Display issues in Panel and Window Manager
Posted: Sun Feb 19, 2023 4:24 am
Hi, I'm looking for some help with a couple of issues.
1) I've set my panel to have a solid background color of black with an opacity of 75%. It shows that this is what is selected in the panel preferences window, but the panel is a solid black 100% opaque. I've tried switching to other colors and a similar opacity and it's the same thing: the opacity shows in the selected color in preferences, but the panel color is 100% opaque. I should note that for a brief period of time the panel background was correct, and then I tried adjusting the opacity a little and then it did this.
2) In MX Tweaks I have set my Application Theme to Matcha-dark-azul and my Window Manager Theme to Moheli. When I run an application the window displays as expected. However, if I click on a menu item that opens up a child window to the application, this window will open with both themes set to Matcha-dark-azul (most of the time, sometimes it does open as expected; opening a window to compose a message in Thunderbird, for example).
Any help would be appreciated.
QSI:
1) I've set my panel to have a solid background color of black with an opacity of 75%. It shows that this is what is selected in the panel preferences window, but the panel is a solid black 100% opaque. I've tried switching to other colors and a similar opacity and it's the same thing: the opacity shows in the selected color in preferences, but the panel color is 100% opaque. I should note that for a brief period of time the panel background was correct, and then I tried adjusting the opacity a little and then it did this.
2) In MX Tweaks I have set my Application Theme to Matcha-dark-azul and my Window Manager Theme to Moheli. When I run an application the window displays as expected. However, if I click on a menu item that opens up a child window to the application, this window will open with both themes set to Matcha-dark-azul (most of the time, sometimes it does open as expected; opening a window to compose a message in Thunderbird, for example).
Any help would be appreciated.
QSI:
Code: Select all
System: Kernel: 5.18.0-4mx-amd64 [5.18.16-1~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.18.0-4mx-amd64
root=UUID=<filter> ro quiet splash pcie_aspm=off
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_ahs_x64 Wildflower September 18 2022
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: HP product: HP Laptop 15-dw3xxx v: Type1ProductConfigId
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: HP model: 881D v: 50.27 serial: <filter> UEFI: Insyde v: F.53 date: 10/15/2021
Battery: ID-1: BAT1 charge: 37.9 Wh (100.0%) condition: 37.9/41.0 Wh (92.2%) volts: 12.9
min: 11.3 model: Hewlett-Packard PABAS0241231 type: Li-ion serial: <filter>
status: Full
CPU: Info: Quad Core model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP
arch: Tiger Lake family: 6 model-id: 8C (140) stepping: 1 microcode: A4 cache:
L2: 8 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 38707
Speed: 2352 MHz min/max: 400/4200 MHz Core speeds (MHz): 1: 2352 2: 691 3: 1115 4: 938
5: 1021 6: 1024 7: 918 8: 983
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Enhanced IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: SW sequence
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: Hewlett-Packard
driver: i915 v: kernel bus-ID: 0000:00:02.0 chip-ID: 8086:9a49 class-ID: 0300
Device-2: Luxvisions Innotech Limited HP TrueVision HD Camera type: USB
driver: uvcvideo bus-ID: 1-5:2 chip-ID: 30c9:0035 class-ID: fe01 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: xfwm4 v: 4.18.0 driver: loaded: intel
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: eDP1 res: 1366x768 hz: 60 dpi: 102 size: 340x190mm (13.4x7.5")
diag: 389mm (15.3")
OpenGL: renderer: Mesa Intel Xe Graphics (TGL GT2) v: 4.6 Mesa 22.0.5
direct render: Yes
Audio: Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: Hewlett-Packard
driver: sof-audio-pci-intel-tgl alternate: snd_hda_intel,snd_sof_pci_intel_tgl
bus-ID: 0000:00:1f.3 chip-ID: 8086:a0c8 class-ID: 0401
Device-2: Logitech Logitech USB Headset type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-2:4 chip-ID: 046d:0a8f
class-ID: 0300
Sound Server-1: ALSA v: k5.18.0-4mx-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel modules: wl port: 4000
bus-ID: 0000:00:14.3 chip-ID: 8086:a0f0 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 3000 bus-ID: 0000:01:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: down mac: <filter>
Bluetooth: Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 1-10:3 chip-ID: 8087:0026
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
sub-v: 2014 hci-v: 5.2 rev: 2014
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: slave accept
service-classes: rendering, capturing, object transfer, audio
RAID: Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd v: 0.6
port: 4000 bus-ID: 0000:00:0e.0 chip-ID: 8086.9a0b rev: class-ID: 0104
Drives: Local Storage: total: 1.14 TiB used: 119.23 GiB (10.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLQ256HBJD-00BH1
size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4
type: SSD serial: <filter> rev: HPS1NFAV temp: 48.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10SPZX-60Z10T1
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD
rpm: 5400 serial: <filter> rev: 1A05 scheme: GPT
Partition: ID-1: / raw-size: 61 GiB size: 61 GiB (100.00%) used: 15.19 GiB (24.9%) fs: btrfs
dev: /dev/nvme0n1p5 maj-min: 259:5
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 83.4 MiB (32.6%)
fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 300.01 GiB size: 300.01 GiB (100.00%) used: 4.39 GiB (1.5%)
fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 16 GiB used: 422.8 MiB (2.6%) priority: -2
dev: /dev/nvme0n1p4 maj-min: 259:4
Sensors: System Temperatures: cpu: 27.8 C mobo: 10.0 C
Fan Speeds (RPM): cpu: 0 fan-2: 0
Repos: Packages: 2616 note: see --pkg apt: 2605 lib: 1360 flatpak: 11
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/librewolf.list
1: deb [arch=amd64] http://deb.librewolf.net bullseye main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
2: deb http://mxrepo.com/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/onlyoffice.list
1: deb https://download.onlyoffice.com/repo/debian squeeze main
Active apt repos in: /etc/apt/sources.list.d/skype-stable.list
1: deb [arch=amd64] https://repo.skype.com/deb stable main
Active apt repos in: /etc/apt/sources.list.d/vscode.list
1: deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main
Info: Processes: 377 Uptime: 5h 39m wakeups: 10931 Memory: 7.52 GiB used: 5.1 GiB (67.8%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI