getting idesk second command to work

Message

#1 Post by **Jerry3904** » Tue Mar 10, 2020 8:41 am

Ever since the beginning I have been trying to figure out how to get the second command to work that one sees in the ideskrc file and all the documentation. After futzing around for a long time, I seem to have established one fact: only the left mouse click is functional.

Check out this thunar.lnk

Code: Select all

table Icon
  Caption: 
  Icon: /usr/share/icons/Moka/48x48/apps/thunar.png
  X: 100
  Y: 360
  Command[0]: thunar
  Command[1]: mx-idesktool
end

It will will work if I set the second command up like this in the ~/.ideskrc file

Code: Select all

 Execute[0]: left singleClk  << this is how we have it
 Execute[1]: control left singleClk

Problem remains: clicking for Execute[1] raises both mx-idesktool and thunar = Execute[0]. Still, that's a major step forward. The goal is to have left single click bring up thunar, control left single click (or something else) mx-idesktool only. I will continue to fool around trying other options, wanting to believe that some combination might actually work correctly--and maybe others can jump in.

#2 Post by **Jerry3904** » Tue Mar 10, 2020 8:55 am

This works as I would like!

Code: Select all

table Actions
  Lock: control right doubleClk
  Reload: control middle singleClk
  Drag: right hold
  EndDrag: right singleClk
  Execute[0]: left singleClk
  Execute[1]: middle singleClk
end

Note that I have used the original Reload command, since I saw that it was working. Then I changed the Reload by adding "control" -- and that still works.

That's better, but I find clicking with the middle button (which is not found on all mouses) sort of awkward. Will return to this later...

#3 Post by **Jerry3904** » Tue Mar 10, 2020 9:12 am

Final: everything works with this, no conflicts.

Code: Select all

table Actions
  Lock: control right doubleClk
  Reload: control left singleClk
  Drag: right hold
  EndDrag: right singleClk
  Execute[0]: left singleClk
  Execute[1]: middle singleClk
end

Time to get to real work...

#4 Post by **spidermouse** » Tue Mar 10, 2020 10:32 am

Perhaps this one?

Code: Select all

table Actions
  Lock: control right doubleClk
  Reload: middle doubleClk
  Drag: left hold
  EndDrag: left singleClk
  Execute[0]: left doubleClk
  Execute[1]: right singleClk
end

Triple click is also possible. :) tripleClk
idesk 0.7.5 has some nice options.
It can rotate backgrounds from a folder if Background folder is set and Background.Delay is set to something other than 0.
All the options are listed here ===> http://idesk.sourceforge.net/html/usage.html

#5 Post by **Jerry3904** » Tue Mar 10, 2020 10:40 am

Thanks. Nice tip on the background rotation, I'll take a look.

BTW: is there any way to get the XY part I was working on to be functional?

#6 Post by **spidermouse** » Tue Mar 10, 2020 12:02 pm

Jerry3904 wrote: Tue Mar 10, 2020 10:40 am BTW: is there any way to get the XY part I was working on to be functional?

Totally forgot about that.
This should do it:

Code: Select all

#! /bin/bash

#mx-idesktool v1.0, released January 2020. 
#A script by the MX Linux Dev Team, user spidermouse and others to configure the idesk app. Based on mx-mx-idesktool v1.36 released August 2004 by John Murray john@jmurray.id.au

TEXTDOMAINDIR=/usr/share/locale
export TEXTDOMAIN="mx-fluxbox"

