Page 1 of 1
How to enable onboard intel graphics + Nvidia Card?
Posted: Sat Oct 29, 2022 2:21 am
by Hazcrew
On my PC running MX-21.2.1_KDE_x64 Wildflower
I use 2 monitors on my Nvidia quadro K4000 card but also want to use a 3rd monitor on my onboard Intel 4000 card.
The bios is set correctly to use both onboard and graphics card. It works in Windows and my previous Linux Mint install
The grub boots to Monitor-1 then a progress bar appears in
Monitor-3.
As the desktop loads, and I presume the Nvidia drivers take over the signal to Monitor 3 is disabled and the desktop is displayed on
Monitors 1 and 2.
The only display manager seems to be the Nvidia X sever which which doesn't see the Intel device or monitor 3.
I can't seem to find how to enable the Intel driver to use monitor 3.
Any help would be appreciated
Code: Select all
Graphics: Device-1: Intel IvyBridge GT2 [HD Graphics 4000] vendor: ASUSTeK P8 series driver: i915
v: kernel bus-ID: 00:02.0 chip-ID: 8086:0162 class-ID: 0380
Device-2: NVIDIA GK106GL [Quadro K4000] vendor: Hewlett-Packard driver: nvidia
v: 390.154 bus-ID: 02:00.0 chip-ID: 10de:11fa class-ID: 0300
bus-ID: 5-1.4:3 chip-ID: 0c45:636b class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: kwin_x11 driver:
loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa alternate: nv display-ID: :0
screens: 1
Screen-1: 0 s-res: 4240x1440 s-dpi: 99 s-size: 1088x373mm (42.8x14.7")
s-diag: 1150mm (45.3")
Monitor-1: DVI-I-1 res: 1680x1050 hz: 60 dpi: 99 size: 430x270mm (16.9x10.6")
diag: 508mm (20")
Monitor-2: DP-2 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2")
diag: 685mm (27")
Re: How to enable onboard intel graphics + Nvidia Card?
Posted: Sat Oct 29, 2022 3:43 am
by Eadwine Rose
Please post your full quick system info, thanks.
Re: How to enable onboard intel graphics + Nvidia Card?
Posted: Sat Oct 29, 2022 7:09 am
by Hazcrew
Eadwine Rose wrote: Sat Oct 29, 2022 3:43 am
Please post your full quick system info, thanks.
Code: Select all
System: Kernel: 5.10.0-19-amd64 [5.10.149-2] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-19-amd64
root=UUID=<filter> ro quiet splash
Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-21.2.1_KDE_x64 Wildflower April 9 2022 base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASUSTeK model: P8Z77-V LX v: Rev X.0x serial: <filter>
UEFI: American Megatrends v: 2501 date: 07/21/2014
Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M510 serial: <filter>
charge: 55% (should be ignored) rechargeable: yes status: Discharging
Device-2: hidpp_battery_1 model: Logitech K520 serial: <filter>
charge: 70% (should be ignored) rechargeable: yes status: Discharging
CPU: Info: Quad Core model: Intel Core i7-3770K bits: 64 type: MT MCP arch: Ivy Bridge
family: 6 model-id: 3A (58) stepping: 9 microcode: 21 cache: L2: 8 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 56163
Speed: 1610 MHz min/max: 1600/3900 MHz Core speeds (MHz): 1: 1610 2: 1615 3: 1605
4: 1611 5: 1632 6: 1615 7: 1609 8: 1617
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP:
conditional, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Vulnerable: No microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel IvyBridge GT2 [HD Graphics 4000] vendor: ASUSTeK P8 series driver: i915
v: kernel bus-ID: 00:02.0 chip-ID: 8086:0162 class-ID: 0380
Device-2: NVIDIA GK106GL [Quadro K4000] vendor: Hewlett-Packard driver: nvidia
v: 390.154 bus-ID: 02:00.0 chip-ID: 10de:11fa class-ID: 0300
Device-3: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 5-1.4:3 chip-ID: 0c45:636b class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: kwin_x11 driver:
loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa alternate: nv display-ID: :0
screens: 1
Screen-1: 0 s-res: 4240x1440 s-dpi: 99 s-size: 1088x373mm (42.8x14.7")
s-diag: 1150mm (45.3")
Monitor-1: DVI-I-1 res: 1680x1050 hz: 60 dpi: 99 size: 430x270mm (16.9x10.6")
diag: 508mm (20")
Monitor-2: DP-2 res: 2560x1440 hz: 60 dpi: 109 size: 597x336mm (23.5x13.2")
diag: 685mm (27")
OpenGL: renderer: Quadro K4000/PCIe/SSE2 v: 4.6.0 NVIDIA 390.154 direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: ASUSTeK P8Z77-V LX
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
Device-2: NVIDIA GK106 HDMI Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus-ID: 02:00.1 chip-ID: 10de:0e0b class-ID: 0403
Device-3: C-Media USB Advanced Audio Device type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-1.7:4 chip-ID: 0d8c:016c
class-ID: 0300
Device-4: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 5-1.4:3 chip-ID: 0c45:636b class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k5.10.0-19-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK P8P67 and other motherboards driver: r8169 v: kernel port: d000
bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth: Device-1: Integrated System Solution Bluetooth Device type: USB driver: btusb v: 0.8
bus-ID: 3-1.6:3 chip-ID: 1131:1004 class-ID: fe01
Report: hciconfig ID: hci0 rfk-id: 0 state: down bt-service: N/A rfk-block:
hardware: no software: no address: <filter>
Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: slave accept
Drives: Local Storage: total: 1.6 TiB used: 198.11 GiB (12.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO Plus 500GB
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4
type: SSD serial: <filter> rev: 2B2QEXM7 temp: 41.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ01ABF050 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 5400
serial: <filter> rev: 3M scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT512MX100SSD1 size: 476.94 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: MU03 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Crucial model: CT250MX200SSD1 size: 232.89 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: MU05 scheme: GPT
Partition: ID-1: / raw-size: 322.27 GiB size: 316.14 GiB (98.10%) used: 28.89 GiB (9.1%) fs: ext4
dev: /dev/nvme0n1p5 maj-min: 259:5
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 35.3 MiB (36.8%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1
Swap: Alert: No swap data was found.
Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C gpu: nvidia temp: 45 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 30%
Repos: Packages: 2630 note: see --pkg apt: 2624 lib: 1469 flatpak: 6
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
2: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/surfshark.list
1: deb https://ocean.surfshark.com/debian stretch main
Active apt repos in: /etc/apt/sources.list.d/symfony-stable.list
1: deb [signed-by=/usr/share/keyrings/symfony-stable-archive-keyring.gpg] https://dl.cloudsmith.io/public/symfony/stable/deb/debian bullseye main
2: deb-src [signed-by=/usr/share/keyrings/symfony-stable-archive-keyring.gpg] https://dl.cloudsmith.io/public/symfony/stable/deb/debian bullseye main
Info: Processes: 287 Uptime: 1m wakeups: 5 Memory: 23.36 GiB used: 1.93 GiB (8.3%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI