MX Linux Forum

Support for MX and antiX Linux distros
https://www.forum.mxlinux.org/

Problem with applications starting automatically

https://www.forum.mxlinux.org/viewtopic.php?t=71030

Page 1 of 1

Problem with applications starting automatically

Posted: Mon Jul 18, 2022 8:51 am
by kohlhaas
I have a problem with applications starting automatically:
For example, "Clementine" is active after system startup.
But when I call ""session and startup", there is no entry for Clementine there.
Are there other places in the system where I can find and disable this autostart?

Code: Select all

System:    Kernel: 5.10.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-16-amd64 root=UUID=<filter> ro quiet splash 
           init=lib/systemd/systemd 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7 dm: LightDM 1.26.0 
           Distro: MX-21.1_x64 Wildflower October 20  2021 base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Mini-pc System: Intel Client Systems product: NUC11PAKi5 v: M15551-302 serial: <filter> 
           Chassis: Intel Corporation type: 35 v: 2.0 serial: <filter> 
           Mobo: Intel model: NUC11PABi5 v: K90634-302 serial: <filter> UEFI: Intel v: PATGL357.6042.2022.0223.1655 
           date: 02/23/2022 
CPU:       Info: Quad Core model: 11th Gen Intel Core i5-1135G7 bits: 64 type: MT MCP arch: Tiger Lake family: 6 
           model-id: 8C (140) stepping: 1 microcode: A4 cache: L2: 8 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 38707 
           Speed: 941 MHz min/max: 400/4200 MHz Core speeds (MHz): 1: 941 2: 984 3: 1075 4: 977 5: 1065 6: 1074 7: 1067 
           8: 1025 
           Vulnerabilities: Type: itlb_multihit status: Not affected 
           Type: l1tf status: Not affected 
           Type: mds status: Not affected 
           Type: meltdown status: Not affected 
           Type: mmio_stale_data status: Not affected 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:9a49 
           class-ID: 0300 
           Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: loaded: modesetting unloaded: fbdev,vesa 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1536x960 s-dpi: 96 s-size: 406x254mm (16.0x10.0") s-diag: 479mm (18.9") 
           Monitor-1: DP-1 res: 1536x960 hz: 60 dpi: 75 size: 518x324mm (20.4x12.8") diag: 611mm (24.1") 
           OpenGL: renderer: Mesa Intel Xe Graphics (TGL GT2) v: 4.6 Mesa 20.3.5 direct render: Yes 
Audio:     Device-1: Intel Tiger Lake-LP Smart Sound Audio driver: snd_hda_intel v: kernel alternate: snd_sof_pci 
           bus-ID: 00:1f.3 chip-ID: 8086:a0c8 class-ID: 0403 
           Device-2: Dell DELL Slim Soundbar SB521A type: USB driver: snd-usb-audio bus-ID: 3-6.3:5 chip-ID: 413c:a510 
           class-ID: 0102 serial: <filter> 
           Sound Server-1: ALSA v: k5.10.0-16-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: Intel Wi-Fi 6 AX201 driver: iwlwifi v: kernel modules: wl port: 3000 bus-ID: 00:14.3 chip-ID: 8086:a0f0 
           class-ID: 0280 
           IF: wlan0 state: up mac: <filter> 
           Device-2: Intel Ethernet I225-V driver: igc v: kernel port: efa0 bus-ID: 59:00.0 chip-ID: 8086:15f3 class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
           Device-3: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus-ID: 2-1.2:6 chip-ID: 0bda:8153 
           class-ID: 0000 serial: <filter> 
           IF: eth1 state: down mac: <filter> 
Bluetooth: Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 3-10:4 chip-ID: 8087:0026 class-ID: e001 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2 sub-v: 24bf hci-v: 5.2 
           rev: 24bf 
           Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: slave accept 
           service-classes: rendering, capturing, object transfer, audio 
Drives:    Local Storage: total: 1.82 TiB used: 79.95 GiB (4.3%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: WDS100T1X0E-00AFY0 size: 931.51 GiB block-size: 
           physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter> rev: 614900WD temp: 31.9 C 
           scheme: GPT 
           ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Western Digital model: WDS100T2B0B-00YS70 size: 931.51 GiB 
           block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> scheme: GPT 
Partition: ID-1: / raw-size: 97.78 GiB size: 95.69 GiB (97.86%) used: 17.89 GiB (18.7%) fs: ext4 dev: /dev/sda2 maj-min: 8:2 
           ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 
           ID-3: /home raw-size: 485.08 GiB size: 476.4 GiB (98.21%) used: 62.05 GiB (13.0%) fs: ext4 dev: /dev/sda4 
           maj-min: 8:4 
Swap:      Alert: No swap data was found. 
Sensors:   System Temperatures: cpu: 34.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: 2670 note: see --pkg apt: 2653 lib: 1456 flatpak: 9 snap: 8 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
           No active apt repos in: /etc/apt/sources.list.d/gezakovacs-ubuntu-ppa-kinetic.list 
           Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 
           1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
           No active apt repos in: /etc/apt/sources.list.d/morphis-ubuntu-anbox-support-kinetic.list 
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bullseye main non-free
           Active apt repos in: /etc/apt/sources.list.d/opera-stable.list 
           1: deb https://deb.opera.com/opera-stable/ stable non-free
           No active apt repos in: /etc/apt/sources.list.d/sicklylife-ubuntu-filezilla-kinetic.list 
           Active apt repos in: /etc/apt/sources.list.d/teamviewer.list 
           1: deb http://linux.teamviewer.com/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/vivaldi.list 
           1: deb [arch=amd64] https://repo.vivaldi.com/stable/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/yann1ck-ubuntu-onedrive-kinetic.list 
           1: deb http://ppa.launchpad.net/yann1ck/onedrive/ubuntu/ kinetic main
Info:      Processes: 404 Uptime: 23m wakeups: 22 Memory: 30.92 GiB used: 4.74 GiB (15.3%) Init: systemd v: 247 runlevel: 5 
           default: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 
           running-in: quick-system-info-mx inxi: 3.3.06 
Boot Mode: UEFI

