wifi does not connect automatic mx kde

[luigi lins]

wifi does not connect mx automatic kde

I installed the system update and it doesn't automatically recognize the wifi

the distro is blocking the wi-fi ports in the manager

after restarting linux mx kde the wi-fi does not connect automatically

which procedure recognizes automatic wifi?

[j2mcgreg]

We need your computer’s complete profile before we can proceed, so you need to post the output from the QSI utility. The Quick System Info (QSI) utility is located in MX Tools and its output is automatically formatted for use here in the forum. Run the QSI utility, click “Copy for Forum” at the bottom and then just paste it here in your thread.
Forum Rules

[luigi lins]

I went back to normal linux mx kernel 6.0 distro

Code: Select all

System:    Kernel: 6.0.0-6mx-amd64 [6.0.12-1~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/vmlinuz-6.0.0-6mx-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-21.3_ahs_x64 Wildflower January 15  2023 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: Acer product: Aspire A515-51G v: V2.02 serial: <filter> 
           Mobo: KBL model: Charmander_KL v: V2.02 serial: <filter> UEFI-[Legacy]: Insyde v: 2.02 
           date: 01/03/2019 
Battery:   ID-1: BAT1 charge: 23.4 Wh (68.8%) condition: 34.0/48.9 Wh (69.6%) volts: 14.8 
           min: 15.2 model: LG 004B384234314341 type: Li-ion serial: <filter> status: Discharging 
CPU:       Info: Dual Core model: Intel Core i7-7500U bits: 64 type: MT MCP arch: Amber/Kaby Lake 
           note: check family: 6 model-id: 8E (142) stepping: 9 microcode: F0 cache: L2: 4 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 23199 
           Speed: 800 MHz min/max: 400/2700 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable 
           Type: retbleed mitigation: IBRS 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: Not affected 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel HD Graphics 620 vendor: Acer Incorporated ALI driver: i915 v: kernel 
           bus-ID: 00:02.0 chip-ID: 8086:5916 class-ID: 0300 
           Device-2: NVIDIA GM108M [GeForce 940MX] vendor: Acer Incorporated ALI driver: nvidia 
           v: 520.56.06 bus-ID: 01:00.0 chip-ID: 10de:134d class-ID: 0302 
           Device-3: Quanta HD Webcam type: USB driver: uvcvideo bus-ID: 1-7:5 chip-ID: 0408:a060 
           class-ID: 0e02 serial: <filter> 
           Display: x11 server: X.Org 1.20.14 compositor: xfwm4 v: 4.18.0 driver: 
           loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa alternate: nv display-ID: :0.0 
           screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: eDP-1 res: 1920x1080 hz: 60 dpi: 142 size: 344x193mm (13.5x7.6") 
           diag: 394mm (15.5") 
           OpenGL: renderer: Mesa Intel HD Graphics 620 (KBL GT2) v: 4.6 Mesa 22.0.5 
           direct render: Yes 
Audio:     Device-1: Intel Sunrise Point-LP HD Audio vendor: Acer Incorporated ALI 
           driver: snd_hda_intel v: kernel alternate: snd_soc_skl bus-ID: 00:1f.3 
           chip-ID: 8086:9d71 class-ID: 0403 
           Sound Server-1: ALSA v: k6.0.0-6mx-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
           Sound Server-3: PipeWire v: 0.3.19 running: no 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
           vendor: Acer Incorporated ALI driver: r8169 v: kernel port: 3000 bus-ID: 02:00.1 
           chip-ID: 10ec:8168 class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
           Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: Lite-On 
           driver: ath10k_pci v: kernel modules: wl port: 3000 bus-ID: 03:00.0 chip-ID: 168c:0042 
           class-ID: 0280 
           IF: wlan0 state: up mac: <filter> 
           IF-ID-1: ipv6leakintrf0 state: unknown speed: N/A duplex: N/A mac: <filter> 
           IF-ID-2: proton0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-3: pvpnksintrf0 state: unknown speed: N/A duplex: N/A mac: <filter> 
Bluetooth: Device-1: Lite-On Qualcomm Atheros QCA9377 Bluetooth type: USB driver: btusb v: 0.8 
           bus-ID: 1-5:4 chip-ID: 04ca:3015 class-ID: e001 
           Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2 
           sub-v: 25a hci-v: 4.2 
           Info: acl-mtu: 1024:8 sco-mtu: 50:8 link-policy: rswitch hold sniff 
           link-mode: slave accept service-classes: rendering, capturing, object transfer, audio 
Drives:    Local Storage: total: 447.13 GiB used: 67.82 GiB (15.2%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37480G size: 447.13 GiB 
           block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> 
           rev: 61K1 scheme: GPT 
Partition: ID-1: / raw-size: 106.53 GiB size: 104.3 GiB (97.90%) used: 7.79 GiB (7.5%) fs: ext4 
           dev: /dev/dm-0 maj-min: 253:0 mapped: root.fsm 
           ID-2: /boot raw-size: 6.64 GiB size: 6.44 GiB (97.05%) used: 131 MiB (2.0%) fs: ext4 
           dev: /dev/sda3 maj-min: 8:3 
           ID-3: /home raw-size: 106.53 GiB size: 104.3 GiB (97.90%) used: 14.1 GiB (13.5%) 
           fs: ext4 dev: /dev/dm-2 maj-min: 253:2 mapped: 1.home.fsm 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 7.99 GiB used: 2 MiB (0.0%) priority: -2 
           dev: /dev/dm-1 maj-min: 253:1 mapped: swap 
Sensors:   System Temperatures: cpu: 29.8 C mobo: 27.8 C 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2272 lib: 1184 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mirror.ufam.edu.br/mx/mx/repo/ bullseye main non-free
           2: deb http://mirror.ufam.edu.br/mx/mx/repo/ bullseye ahs
           Active apt repos in: /etc/apt/sources.list.d/protonvpn-stable.list 
           1: deb [arch="all", signed-by=/usr/share/keyrings/protonvpn-stable-archive-keyring.gpg] https://repo.protonvpn.com/debian stable main
Info:      Processes: 284 Uptime: 7h 40m wakeups: 2 Memory: 19.43 GiB used: 4.54 GiB (23.4%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06 
Boot Mode: BIOS (legacy, CSM, MBR)

driver wifi : Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver wifi : Device 2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter

kde I gave up because of the wifi does not connect automatically

the driver is the same installed in wifi kde

[j2mcgreg]

Use MXPI to install the 6.1 kernel. The 6.0 kernel you are using is known to be troublesome.

[luigi lins]

I understand the distro can't update the 6.1 kernel in the main update panel?

yes i know the mxpi in the store box has kernel 6.1 there in the store but i'm afraid to install it.

I'm afraid to install third-party 6.1 kernel and cause more problems

[luigi lins]

I will wait for the system to offer to update kernel 6.1 and mesa-git to fix bugs of the wifi internet not running automatically

bug: wifi blocks wifi mx kde drivers and does not connect automatically

need to press wifi button is bad, I will wait for update to connect automatic wifi mx kde linux

thanks

[junoluna]

This has been an issue with KDE since the start but easily fixed

Go to ''Configure network connections >>>>>>>>> General Configuration >>>>>>>>> check ... All Users may connect to this network >>>>>>> apply


Might not be the same issue since yours seems like a new thing butmight help future searchers...

[luigi lins]

okay I will do the tests (all users connect to the network)
I notice, thank you

[MXRobo]

I've seen recommendations on the forum to increase the priority - on Xfce.

[Eadwine Rose]

Moved to appropriate help section, please pay attention. Site help is not where this needed to be. Thanks.