Grub und Remote [Solved]

[fehlix]

Hallo fehlix,
kriegt @MX-Rick zwar wahrscheinlich selbst hin, aber trotzdem:

Code: Select all

sudo grep -i windows /boot/grub/grub/grub.cfg

da ist im Eifer des Gefechtes ein grub zuviel reingerutscht, soll ja wohl heissen

Code: Select all

sudo grep -i windows /boot/grub/grub.cfg

viele Grüsse gosia

Ja, sollte wohl zum Mitdenken motivieren. Hat's wohl auch gemacht. Danke.

[MX-Rick]

Windows Boot Manager (on /dev/sda1) steht in MX Bootoptions.
Das mit dem Starter bekomme ich nicht hin da es im KDE bestimmt ander heist. (ich binn noch immernicht besonders gut)

Ich komme nicht weiter bin zu Dumm
ich vermute :sudo grep -i windows /boot/grub/grub.cfg kommt in die Konsole.

in den Starter mx-pkexec grub-reboot Windows Boot Manager

[fehlix]

Windows Boot Manager (on /dev/sda1) steht in MX Bootoptions.
Das mit dem Starter bekomme ich nicht hin da es im KDE bestimmt ander heist. (ich binn noch immernicht besonders gut)

Ich komme nicht weiter bin zu Dumm
ich vermute :sudo grep -i windows /boot/grub/grub.cfg kommt in die Konsole.

in den Starter mx-pkexec grub-reboot Windows Boot Manager

Naja ohne "QSI" sag ich erstmal nix mehr.

[MX-Rick]

Code: Select all

Snapshot created on: 20250216_1054
System:
  Kernel: 6.1.0-31-amd64 [6.1.128-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-31-amd64 root=UUID=<filter> ro verbose quiet splash
    init=/lib/systemd/systemd
  Desktop: KDE Plasma v: 5.27.5 tk: Qt v: 5.15.8 wm: kwin_x11 vt: 7 dm: LightDM v: 1.32.0
    Distro: MX-23.5_x64 Libretto Jan 12 2025 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Desktop System: HP product: HP ProDesk 600 G2 DM v: N/A serial: <superuser required>
    Chassis: type: 15 serial: <superuser required>
  Mobo: HP model: 8169 v: KBC Version 05.39 serial: <superuser required> UEFI: HP
    v: N22 Ver. 02.58 date: 07/29/2022
CPU:
  Info: model: Intel Pentium G4400 bits: 64 type: MCP arch: Skylake-S level: v2 built: 2015
    process: Intel 14nm family: 6 model-id: 0x5E (94) stepping: 3 microcode: 0xF0
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB
    L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 900 min/max: 800/3300 scaling: driver: intel_pstate governor: powersave
    cores: 1: 900 2: 900 bogomips: 13199
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds mitigation: Clear CPU buffers; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT disabled
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: disabled; RSB filling;
    PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel HD Graphics 510 vendor: Hewlett-Packard driver: i915 v: kernel arch: Gen-9
    process: Intel 14n built: 2015-16 ports: active: DP-3 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:1902 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: kwin_x11 driver: X: loaded: modesetting
    unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: DP-3 model: TERRA 2445W serial: <filter> built: 2013 res: 1920x1080 hz: 60 dpi: 94
    gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes: max: 1920x1080
    min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 510 (SKL GT1)
    direct-render: Yes
Audio:
  Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a170 class-ID: 0403
  API: ALSA v: k6.1.0-31-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I219-LM vendor: Hewlett-Packard driver: e1000e v: kernel port: N/A
    bus-ID: 00:1f.6 chip-ID: 8086:15b7 class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: Intel Wireless 3160 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:08b4 class-ID: 0280
  IF: wlan0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:3
    chip-ID: 8087:07dc class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
    sub-v: f00 hci-v: 4.0 rev: f00
  Info: acl-mtu: 1021:5 sco-mtu: 96:6 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 924.07 GiB used: 22.16 GiB (2.4%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Transcend model: TS512GMTE110S size: 476.94 GiB
    block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: VC2S038D temp: 28.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: Ultra II 480GB size: 447.13 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 20RL scheme: GPT
Partition:
  ID-1: / raw-size: 476.69 GiB size: 468.13 GiB (98.21%) used: 22.16 GiB (4.7%) fs: ext4
    dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 275 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 31.0 C pch: 36.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 3036 libs: 1697 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
  Processes: 226 Uptime: 3m wakeups: 0 Memory: 7.64 GiB used: 2.84 GiB (37.1%) Init: systemd v: 252
  target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

entschuldigung

[MX-Rick]

Ist zwar nich die Lösung aber ein Weg

[fehlix]

Ist zwar nich die Lösung aber ein Weg

Eine anderer Lösungsweg wäre die Verwendung von UEFI-Boot-Einträgen und dabei "Boot Next" zu setzen z.B. mit MX-Boot-Options:

MX-Boot-Options-UEFI-Manger-Boot-next.jpg