Brand new MXFluxbox install - Wallpaper questions
Posted: Mon Mar 28, 2022 8:54 am
This morning I did a nuke & pave on my MX FLuxbox in order to start over. Since it was previously installed over the top of AV Linux. Figured this would be the best way to get back to the basics and learn Fluxbox from the ground up. I've got questions about the wallpaper handler Nitrogen.
1.) It lets me add new directories just fine but will not display those directories. Is there a way to do a force refresh of the wallpapers that are displayed in Nitrogen?
2.) Other times I've Nitrogen (other desktops/window mangers) it allows me to set different wallpapers for different monitors. But with MX Fluxbox it is only 1 that spans both monitors. Is this a fluxbox thing itself or is it a setting specific to MX version of fluxbox?
1.) It lets me add new directories just fine but will not display those directories. Is there a way to do a force refresh of the wallpapers that are displayed in Nitrogen?
2.) Other times I've Nitrogen (other desktops/window mangers) it allows me to set different wallpapers for different monitors. But with MX Fluxbox it is only 1 that spans both monitors. Is this a fluxbox thing itself or is it a setting specific to MX version of fluxbox?
Code: Select all
System: Kernel: 5.16.0-5mx-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.16.0-5mx-amd64
root=UUID=<filter> ro quiet splash
Desktop: Fluxbox 1.3.7 info: tint2 vt: 7 dm: LightDM 1.26.0
Distro: MX-21_fluxbox_x64 Wildflower Oct 20 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: ASRock model: X370 Killer SLI/ac serial: <filter>
UEFI-[Legacy]: American Megatrends v: P5.80 date: 12/25/2019
Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard serial: <filter>
charge: 50% (should be ignored) rechargeable: yes status: N/A
CPU: Info: 6-Core model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2
family: 17 (23) model-id: 71 (113) stepping: 0 microcode: 8701013 cache: L2: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 86235
Speed: 2194 MHz min/max: 2200/3600 MHz boost: enabled Core speeds (MHz): 1: 2194
2: 2194 3: 2792 4: 1863 5: 2193 6: 2120 7: 2194 8: 2195 9: 2194 10: 2199 11: 2195
12: 2189
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, IBPB: conditional, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Baffin [Radeon RX 550 640SP / RX 560/560X] vendor: Gigabyte
driver: amdgpu v: kernel bus-ID: 0b:00.0 chip-ID: 1002:67ff class-ID: 0300
Device-2: Generalplus USB WEBCAM type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-5:2 chip-ID: 1b3f:1167 class-ID: 0102
Display: x11 server: X.Org 1.20.11 driver: loaded: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3520x1080 s-dpi: 96 s-size: 931x285mm (36.7x11.2")
s-diag: 974mm (38.3")
Monitor-1: DisplayPort-0 res: 1600x900 hz: 60 dpi: 92 size: 443x249mm (17.4x9.8")
diag: 508mm (20")
Monitor-2: HDMI-A-0 res: 1920x1080 hz: 60 dpi: 92 size: 531x298mm (20.9x11.7")
diag: 609mm (24")
OpenGL:
renderer: Radeon RX 560 Series (POLARIS11 DRM 3.44.0 5.16.0-5mx-amd64 LLVM 11.0.1)
v: 4.6 Mesa 20.3.5 direct render: Yes
Audio: Device-1: AMD Baffin HDMI/DP Audio [Radeon RX 550 640SP / RX 560/560X]
vendor: Gigabyte driver: snd_hda_intel v: kernel bus-ID: 0b:00.1 chip-ID: 1002:aae0
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASRock driver: snd_hda_intel
v: kernel bus-ID: 0d:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Generalplus USB WEBCAM type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-5:2 chip-ID: 1b3f:1167 class-ID: 0102
Device-4: ZOOM R16 type: USB driver: snd-usb-audio bus-ID: 3-1:2 chip-ID: 1686:00dd
class-ID: ff00
Device-5: AKAI Professional M.I. LPK25 MIDI Keyboard type: USB driver: snd-usb-audio
bus-ID: 3-4:4 chip-ID: 09e8:0076 class-ID: 0103
Sound Server-1: ALSA v: k5.16.0-5mx-amd64 running: yes
Sound Server-2: JACK v: 1.9.17 running: no
Sound Server-3: PulseAudio v: 14.2 running: yes
Network: Device-1: Intel Dual Band Wireless-AC 3168NGW [Stone Peak] driver: iwlwifi v: kernel
modules: wl bus-ID: 04:00.0 chip-ID: 8086:24fb class-ID: 0280
IF: wlan0 state: down mac: <filter>
Device-2: Intel I211 Gigabit Network vendor: ASRock driver: igb v: kernel port: f000
bus-ID: 05:00.0 chip-ID: 8086:1539 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth: Device-1: Intel Wireless-AC 3168 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 1-9:3 chip-ID: 8087:0aa7 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 1100 hci-v: 4.2 rev: 1100
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff
link-mode: slave accept
Drives: Local Storage: total: 931.52 GiB used: 11.24 GiB (1.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:1 vendor: Crucial model: CT500P5SSD8 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: P4CR324 temp: 32.9 C scheme: MBR
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Crucial model: CT500P5SSD8 size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD
serial: <filter> rev: P4CR324 temp: 25.9 C scheme: MBR
Partition: ID-1: / raw-size: 457.75 GiB size: 449.5 GiB (98.20%) used: 11.24 GiB (2.5%) fs: ext4
dev: /dev/nvme0n1p1 maj-min: 259:3
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p2 maj-min: 259:4
Sensors: Message: No sensor data found. Is lm-sensors configured?
Repos: Packages: 1912 note: see --pkg apt: 1908 lib: 920 flatpak: 4
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/atom.list
1: deb [arch=amd64] https://packagecloud.io/AtomEditor/atom/any/ any main
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ bullseye main non-free
Active apt repos in: /etc/apt/sources.list.d/onlyoffice.list
1: deb https://download.onlyoffice.com/repo/debian squeeze main
Info: Processes: 321 Uptime: 28m wakeups: 6 Memory: 15.56 GiB used: 1.53 GiB (9.8%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Shell: Bash v: 5.1.4 running-in: quick-system-info-mx
inxi: 3.3.06
Boot Mode: BIOS (legacy, CSM, MBR)
