Wireless not found

[tmgfigueiredo]

I everyone. Since my first trial a couple years ago I'm back for another try!

I have bought a new laptop, and here I go again for MX linux dual boot with Windows.
So far looks ok, except that I'm unable to connect wireless. Don't know why, but when I go to network connections, there isn't any wireless connection. Any idea?

Thanks.

[j2mcgreg]

We need your computer’s complete profile before we can diagnose a problem like this so you need to post the output from the QSI utility. The Quick System Info (QSI) utility is located in MX Tools and its output is automatically formatted for use here in the forum. All you have to do after running QSI is click ‘paste’ here in a new post in your thread.

[Huckleberry Finn]

Till you post the QSI: Disable "Fast Startup" in Windows and disable "secure boot" in Bios settings.

[tmgfigueiredo]

The secure boot is already disabled. But didn't disabled the fast Startup.
But since windows isn't booted, how can affect the wireless in MX?

[j2mcgreg]

The secure boot is already disabled. But didn't disabled the fast Startup.
But since windows isn't booted, how can affect the wireless in MX?

Because with Fast Startup enabled, Windows doesn't completely shut down and some services like hard drive access are always on.

[tmgfigueiredo]

I'm at work, and later I will post the QSI output.
Thanks!

[tmgfigueiredo]

I everyone,

Tried to remove the fast Startup, and didn't work.

Here are the specs:

Code: Select all

System:    Kernel: 5.10.0-18-amd64 [5.10.140-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-18-amd64
           root=UUID=<filter> ro quiet splash
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7
           dm: LightDM 1.26.0 Distro: MX-21.2.1_x64 Wildflower September 18  2022
           base: Debian GNU/Linux 11 (bullseye)
Machine:   Type: Laptop System: Micro-Star product: Katana GF76 12UC v: REV:1.0 serial: <filter>
           Chassis: type: 10 serial: <filter>
           Mobo: Micro-Star model: MS-17L4 v: REV:1.0 serial: <filter>
           UEFI: American Megatrends LLC. v: E17L4IMS.10C date: 05/05/2022
Battery:   ID-1: BAT1 charge: 47.3 Wh (93.1%) condition: 50.8/52.0 Wh (97.6%) volts: 12.7
           min: 11.4 model: MSI BIF0_9 type: Li-ion serial: N/A status: Unknown
CPU:       Info: 10-Core model: 12th Gen Intel Core i7-12700H bits: 64 type: MT MCP
           arch: Alder Lake family: 6 model-id: 9A (154) stepping: 3 microcode: 41C cache:
           L2: 24 MiB
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 107520
           Speed: 487 MHz min/max: 400/5900 MHz Core speeds (MHz): 1: 487 2: 472 3: 410 4: 464
           5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 13: 427 14: 501 15: 440
           16: 500 17: 432 18: 501 19: 497 20: 495
           Vulnerabilities: Type: itlb_multihit status: Not affected
           Type: l1tf status: Not affected
           Type: mds status: Not affected
           Type: meltdown status: Not affected
           Type: mmio_stale_data status: Not affected
           Type: retbleed status: Not affected
           Type: spec_store_bypass
           mitigation: Speculative Store Bypass disabled via prctl and seccomp
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
           Type: spectre_v2
           mitigation: Enhanced IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: SW sequence
           Type: srbds status: Not affected
           Type: tsx_async_abort status: Not affected
Graphics:  Device-1: Intel Alder Lake-P Integrated Graphics vendor: Micro-Star MSI driver: N/A
           bus-ID: 00:02.0 chip-ID: 8086:46a6 class-ID: 0300
           Device-2: NVIDIA GA107M [GeForce RTX 3050 Mobile] vendor: Micro-Star MSI driver: N/A
           alternate: nouveau bus-ID: 01:00.0 chip-ID: 10de:25a2 class-ID: 0302
           Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: loaded: vesa
           unloaded: fbdev,modesetting display-ID: :0.0 screens: 1
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3")
           s-diag: 583mm (23")
           Monitor-1: default res: 1920x1080 hz: 77
           OpenGL: renderer: llvmpipe (LLVM 11.0.1 256 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1
           direct render: Yes
Audio:     Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Micro-Star MSI
           driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:51c8 class-ID: 0401
           Sound Server-1: ALSA v: k5.10.0-18-amd64 running: yes
           Sound Server-2: PulseAudio v: 14.2 running: yes
Network:   Device-1: Intel Alder Lake-P PCH CNVi WiFi driver: N/A modules: wl port: 5000
           bus-ID: 00:14.3 chip-ID: 8086:51f0 class-ID: 0280
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI
           driver: r8169 v: kernel port: 3000 bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
           IF: eth0 state: down mac: <filter>
Drives:    Local Storage: total: 953.87 GiB used: 5.68 GiB (0.6%)
           SMART Message: Unable to run smartctl. Root privileges required.
           ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Micron model: 2450 MTFDKBA1T0TFK
           size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4
           type: SSD serial: <filter> rev: V5MA010 temp: 31.9 C scheme: GPT
Partition: ID-1: / raw-size: 97.7 GiB size: 95.61 GiB (97.86%) used: 5.65 GiB (5.9%) fs: ext4
           dev: /dev/nvme0n1p7 maj-min: 259:7
           ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 27.6 MiB (28.7%) fs: vfat
           dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:      Alert: No swap data was found.
Sensors:   System Temperatures: cpu: 55.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Repos:     Packages: note: see --pkg apt: 1952 lib: 979 flatpak: 0
           No active apt repos in: /etc/apt/sources.list
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list
           1: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bullseye main non-free
Info:      Processes: 327 Uptime: 2m wakeups: 36 Memory: 15.34 GiB used: 1009.5 MiB (6.4%)
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: N/A
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI

[Huckleberry Finn]

You can install 5.19 kernel from "MX Package Installer" - "Popular Apps" tab with 2 clicks, reboot and try.

(That one already requires 5.14 + kernels)


It may also help this:

Graphics: Device-1: Intel Alder Lake-P Integrated Graphics vendor: Micro-Star MSI driver: N/A
bus-ID: 00:02.0 chip-ID: 8086:46a6 class-ID: 0300
Device-2: NVIDIA GA107M [GeForce RTX 3050 Mobile] vendor: Micro-Star MSI driver: N/A
alternate: nouveau bus-ID: 01:00.0 chip-ID: 10de:25a2 class-ID: 0302
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: loaded: vesa
unloaded: fbdev,modesetting display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3")
s-diag: 583mm (23")
Monitor-1: default res: 1920x1080 hz: 77
OpenGL: renderer: llvmpipe (LLVM 11.0.1 256 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1
direct render: Yes


If you like, you can try AHS release, or turn this one into AHS. But in all cases install that most recent kernel (at least till 6.0 is there).

Though your question was not about graphics: You don't have nomodeset etc. in your boot parameters to cause that "vesa", so, an xorg.conf may be causing that:

Code: Select all

sudo rm /etc/X11/xorg.conf

Reboot.

[Stevo]

12th gen Intel hardware requires the AHS packages and a newer kernel. No doubt about it.

AHS should be the default ISO for new laptops like the OP mentioned buying. If they want to download and test it in a live Session, everything should work out of the box. They could reinstall AHS and save their home folder, or just add the ahs section of our repo, upgrade everything that's upgradeable, then add a newer 5.18/5.19 kernel and install "linux-firmware" to match the newer kernel (which will remove a lot of older firmware packages, don't worry, that's by design).

That also seems to be an Optimus laptop, so they should read up on how to use PRIME GPU switching in MX 21 after using the MX Nvidia Installer after updating to AHS. Like so, with this Dell:

Code: Select all

nvidia-run-mx inxi -G

Graphics:  Device-1: NVIDIA GA107M [GeForce RTX 3050 Ti Mobile] driver: nvidia v: 510.85.02 
           Device-2: AMD Cezanne driver: amdgpu v: kernel 
           Device-3: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo 
           Display: x11 server: X.Org 1.20.14 driver: loaded: amdgpu resolution: 1920x1080~120Hz 
           OpenGL: renderer: NVIDIA GeForce RTX 3050 Ti Laptop GPU/PCIe/SSE2 v: 4.6.0 NVIDIA 510.85.02 

I am rebuilding the Sid 6.0.2 kernel for MX 21 right now, BTW.

So far, so good.

[tmgfigueiredo]

Thanks folks! It worked!