Aktualisierung
Posted: Tue Feb 14, 2023 5:21 am
Hallo Zusammen,
eine kurze frage an euch.
Warum wird mir die Aktualisierung von ImageMagick als Programm- und System-Aktualisierung angeboten, obwohl das Programm nicht bei mir installiert ist?
Was ja eine Aktualisierung vorraus setzt.
Gruß
Hier noch schnell die QSI
eine kurze frage an euch.
Warum wird mir die Aktualisierung von ImageMagick als Programm- und System-Aktualisierung angeboten, obwohl das Programm nicht bei mir installiert ist?
Was ja eine Aktualisierung vorraus setzt.
Gruß
Hier noch schnell die QSI
Code: Select all
System: Kernel: 6.0.0-6mx-amd64 [6.0.12-1~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-6.0.0-6mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-21.3_KDE_x64 Wildflower January 15 2023
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: HP product: HP EliteBook 850 G3 v: N/A serial: <filter> Chassis:
type: 10 serial: <filter>
Mobo: HP model: 8079 v: KBC Version 85.77 serial: <filter> UEFI-[Legacy]: HP
v: N75 Ver. 01.25 date: 03/29/2018
Battery: ID-1: BAT0 charge: 0% condition: 24.2/24.2 Wh (100.0%) volts: N/A min: 8.4
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: Not charging
ID-2: hidpp_battery_0 charge: 59% condition: N/A volts: 3.9 min: N/A
model: Logitech G703 LIGHTSPEED Wireless Gaming Mouse w/ HERO type: N/A
serial: <filter> status: Unknown
CPU: Info: Dual Core model: Intel Core i7-6500U bits: 64 type: MT MCP arch: Skylake
family: 6 model-id: 4E (78) stepping: 3 microcode: F0 cache: L2: 4 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 20799
Speed: 500 MHz min/max: 400/3100 MHz Core speeds (MHz): 1: 500 2: 500 3: 500 4: 500
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: retbleed mitigation: IBRS
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: Hewlett-Packard EliteBook 840 G3
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:1916 class-ID: 0300
Device-2: Chicony HP HD Camera type: USB driver: uvcvideo bus-ID: 1-9:5
chip-ID: 04f2:b51d class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: kwin_x11 driver: loaded: modesetting
unloaded: fbdev,vesa display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.0x11.2")
s-diag: 1055mm (41.5")
Monitor-1: eDP-1 res: 1920x1080 hz: 60 dpi: 142 size: 344x193mm (13.5x7.6")
diag: 394mm (15.5")
Monitor-2: DP-1-2 res: 1920x1080 hz: 60 dpi: 94 size: 521x293mm (20.5x11.5")
diag: 598mm (23.5")
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 22.0.5
direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Hewlett-Packard EliteBook 840 G3
driver: snd_hda_intel v: kernel alternate: snd_soc_skl bus-ID: 00:1f.3
chip-ID: 8086:9d70 class-ID: 0403
Sound Server-1: ALSA v: k6.0.0-6mx-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Intel Ethernet I219-V vendor: Hewlett-Packard driver: e1000e v: kernel
port: efa0 bus-ID: 00:1f.6 chip-ID: 8086:1570 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel modules: wl port: efa0
bus-ID: 02:00.0 chip-ID: 8086:24f3 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
bus-ID: 1-7:3 chip-ID: 8087:0a2b class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 100 hci-v: 4.2 rev: 100
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: slave accept
service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 942.7 GiB used: 38.17 GiB (4.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: MZNLN512HCJH-000H1 size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: 2H0Q scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: JMicron Tech model: Generic
size: 465.76 GiB block-size: physical: 4096 B logical: 512 B type: N/A serial: <filter>
rev: 0508 scheme: MBR
Partition: ID-1: / raw-size: 468.93 GiB size: 460.5 GiB (98.20%) used: 38.17 GiB (8.3%) fs: ext4
dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
maj-min: 8:2
Sensors: System Temperatures: cpu: 31.0 C mobo: 0.0 C
Fan Speeds (RPM): N/A
Repos: Packages: note: see --pkg apt: 2402 lib: 1366 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye main non-free
2: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye ahs
Info: Processes: 197 Uptime: 11m wakeups: 6 Memory: 15.52 GiB used: 2.03 GiB (13.1%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: N/A
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: BIOS (legacy, CSM, MBR)