TEXT1=$"ERROR: Yad not installed or not in path."
TEXT2=$"Yad found. So far so good.."
TEXT3=$"ERROR: idesk not installed or not in path. Try http://sourceforge.net/projects/idesk/"
TEXT4=$"idesk found - we're on a roll :)"
TEXT5=$"Icon Management Tool"
TEXT6=$"Icon Caption:\n(Leave blank for no caption)"
TEXT7=$"Back"
TEXT8=$"Cancel"
TEXT9=$"Next"
TEXT10=$"Caption"
TEXT11=$"NOTE: The default right-click command \n
   runs this configuration tool (recommended)."
TEXT12=$"Left-Click Command:"
TEXT13=$"Right-Click Command:"
TEXT14=$"Current icon" 
TEXT15=$"Oops!"
TEXT16=$"Error: Icon Image File Not Found."
TEXT17=$"Quit"
TEXT18=$"Error: Unknown Filetype. The icon should be a png image."
TEXT19=$"Please choose a file"
TEXT20=$"Error: You need to select a valid file"
TEXT21=$"Finished!" 
TEXT22=$"All done. Restarting idesk now..."
TEXT23=$"Choose a .png icon image"
TEXT24=$"View or Edit an Icon"
TEXT25=$"Remove an Icon"
TEXT26=$"Add a New Icon"
TEXT27=$"Reload the Desktop"
TEXT28=$"Edit iDesk's config file"
TEXT29=$"MX-idesktool Help"
TEXT30=$"USE: double-click entry to select a management action"
TEXT31=$"iDesk Configuration"
TEXT32=$"Config. file  found - excellent!"
TEXT33=$"WARNING: No ideskrc file was found.\nWould you like to have this file\nadded now?"
TEXT34=$"No!"
TEXT35=$"Yes!"
TEXT36=$"\tThe configuration file has been written. \n
                Drag any icons you create to the
                desired locations and they will
                be remembered between sessions \n\n 
                Would you like to run the icon wizard now?"
#TEXT37=$"Properties"
#TEXT38=$"Delete"
#TEXT39=$"New"
#TEXT40=$"Refresh"
#TEXT41=$"Configure"
#CAS=$"Help"
PROPERTIES=$"Properties"
DELETE=$"Delete"
NEW=$"New"
POSITION=$"Position"
REFRESH=$"Refresh"
CONFIGURE=$"Configure"
HELP=$"Help"
TEXT43=$"ACTION"
TEXT44=$"DESCRIPTION"
TEXT45=$"Choose a .png icon image"
TEXT46=$"Left-Click Command:"
TEXT47=$"Right-Click Command"
TEXT48=$"Set a presise position for an icon"
LOCK_TOGGLE=$"Lock-unlock"
LOCK_TOGGLE_TEXT=$"Permit/prevent icon movement"

#First make sure yad is available
if ! hash yad > /dev/null ; then
    echo "$TEXT1"
    exit
else
    echo "$TEXT2"
fi


#make sure idesk is available
if ! hash idesk > /dev/null ; then
    echo "$TEXT3"
    exit
else
	echo "$TEXT4" "$TEXT45"
fi

#make sure the .idesktop folder exists and if not make it now, so idesk can start
mkdir -p ~/.idesktop

#find out whether an argument was used

if [ "$#" -ne 1 ]; then
        argy=nope
else
        argy=yup
fi

argu="${1}"

#set this icon directory because it has most available
icondir=/usr/share/icons/Moka/48x48/apps/

DIALOG=yad

###############################################
############Declare some Functions#############
writeconf()
{
echo -e "table Config
  FontName: arial
  FontSize: 12
  FontColor: #ffffff
  Locked: false
  Transparency: 0
  Shadow: true
  ShadowColor: #000000
  ShadowX: 1
  ShadowY: 2
  Bold: false
  ClickDelay: 200
  IconSnap: false
  SnapWidth: 55
  SnapHeight: 100
  SnapOrigin: BottomRight
  SnapShadow: true
  SnapShadowTrans: 200
  CaptionOnHover: true
  CaptionPlacement: bottom
end
table Actions
  Lock: control right doubleClk
  Reload: middle doubleClk
  Drag: right hold
  EndDrag: right singleClk
  Execute[0]: left singleClk
  Execute[1]: left doubleClk
end" > "${HOME}/.ideskrc"
}
################################################
################################################
newcaption()
{
new_caption="$($DIALOG --title "$TEXT5" \
                       --form --center --text="$TEXT6" \
                       --separator="" \
                       --button="$TEXT7":3 \
                       --button="$TEXT8":1 \
                       --button="$TEXT9":0 \
		       --field="$TEXT10" "$cap" 2>/dev/null)"
retval=$?

case $retval in
        0) cap="${new_caption}"
           caption="$(echo "${new_caption}" | sed 's/\$/\\$/g')"
	   ;;
        3) if [ "$firstwindow" = "argynope" ]; then
                argynope
           else
                argyyep
           fi
	   ;;
        *) argynope
           ;;
esac

newcommands
}

##########################################################
##########################################################

newcommands()

{

#We replace troublesome characters with underscores so as to avoid problems writing the file
modcaption="$(echo "${caption}" | sed "s/[\ \$\/\*\&\|\?\^\"\']/_/g")"

#if the icon has no caption (ie. empty string) we need to make a unique filename for it,
#otherwise we just use the caption for the filename

if [ "${modcaption}" = "" ]; then
        modcaption="NoCaption$$"
fi


#new_commands="$($DIALOG --form --separator="\n" --title "$TEXT5" \
                        #--text="$TEXT11"\
                        #--button="$TEXT7":3 --button="$TEXT8":1 --button="$TEXT9":0 \
	                #--field="$TEXT46": "$command" \
                        #--field="$TEXT47": "mx-idesktool ${modcaption}.lnk" )"
                        
new_commands="$($DIALOG --form --center --separator="\n" --title "$TEXT5" \
        --button="$TEXT7":3 --button="$TEXT8":1 --button="$TEXT9":0 \
        --field="$TEXT46": "$command")"
        
retval=$?

case $retval in
        0) command="$(echo "${new_commands}" | sed -n "1p")"
	   #rightclick="$(echo "${new_commands}"  | sed -n "2p")"
           geticon
           ;;
        3) newcaption
           ;;
        *) argynope
	;;
esac

}

###########################################################
###########################################################

getcurrentvalues()

{
echo "getting current values"
#get the caption
	currentcaption=`cat $currentlnkfile | grep "Caption:" | sed "s/Caption://" | sed "s/^[ \t]*//"`
#get the icon
	currenticon=`cat $currentlnkfile | grep "Icon:" | sed "s/Icon:\ //" | sed "s/^[ \t]*//"`
#get the left click command
	command=`cat $currentlnkfile | grep "Command\[0\]:" | sed "s/Command\[0\]:\ //" | sed "s/^[ \t]*//"`
#get the right click command
#	currentrightclick=`cat $currentlnkfile | grep "Command\[1\]:" | sed "s/Command\[1\]:\ //" | sed "s/^[ \t]*//"`
#get the X value
	currentxvalue=`cat $currentlnkfile | grep "X:" | sed "s/X://" | sed "s/^[ \t]*//"`
#get the Y value
	currentyvalue=`cat $currentlnkfile | grep "Y:" | sed "s/Y://" | sed "s/^[ \t]*//"`

echo "got current values"
modifycaption

}

#################################################################
#################################################################

modifycaption()
{

inputbox="$($DIALOG --title "$TEXT5" \
                    --form --center --text="$TEXT10" --separator="" \
                    --button="$TEXT7":3 --button="$TEXT8":1 --button="$TEXT9":0 \
                    --field="$TEXT10" "$currentcaption" )"
retval=$?

case $retval in
     0) cap="${inputbox}"
	caption="$(echo "${inputbox}" | sed 's/\$/\\$/g')"
	;;
     3) if [ "$firstwindow" = "argyyep" ]; then
                argyyep
        else
                getlnkfile
	fi
        ;;
     *) argynope
        ;;
esac

modifycommands

}

##############################################################
##############################################################

modifycommands()

{

comefrom=modif

#We replace troublesome characters with underscores using sed here, so as to avoid problems writing the file
modcaption=`echo $caption | sed "s/[\ \$\/\*\&\|\?\^\"\']/_/g"`

#if the icon has no caption (ie. empty string) we need to make a unique filename for it,
#otherwise we just use the caption for the filename
if [ "$modcaption" = "" ]; then
   modcaption="NoCaption$$"
fi


#mod_commands="$($DIALOG --form --separator="\n" --title "$TEXT5" \
                    #--text="$TEXT11" \
                        #--button="$TEXT7":3 --button="$TEXT8":1 --button="$TEXT9":0 \
	                #--field="$TEXT12" "$command" \
                        #--field="$TEXT13" "mx-idesktool $modcaption.lnk")"

mod_commands="$($DIALOG --form --center --separator="\n" --title "$TEXT5" \
                        --button="$TEXT7":3 --button="$TEXT8":1 --button="$TEXT9":0 \
	                --field="$TEXT12" "$command")"
                        
retval=$?

case $retval in
        0) command="$(echo "${mod_commands}" | sed -n "1p")"
	   #rightclick="$(echo "${mod_commands}"  | sed -n "2p")"
           geticon
           ;;
        3) currentcaption="${cap}"
           modifycaption
           ;;
        *) argynope
	;;
esac

}

###########################################################
###########################################################

geticon()
{
if [ "$comefrom" = "modif" ]; then
        iconplaceholder="${currenticon}"
else
        iconplaceholder="${icondir}"
fi

cd "${iconplaceholder%/*}"

icon="$($DIALOG --width=500 --height=500 --center \
                --button="$TEXT7":3 --button="$TEXT8":1 \
                --button="$TEXT9":0 --title "$TEXT23" \
                --text="$TEXT14": \
                --file-selection "${iconplaceholder}" \
                --file-filter="png | *.png *.PNG" \
                --filename="${iconplaceholder}" 
       )"

retval=$?

icon="$(echo "${icon}"  | cut -d '|' -f 2)"

case ${retval} in
        0) iconvalidate
           ;;
        3) if [ "${comefrom}" = "modif" ]; then
                   modifycommands
	   else
                   newcommands
           fi
           ;;
        *) argynope
           ;;
esac
}

###########################################################
###########################################################

iconvalidate()
{
if [ -e "${icon}" ]; then
        iconexists=yep
else
        $DIALOG --title="$TEXT15"  \
                --center \
                --icon "./warning.xpm" \
                --text="$TEXT16" \
                --button="$TEXT17":1 \
                --button="$TEXT7":0
        case $? in
                0) geticon
                   ;;
                *) argynope
                   ;;
        esac
fi

iconcheck="$(echo "${icon}" | grep -i "\.png")"

if [ "${iconcheck}" = "$icon" ]; then
        writefile
else
        $DIALOG --title= \
                --icon ./warning.xpm \
                --text="$TEXT18" \
                --center
        case $? in
                0) geticon
                   ;;
                *) argynope
                   ;;
        esac
fi

}

###########################################################

deleteandrefresh()
{
rm -f "${currentlnkfile}"
killall idesk
exec idesk &
argynope
}

#############################################################
#############################################################

getlnkfile()
{

cd "${HOME}/.idesktop"
currentlnkfile="$($DIALOG --width 500 --height 500 --center \
                          --button="$TEXT7":3 --button="$TEXT8":1 --button="$TEXT9":0 \
                          --title="$TEXT19"  \
                          --file-selection --file-filter="lnk | *.lnk")"
retval=$?

case $retval in
        0) fileselectedyet=yes
           filecheck="$(echo "${currentlnkfile}" | grep -i "\.lnk")"
           if [ "${filecheck}" = "${currentlnkfile}" ] && [ -e "${currentlnkfile}" ]; then
                  if [ "${choice}" = "Properties" ]; then
                          getcurrentvalues
                  else
                          deleteandrefresh
                  fi
           else
                  $DIALOG --title=$TEXT15 \
                          --icon ./warning.xpm \
                          --text=$TEXT20 \
                          --center
                  case $? in
                       0) fileselectedyet=no
                          getlnkfile
                          ;;
                       *) argynope
                          ;;
                  esac
           fi
           ;;
        3) argynope
           ;;
        *) argynope
           ;;
esac

}

##############################################################
##############################################################

refresh()
{
killall idesk
exec idesk &
argynope
}

##############################################################
##############################################################

modifyXY()

{
#get the X value
	currentxvalue="$(cat "${currentlnkfile}" | grep "X:" | sed "s/X://" | sed "s/^[ \t]*//")"
#get the Y value
	currentyvalue="$(cat "${currentlnkfile}" | grep "Y:" | sed "s/Y://" | sed "s/^[ \t]*//")"


inputbox="$($DIALOG --title="$TEXT48" \
                    --form --text="$TEXT48" --separator=" " \
                    --button="$TEXT7":3 --button="$TEXT8":1 --button="Set":0 \
                    --field="X":NUM "${currentxvalue}" \
                    --field="Y":NUM "${currentyvalue}" )"
retval=$?

case $retval in
     0) cap="${inputbox}"
	X="$(echo "${inputbox}" | cut -d' ' -f1 | sed 's/\$/\\$/g')"
	Y="$(echo "${inputbox}" | cut -d' ' -f2 | sed 's/\$/\\$/g')"
        sed -i 's/^[[:space:]]\+X\:[[:space:]]\+[0-9]\+/  X\: '"${X}"'/g' "${currentlnkfile}"
        sed -i 's/^[[:space:]]\+Y\:[[:space:]]\+[0-9]\+/  Y\: '"${Y}"'/g' ${currentlnkfile} "${currentlnkfile}"
        refresh
	;;
     3) if [ "$firstwindow" = "argyyep" ]; then
                argyyep
        else
                getlnkfile
	fi
        ;;
     *) argynope
        ;;
esac


modifyXY

}

###################################################################
###################################################################

writefile()
{

if [ "${choice}" = "Properties" ]; then
        rm -f "${currentlnkfile}"
else
        currentxvalue=400
        currentyvalue=500
fi

touch "${HOME}/.idesktop/${modcaption}.lnk"
echo "table Icon" > "${HOME}/.idesktop/${modcaption}.lnk"
echo "  Caption: ${caption}" | sed 's/.\$/\$/g' >> "${HOME}/.idesktop/${modcaption}.lnk"
echo "  Icon: ${icon}" >> "${HOME}/.idesktop/${modcaption}.lnk"
echo "  X: ${currentxvalue}" >> "${HOME}/.idesktop/${modcaption}.lnk"
echo "  Y: ${currentyvalue}" >> "${HOME}/.idesktop/${modcaption}.lnk"
echo "  Command[0]: ${command}" >> "${HOME}/.idesktop/${modcaption}.lnk"
#echo "  Command[1]: ${rightclick}" >> "${HOME}/.idesktop/${modcaption}.lnk"
echo "end" >> "${HOME}/.idesktop/${modcaption}.lnk"

$DIALOG --no-buttons --width 500 --title="$TEXT21" \
        --text="$TEXT22"  --timeout=3
refresh

}

####################################################################
####################################################################

argyyep()
{

firstwindow=argyyep

choice=$($DIALOG  --title  "$TEXT5" --width 450 --height 300 --center \
					--window-icon=/usr/share/icons/mxflux.png \
                    --list \
                   --column "$TEXT43" --column "$TEXT44"\
                   --text="$TEXT30" \
                   --button="$TEXT17":1 \
                "$PROPERTIES" "$TEXT24"  \
                "$DELETE" "$TEXT25"  \
                "$NEW" "$TEXT26"  \
                "$POSITION" "$TEXT48" \
                "$LOCK_TOGGLE"  "$LOCK_TOGGLE_TEXT" \
                "$REFRESH" "$TEXT27"  \
				"$CONFIGURE" "$TEXT28" \
				" "   " " \
				"$HELP" "$TEXT29" 2>/dev/null) 

retval=$?

choice="$(echo ${choice} | cut -d '|' -f1)"

echo $retval $choice

case $retval in
        0) case ${choice} in
                "$DELETE")	     deleteandrefresh
                ;;
                "$PROPERTIES")  getcurrentvalues
                             modifycaption
                ;;
	        "$REFRESH")     refresh
                ;;
	        "$NEW")         cap=""
                             command=""
	                     newcaption
                ;;
                "$LOCK_TOGGLE")  unlock_icons
                ;;
                "$CONFIGURE")   editconfig
                ;;
                "$POSITION") modifyXY
                ;;
           esac
           ;;
        *)      exit
                ;;
esac
}

##################################################################
###################################################################

argynope()
{

firstwindow=argynope

choice=$($DIALOG  --title "$TEXT5" --width 450 --height 300 --center \
				--window-icon=/usr/share/icons/mxflux.png \
                   --list \
                   --column "$TEXT43" --column "$TEXT44" \
                   --text "$TEXT30" \
                   --button="$TEXT17":1 \
                "$PROPERTIES" "$TEXT24"  \
                "$DELETE" "$TEXT25"  \
                "$NEW" "$TEXT26"  \
                "$POSITION" "$TEXT48" \
                "$LOCK_TOGGLE"  "$LOCK_TOGGLE_TEXT" \
                "$REFRESH" "$TEXT27"  \
				"$CONFIGURE" "$TEXT28" \
				" "   " " \
				"$HELP" "$TEXT29" 2>/dev/null)
				
retval=$?

choice="$(echo "${choice}" | cut -d '|' -f1)"

echo $retval $choice

case $retval in
        0) case ${choice} in 
                "$DELETE")	     getlnkfile
                             deleteandrefresh
                ;;
                "$PROPERTIES")  getlnkfile
                             getcurrentvalues
                             modifycaption
                             ;;
                View)  getlnkfile
                ;;
                "$REFRESH")     refresh
                ;;
                "$NEW")         cap=""
                             command=""
	                     newcaption
                ;;
                "$LOCK_TOGGLE")  unlock_icons
                ;;
                "$CONFIGURE")   editconfig
                ;;
                "$HELP") mxidesktool_help
                ;;
                "$POSITION") modifyXY
                ;;
           esac
           ;;
        *)      exit
                ;;
esac
}

##########################################################
##########################################################
editconfig()
{
yad --title $TEXT31 --width 500 --height 600 --center \
	--text-info --editable < <(cat "${HOME}/.ideskrc") 2>/dev/null > /tmp/editbox.txt.$$

case $? in
      0) cat "/tmp/editbox.txt.$$" > "${HOME}/.ideskrc"
         rm -f "/tmp/editbox.txt.$$"
         refresh
         argynope
         ;;
      *) rm -f "/tmp/editbox.txt.$$"
         argynope
         ;;
esac

}

##########################################################
##########################################################

mxidesktool_help()
{

local browser url

url="https://mxlinux.org/wiki/help-files/help-mx-idesktool"

##If an mx-viewer is present, use mx-viewer, otherwise use generic xdg-open 
if [ -e "/usr/bin/mx-viewer" ]; then
    browser="mx-viewer"
else
    browser="xdg-open"
fi
$browser $url &

argynope

}

unlock_icons()
{
#grep for Locked: true and if present change to Locked: false

local test toggle

test="$(grep Locked: "${HOME}/.ideskrc" |grep true)"

if [ -n "$test" ]; then
    sed -i s/Locked.*/'Locked: false'/ "${HOME}/.ideskrc"
    else
    sed -i s/Locked.*/'Locked: true'/ "${HOME}/.ideskrc"
fi

$DIALOG  --title "$TEXT5" --width 250 --height 30 --center \
		 --text="$TEXT22"	\
		 --button="OK"

refresh

}

##########################################################
##########################################################

#now let's see whether the configuration files are present
if [ -e "${HOME}/.ideskrc" ]; then
        echo "$TEXT32"
else
        $DIALOG --center --title $TEXT31 \
                --text $TEXT33 \
                --button="$TEXT34!gtk-no":1 --button="$TEXT35!gtk-yes":0
case $? in
        0) writeconf
           $DIALOG --center --title $TEXT31 \
                --button=$TEXT34:1 --button=$TEXT35:0 \
                --text $TEXT36 2>/dev/null
           case $? in
                   0) argynope
                      ;;
                   *) exit
                      ;;
           esac
           ;;
        *) exit
           ;;
esac
fi

echo $argy
if [ "${argy}" = "nope" ]; then
        argynope
else
        currentlnkfile="${HOME}/.idesktop/${argu}"
        echo "current link file is " $currentlnkfile
        argyyep
fi

This is modification of a script from your github.

One form dialog for X and Y icon coordinates.

#7 Post by **Jerry3904** » Tue Mar 10, 2020 1:58 pm

Thanks, again! Off to give it a spin.

#8 Post by **Jerry3904** » Tue Mar 10, 2020 2:10 pm

Hmmm. I first tried just opening and clicking on the Position entry, but the X and Y dialog boxes opened but no icon had been selected. Then I opened Position again, and pressed the Back key. That ran through the regular edit process, but the X Y boxes did not show.

I will take a closer look tonight.

#9 Post by **Jerry3904** » Wed Mar 11, 2020 6:53 pm

Jerry3904 wrote: Tue Mar 10, 2020 9:12 am Final: everything works with this, no conflicts.
Code: Select all
table Actions
  Lock: control right doubleClk
  Reload: control left singleClk
  Drag: right hold
  EndDrag: right singleClk
  Execute[0]: left singleClk
  Execute[1]: middle singleClk
end
Time to get to real work...

I'm going to use this b/c it doesn't change what we have been doing so far, so neither the user nor the documentation has to change.

Having a working set of commands means now that earlier suggestions, such as spidermouse's XY proposal, can be reevaluated.

#10 Post by **spidermouse** » Thu Mar 12, 2020 4:36 am

Jerry3904 wrote: Tue Mar 10, 2020 2:10 pm Hmmm. I first tried just opening and clicking on the Position entry, but the X and Y dialog boxes opened but no icon had been selected. Then I opened Position again, and pressed the Back key. That ran through the regular edit process, but the X Y boxes did not show.

I will take a closer look tonight.

I should install MX in some VM to see what's going on.
Probably different yad versions.

MX Linux Forum

getting idesk second command to work

getting idesk second command to work

Re: getting idesk second command to work

Re: getting idesk second command to work

Re: getting idesk second command to work

Re: getting idesk second command to work

Re: getting idesk second command to work

Re: getting idesk second command to work

Re: getting idesk second command to work

Re: getting idesk second command to work

Re: getting idesk second command to work