Install fluxgui

[debu]

Is this what you mean? I may have it completely wrong but pretty sure there isn't a systemd boot option in the Advanced Options in the Grub boot menu. I seem to remember reading somewhere that systemd support was dropped in 21.1.

FWIW, I am booting from a live USB with persistence.

Curious to learn what you make of this.

Thank you.

Code: Select all

System:    Kernel: 5.10.0-13-686-pae i686 bits: 32 compiler: gcc v: 10.2.1 
           parameters: persist_static quiet splasht nosplash 
           Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.16.1 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-21.1_386 Wildflower April 9  2022 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: NEC product: PC-VY22MAZ7A v: N/A serial: <filter> Chassis: 
           type: 10 serial: <filter> 
           Mobo: NEC model: NML95 v: 1AG2 serial: <filter> BIOS: NEC v: NOTE Version /574A0900 
           date: 03/17/2011 
Battery:   ID-1: BAT1 charge: 0% condition: 11.5/17.8 Wh (64.6%) volts: 1.1 min: 11.1 
           model: NEC PC-VP-WP114 type: Li-ion serial: N/A status: Unknown 
CPU:       Info: Single Core model: Intel Celeron 900 bits: 64 type: MCP arch: Penryn family: 6 
           model-id: 17 (23) stepping: A (10) microcode: A0B cache: L2: 1024 KiB 
           flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 4388 
           Speed: 2194 MHz min/max: N/A Core speed (MHz): 1: 2194 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX unsupported 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel Mobile 4 Series Integrated Graphics vendor: NEC driver: i915 
           v: kernel bus-ID: 00:02.0 chip-ID: 8086:2a42 class-ID: 0300 
           Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver: 
           loaded: modesetting unloaded: fbdev,vesa display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0") 
           s-diag: 414mm (16.3") 
           Monitor-1: LVDS-1 res: 1366x768 hz: 60 dpi: 101 size: 344x194mm (13.5x7.6") 
           diag: 395mm (15.5") 
           OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express (CTG) v: 2.1 Mesa 20.3.5 
           direct render: Yes 
Audio:     Device-1: Intel 82801I HD Audio vendor: NEC driver: snd_hda_intel v: kernel 
           bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403 
           Sound Server-1: ALSA v: k5.10.0-13-686-pae running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: Broadcom NetLink BCM5784M Gigabit Ethernet PCIe vendor: NEC driver: tg3 
           v: kernel port: 1c00 bus-ID: 03:00.0 chip-ID: 14e4:1698 class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
           Device-2: BUFFALO (formerly Mel ) WLI-UC-GNM Wireless LAN Adapter [Ralink RT8070] 
           type: USB driver: rt2800usb bus-ID: 7-6:2 chip-ID: 0411:01a2 class-ID: 0000 
           serial: <filter> 
           IF: wlan0 state: up mac: <filter> 
           IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:    Local Storage: total: 206.8 GiB used: 4.95 GiB (2.4%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD1600BEVT-26A23T0 
           size: 149.05 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD 
           rpm: 5400 serial: <filter> rev: 1A01 scheme: MBR 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Kingston model: DataTraveler 3.0 
           size: 57.75 GiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> 
           rev: PMAP scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: file size: 750 MiB used: 1 MiB (0.1%) priority: -2 
           file: /live/boot-dev/swap-file 
Sensors:   System Temperatures: cpu: 59.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2025 lib: 1009 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/airvpn-stable.list 
           1: deb http://eddie.website/repository/apt/ stable main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
           No active apt repos in: /etc/apt/sources.list.d/nathan-renniewaldock-ubuntu-flux-jammy.list 
Info:      Processes: 206 Uptime: 1h 42m wakeups: 2 Memory: 3.81 GiB used: 2.11 GiB (55.3%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1 
           alt: 10 Shell: Bash v: 5.1.4 running-in: quick-system-info-mx 
           inxi: 3.3.06 
Boot Mode: BIOS (legacy, CSM, MBR)

[Huckleberry Finn]

... pretty sure there isn't a systemd boot option in the Advanced Options in the Grub boot menu.... FWIW, I am booting from a live USB with persistence.

So, that's normal.

...remember reading somewhere that systemd support was dropped in 21.1

Nope. Just, no systemd on live-session. :)

[wdscharff]

You can install sct no matter you use it or not, it's so small and won't be running in the background all the time:
....
Meanwhile, this may be useful: https://iristech.co/what-is-the-best-color-temperature/

P.S. You can also create launchers/icons with those commands and put to desktop / panel and just click.. for a few values If you like and one to reset ...

Thanks for pointing out sct (and the link), that's exactly the little programm I was looking for for me and my fluxbox installation

[Huckleberry Finn]

You're welcome, glad to hear it worked :)