Support for MX and antiX Linux distros
https://www.forum.mxlinux.org/
Code: Select all
System: Kernel: 6.1.0-31-amd64 [6.1.128-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/vmlinuz root=UUID=<filter> verbose Desktop: KDE Plasma v: 5.27.5 tk: Qt v: 5.15.8 wm: kwin_x11 vt: 7 dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto Jan 12 2025 base: Debian GNU/Linux 12 (bookworm) Machine: Type: Desktop System: HP product: HP ProDesk 600 G2 DM v: N/A serial: <superuser required> Chassis: type: 15 serial: <superuser required> Mobo: HP model: 8169 v: KBC Version 05.39 serial: <superuser required> UEFI: HP v: N22 Ver. 02.58 date: 07/29/2022 Battery: Device-1: hidpp_battery_0 model: Logitech Marathon Mouse/Performance Plus M705 serial: <filter> charge: 55% (should be ignored) rechargeable: yes status: discharging Device-2: hidpp_battery_1 model: Logitech MK700 serial: <filter> charge: 70% (should be ignored) rechargeable: yes status: discharging CPU: Info: model: Intel Pentium G4400 bits: 64 type: MCP arch: Skylake-S level: v2 built: 2015 process: Intel 14nm family: 6 model-id: 0x5E (94) stepping: 3 microcode: 0xF0 Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB Speed (MHz): avg: 900 min/max: 800/3300 scaling: driver: intel_pstate governor: powersave cores: 1: 900 2: 900 bogomips: 13199 Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: KVM: VMX disabled Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled Type: mds mitigation: Clear CPU buffers; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled Type: reg_file_data_sampling status: Not affected Type: retbleed mitigation: IBRS Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: disabled; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected Type: srbds mitigation: Microcode Type: tsx_async_abort status: Not affected Graphics: Device-1: Intel HD Graphics 510 vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-9 process: Intel 14n built: 2015-16 ports: active: DP-3 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:1902 class-ID: 0300 Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1 Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93") Monitor-1: DP-3 model: TERRA 2445W serial: <filter> built: 2013 res: 1920x1080 hz: 60 dpi: 94 gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes: max: 1920x1080 min: 720x400 API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 510 (SKL GT1) direct-render: Yes Audio: Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a170 class-ID: 0403 API: ALSA v: k6.1.0-31-amd64 status: kernel-api tools: alsamixer,amixer Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl Network: Device-1: Intel Ethernet I219-LM vendor: Hewlett-Packard driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15b7 class-ID: 0200 IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> Device-2: Intel Wireless 3160 driver: iwlwifi v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:08b4 class-ID: 0280 IF: wlan0 state: down mac: <filter> Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:3 chip-ID: 8087:07dc class-ID: e001 Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0 sub-v: f00 hci-v: 4.0 rev: f00 Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio, telephony Drives: Local Storage: total: 924.07 GiB used: 19.81 GiB (2.1%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Transcend model: TS512GMTE110S size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: VC2S038D temp: 21.9 C scheme: GPT ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: Ultra II 480GB size: 447.13 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 20RL scheme: GPT Partition: ID-1: / raw-size: 476.69 GiB size: 468.13 GiB (98.21%) used: 19.81 GiB (4.2%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 275 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap Sensors: System Temperatures: cpu: 18.0 C pch: 27.5 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: 3048 pm: dpkg pkgs: 3035 libs: 1697 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0 pm: flatpak pkgs: 13 No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/google-chrome.list 1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main Active apt repos in: /etc/apt/sources.list.d/mx.list 1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free Info: Processes: 208 Uptime: 2m wakeups: 5 Memory: 7.64 GiB used: 2 GiB (26.2%) Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26 Boot Mode: UEFI
sehr gut. Das sind die richtigen Fragen. Ich bin davon ausgegangen, dass die Scanner-Frontends schon installiert sind aber nicht funktionieren, weil ein Treiber fehlt. Aber vielleicht fehlt es nur an SANE. Deshalb die Frage an @MX-Rick , was sagt denn
Code: Select all
sudo sane-find-scanner
scanimage -Loder im Anwendungsmenu/Startermenu aufrufen. Wahrscheinlich in der Abteilung "Graphik" -> dort heisst es "Dokument-Scanner". Zur Not gibt es im Anwendungsmenu auch einen Menupunkt "Werkzeuge" -> "Anwendungsfinder". Dort kannst Du simple-scan eingeben und der Menupunkt wird angezeigt. Ist etwas davon abhängig, welches Environment Du benutzt, sieht bei KDE wahrscheinlich anders aus.