Re: Problem with applications starting automatically

Posted: Mon Jul 18, 2022 9:02 am
by dolphin_oracle
Xfce has a "saved sessions" feature that will start applications that were running at shutdown. YOu can try clearing the saved sessions.

Re: Problem with applications starting automatically

Posted: Mon Jul 18, 2022 9:06 am
by kohlhaas
Thank you, but unfortunately THAT does not help.
Of course I had finished "Clementine" before the last shutdown ...

Re: Problem with applications starting automatically

Posted: Mon Jul 18, 2022 9:11 am
by Adrian
Is it by chance present in ~/.config/autostart? Otherwise I don't see how it would start, either from saved sessions or from that folder.

Re: Problem with applications starting automatically

Posted: Mon Jul 18, 2022 10:27 am
by Huckleberry Finn
kohlhaas wrote: Mon Jul 18, 2022 9:06 am Thank you, but unfortunately THAT does not help...
Let's make it sure (and step by step)
  • Close all unwanted apps , then "Session and Startup" - "General" tab, uncheck "Automatically save session on logout"
Reboot.

P.S. Just a normal (user) terminal, no root, no sudo etc..
If still not: do the reverse: When all are closed, check that to save the session, reboot, then uncheck again, leave so..

Re: Problem with applications starting automatically

Posted: Mon Jul 18, 2022 11:41 am
by kohlhaas
Have now found the cause:
Since I shut down my system with a script, unfortunately this session (in which "Clementine" was not running) was NOT automatically backed up. Instead, the last saved session was a very old one in which "Clementine" was running.
Sorry, that was my mistake. :mad:

Re: Problem with applications starting automatically

Posted: Mon Jul 18, 2022 12:11 pm
by Huckleberry Finn
Then, you can mark the thread, like this:
All times are UTC-04:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited