i am trying to give another go to avlmxe, but i am not lucky.
i am installing it on an external ssd drive. it boots fine on the laptop i have created it, but on my main machine it shows the splash with the options and i choose systemd, but i does not really matter, and it stops with an error:
Failed to Start Light Display Manager Error
i did the same with a ubuntu flavour yesterday and it did not give any sort of problems.
i did not create it on my main machine because at a certain point the installer shows a pop up sayng something about changing gpt on the computer and pc without boot-bios or something like that won't boot, so i was scared to mess up my machine.
i don't know. please help
Code: Select all
System: Kernel: 6.0.0-10.1-liquorix-amd64 [6.0-6~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: audit=0 intel_pstate=disable hpet=disable rcupdate.rcu_expedited=1
BOOT_IMAGE=/boot/vmlinuz-6.0.0-10.1-liquorix-amd64 root=UUID=<filter> ro quiet
threadirqs
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: Debian GNU/Linux 11 (bullseye)
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop Mobo: Gigabyte model: B550 AORUS ELITE AX V2 v: x.x serial: <filter>
UEFI: American Megatrends LLC. v: FDb date: 06/01/2023
CPU: Info: 8-Core model: AMD Ryzen 7 5700G with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 family: 19 (25) model-id: 50 (80) stepping: 0 microcode: A50000D cache:
L2: 4 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 121370
Speed: 1697 MHz min/max: 1400/3800 MHz boost: enabled Core speeds (MHz): 1: 1697
2: 1418 3: 1400 4: 1400 5: 1400 6: 1400 7: 1400 8: 1400 9: 1682 10: 1400 11: 1460
12: 1400 13: 1400 14: 2156 15: 1400 16: 1400
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Cezanne vendor: Gigabyte driver: amdgpu v: kernel bus-ID: 06:00.0
chip-ID: 1002:1638 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 5-2:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: compton v: 1 driver: loaded: amdgpu
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: HDMI-A-0 res: 1920x1080 dpi: 82 size: 598x336mm (23.5x13.2")
diag: 686mm (27")
OpenGL: renderer: AMD RENOIR (LLVM 14.0.5 DRM 3.48 6.0.0-10.1-liquorix-amd64)
v: 4.6 Mesa 22.0.5 direct render: Yes
Audio: Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel v: kernel
bus-ID: 06:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel
bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-3: BEHRINGER UMC204HD 192k type: USB driver: snd-usb-audio bus-ID: 3-2:2
chip-ID: 1397:0508 class-ID: 0103
Device-4: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 5-2:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k6.0.0-10.1-liquorix-amd64 running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel port: f000
bus-ID: 03:00.0 chip-ID: 10ec:8125 class-ID: 0200
IF: enp3s0 state: down mac: <filter>
Device-2: MEDIATEK RZ608 Wi-Fi 6E 80MHz driver: mt7921e v: kernel modules: wl
port: f000 bus-ID: 04:00.0 chip-ID: 14c3:0608 class-ID: 0280
IF: wlp4s0 state: up mac: <filter>
Bluetooth: Device-1: MediaTek Wireless_Device type: USB driver: btusb v: 0.8 bus-ID: 1-5:3
chip-ID: 0e8d:0608 class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 1 state: down bt-service: N/A rfk-block:
hardware: no software: no address: <filter>
Info: acl-mtu: 1021:6 sco-mtu: 240:8 link-policy: rswitch sniff link-mode: slave accept
Drives: Local Storage: total: 3.64 TiB used: -560473501
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SNV2S1000G size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
serial: <filter> rev: SBM02103 temp: 23.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM010-2EP102 size: 931.51 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200
serial: <filter> rev: CC46 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: PSSD T7 size: 931.51 GiB
block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> scheme: GPT
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-4: /dev/sdc maj-min: 8:32 type: USB vendor: Toshiba model: MQ04UBF100
size: 931.51 GiB block-size: physical: 512 B logical: 512 B type: HDD rpm: 5400
serial: <filter> scheme: MBR
Partition: ID-1: / raw-size: 103.3 GiB size: 100.62 GiB (97.40%) used: 43.72 GiB (43.5%) fs: ext4
dev: /dev/nvme0n1p5 maj-min: 259:5
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%) used: 26.7 MiB (27.9%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1
Swap: Kernel: swappiness: 10 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 6 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/nvme0n1p7 maj-min: 259:7
Sensors: System Temperatures: cpu: 24.0 C mobo: 22.0 C gpu: amdgpu temp: 30.0 C
Fan Speeds (RPM): N/A
Repos: Packages: note: see --pkg apt: 2820 lib: 1531 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bullseye main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://it.mxrepo.com/mx/repo/ bullseye main non-free
2: deb http://it.mxrepo.com/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/protonvpn-stable.list
1: deb [signed-by=/usr/share/keyrings/protonvpn-stable-archive-keyring.gpg] https://repo.protonvpn.com/debian stable main
Info: Processes: 449 Uptime: 1m wakeups: 1 Memory: 27.28 GiB used: 2.2 GiB (8.1%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI
