ich habe mxlinux 23.4 auf meinem alten Samsaung R41 installiert ohne Probleme.
Jedoch kann ich keine Programme installieren wie z. B. Falkon
orion1955@SamsungR41:~/Schreibtisch
$ sudo apt-get install falkon
[sudo] Passwort für orion1955:
E: Der dpkg-Prozess wurde unterbrochen; Sie müssen manuell »sudo dpkg --configure -a« ausführen, um das Problem zu beheben.
orion1955@SamsungR41:~/Schreibtisch
Code: Select all
System: Kernel: 6.1.0-25-686-pae [6.1.106-3] arch: i686 bits: 32 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-25-686-pae root=UUID=<filter> ro quiet splash Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7 dm: LightDM v: 1.32.0 Distro: MX-23.4_386 Libretto September 15 2024 base: Debian GNU/Linux 12 (bookworm) Machine: Type: Other-vm? System: SAMSUNG product: R40/R41 v: 07YA serial: <superuser required> Chassis: type: 1 serial: <superuser required> Mobo: SAMSUNG model: R40/R41 serial: <superuser required> BIOS: Phoenix v: 07YA date: 12/18/2006 Battery: ID-1: BAT1 charge: 10.0 Wh (100.0%) condition: 10.0/44.4 Wh (22.5%) volts: 12.5 min: 11.1 model: SAMSUNG Electronics type: Li-ion serial: N/A status: full CPU: Info: model: Intel T2060 bits: 32 type: MCP arch: M Yonah built: 2006-08 process: Intel 65nm family: 6 model-id: 0xE (14) stepping: 0xC (12) microcode: 0x59 Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 1024 KiB desc: 1x1024 KiB Speed (MHz): avg: 800 min/max: 1000/2000 scaling: driver: acpi-cpufreq governor: ondemand cores: 1: 800 2: 800 bogomips: 6400 Flags: ht nx pae sse sse2 sse3 Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: KVM: VMX unsupported Type: l1tf mitigation: PTE Inversion Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled Type: meltdown mitigation: PTI Type: mmio_stale_data status: Unknown: No mitigations Type: reg_file_data_sampling status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass status: Not affected Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Retpolines; STIBP: disabled; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: AMD RC410M [Mobility Radeon Xpress 200M] vendor: Samsung Co driver: radeon v: kernel alternate: radeonfb,amdgpu arch: Rage-8 code: R300 process: TSMC 130nm built: 2002-07 ports: active: LVDS-1 empty: SVIDEO-1,VGA-1 bus-ID: 01:05.0 chip-ID: 1002:5a62 class-ID: 0300 Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X: loaded: radeon unloaded: fbdev,modesetting,vesa dri: r300 gpu: radeon display-ID: :0.0 screens: 1 Screen-1: 0 s-res: 1280x800 s-dpi: 96 s-size: 338x211mm (13.31x8.31") s-diag: 398mm (15.69") Monitor-1: LVDS-1 mapped: LVDS res: 1280x800 hz: 60 size: N/A modes: max: 1280x800 min: 640x480 API: OpenGL v: 2.1 Mesa 22.3.6 renderer: ATI RC410 direct-render: Yes Audio: Device-1: AMD IXP SB4x0 High Definition Audio vendor: Samsung Co driver: snd_hda_intel v: kernel bus-ID: 00:14.2 chip-ID: 1002:437b class-ID: 0403 API: ALSA v: k6.1.0-25-686-pae status: kernel-api tools: alsamixer,amixer Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl Network: Device-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Samsung Co driver: 8139too v: 0.9.28 modules: 8139cp port: a000 bus-ID: 02:05.0 chip-ID: 10ec:8139 class-ID: 0200 IF: eth0 state: down mac: <filter> Device-2: Qualcomm Atheros AR2413/AR2414 Wireless Network Adapter [AR5005G 802.11bg] vendor: Askey driver: ath5k v: kernel bus-ID: 02:07.0 chip-ID: 168c:001a class-ID: 0200 IF: wlan0 state: up mac: <filter> Drives: Local Storage: total: 104.68 GiB used: 8.57 GiB (8.2%) SMART Message: Unable to run smartctl. Root privileges required. ID-1: /dev/sda maj-min: 8:0 vendor: Hitachi model: HTS541612J9AT00 size: 104.68 GiB block-size: physical: 512 B logical: 512 B speed: <unknown> type: N/A serial: <filter> rev: A70H scheme: MBR Partition: ID-1: / raw-size: 104.68 GiB size: 102.48 GiB (97.90%) used: 8.57 GiB (8.4%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) ID-1: swap-1 type: file size: 1024 MiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap Sensors: System Temperatures: cpu: 81.0 C mobo: N/A Fan Speeds (RPM): N/A Repos: Packages: pm: dpkg pkgs: 2132 libs: 1061 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0 pm: flatpak pkgs: 0 No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware 2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware Active apt repos in: /etc/apt/sources.list.d/mx.list 1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free Info: Processes: 178 Uptime: 5m wakeups: 2 Memory: 1.84 GiB used: 705.3 MiB (37.5%) Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26 Boot Mode: BIOS (legacy, CSM, MBR)
wenn ich sudo dpkg --configure -a« eingebe und ausführe, stürzt bei ./dkms-make.sh das System ab.
Was kann ich tun?
