0166 class-ID: 0300
Device-2: Microdia Laptop_Integrated_Webcam_E4HD type: USB driver: uvcvideo
bus-ID: 1-1.5:4 chip-ID: 0c45:6449 class-ID: 0e02
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver:
loaded: modesetting unloaded: fbdev,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: LVDS-1 res: 1366x768 hz: 60 dpi: 112 size: 309x174mm (12.2x6.9")
diag: 355mm (14")
OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) v: 4.2 Mesa 20.3.5
compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
Sound Server-1: ALSA v: k6.1.0-0.deb11.5-amd64 running: yes
Sound Server-2: PulseAudio v: 15.0 running: yes
Sound Server-3: PipeWire v: 0.3.65 running: no
Network: Device-1: Intel 82579LM Gigabit Network vendor: Dell driver: e1000e v: kernel
port: f080 bus-ID: 00:19.0 chip-ID: 8086:1502 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel
modules: wl port: f040 bus-ID: 02:00.0 chip-ID: 8086:0082 class-ID: 0280
IF: wlan0 state: up mac: <filter>
IF-ID-1: lxcbr0 state: down mac: <filter>
Bluetooth: Device-1: Dell BCM20702A0 Bluetooth Module type: USB driver: btusb v: 0.8
bus-ID: 1-1.4:3 chip-ID: 413c:8197 class-ID: fe01 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 4 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 220e hci-v: 4.0 rev: 1000
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch sniff link-mode: slave accept
service-classes: rendering, capturing, object transfer, audio, telephony
RAID: Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0
port: f060 bus-ID: 00:1f.2 chip-ID: 8086.282a rev: 04 class-ID: 0104
Drives: Local Storage: total: 223.57 GiB used: 63.95 GiB (28.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37240G size: 223.57 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: T1A3 scheme: MBR
Partition: ID-1: / raw-size: 215.56 GiB size: 211.12 GiB (97.94%) used: 63.65 GiB (30.1%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 306.8 MiB (3.7%) priority: -2
dev: /dev/sda2 maj-min: 8:2
Sensors: System Temperatures: cpu: 51.0 C mobo: 36.0 C sodimm: SODIMM C
Fan Speeds (RPM): cpu: 2713
Repos: Packages: 2982 note: see --pkg apt: 2970 lib: 1536 flatpak: 12
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/kubuntu-ppa-ubuntu-backports-mantic.list
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye non-free main
Active apt repos in: /etc/apt/sources.list.d/signal-xenial-added-by-mxpi.list
1: deb [arch=amd64] https://updates.signal.org/desktop/apt/ xenial main
Info: Processes: 246 Uptime: 5h 13m wakeups: 2 Memory: 7.67 GiB used: 4.25 GiB (55.4%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: N/A
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: BIOS (legacy, CSM, MBR)
Re: Trouble installing packages
Posted: Tue May 23, 2023 8:38 am
by j2mcgreg
It may be that your main repository is not as up to date as it should be. You can use Repo Manager in MX Tools to switch to Alblasserdam, The Netherlands which is the closest one to the UK which is owned and operated by the MX Team. After the switch, reboot or log out/ login, update and retry installing that package.
Re: Trouble installing packages
Posted: Tue May 23, 2023 8:49 am
by kloos
I tried that and I re-set to the original APT sources just in case that helped but seems that I have a bigger issue.
E: Unable to correct problems, you have held broken packages.
Re: Trouble installing packages
Posted: Tue May 23, 2023 9:19 am
by j2mcgreg
You can try fixing the broken packages with Synaptic : Edit --> Fix Broken Packages
It also may be that your use of an Ubuntu ppa in the past has irreparably harmed your system. Other than that both are Linux distros and both use the apt packaging system, there are no other commonalities between the two. We advise our users to refrain from accessing ppas because of the potential harm they can cause.
Re: Trouble installing packages
Posted: Tue May 23, 2023 10:00 am
by kloos
Thanks for your help. But Fix Broken Packages didn't do anything. The screen flashed for a split second, but nothing happened.
I am not sure what a ppa is, so if I have used one, it wasn't intentional.
Re: Trouble installing packages
Posted: Tue May 23, 2023 10:47 am
by CharlesV
A ppa is a Personal Package Archive. When you use apt, the areas / locations where software is loaded from. There is a kubuntu ppa in one of your repos, so that is probably what is being referred too. You should make sure that is disabled in the MX Repos .
To clean up broken packages, try these, one at a time in a terminal.
Then
and try to install what you were after.
If it still is not working, then try
and try then update and try to install again.
Re: Trouble installing packages
Posted: Tue May 23, 2023 10:50 am
by j2mcgreg
@kloos wrote:
I am not sure what a ppa is, so if I have used one, it wasn't intentional.
From your QSI:
Code: Select all
No active apt repos in: /etc/apt/sources.list.d/kubuntu-ppa-ubuntu-backports-mantic.list
Do you remember how you obtained that package? It easily could be the broken one.
Re: Trouble installing packages
Posted: Tue May 23, 2023 11:54 am
by kloos
Hmm, I tried installing Amarok from their website, so that might be the reason. It didn't install so I just moved on to another music player.
I tried the clean options but they didn't make a difference.