Code: Select all
System: Kernel: 5.10.0-32-amd64 [5.10.223-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-32-amd64 root=UUID=<filter> ro splash quiet
init=/lib/systemd/systemd
Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM
Distro: MX-21.3_KDE_x64 Wildflower September 18 2022
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: TOSHIBA product: SATELLITE C55D-C v: PSCQEE-03C00TEN
serial: <filter>
Mobo: FF50 model: 06F7 serial: <filter> UEFI: Insyde v: 5.20 date: 10/02/2015
Battery: ID-1: BAT1 charge: 12.3 Wh (48.6%) condition: 25.3/31.7 Wh (79.7%) volts: 15.9
min: 14.4 model: Panasonic PA5185U-1BRS type: Li-ion serial: N/A status: Charging
cycles: 262
CPU: Info: Quad Core model: AMD A8-7410 APU with AMD Radeon R5 Graphics bits: 64 type: MCP
arch: Puma family: 16 (22) model-id: 30 (48) stepping: 1 microcode: 7030105 cache:
L2: 2 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 17566
Speed: 1138 MHz min/max: 1000/2200 MHz boost: enabled Core speeds (MHz): 1: 1138
2: 1140 3: 1097 4: 1134
Vulnerabilities: Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: AMD Mullins [Radeon R4/R5 Graphics] vendor: Toshiba driver: radeon v: kernel
alternate: amdgpu bus-ID: 00:01.0 chip-ID: 1002:9851 class-ID: 0300
Device-2: IMC Networks TOSHIBA Web Camera - HD type: USB driver: uvcvideo
bus-ID: 2-1.1:3 chip-ID: 13d3:5652 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: kwin_x11 driver: loaded: ati,radeon
unloaded: fbdev,modesetting,vesa display-ID: :0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: eDP res: 1366x768 hz: 60 dpi: 101 size: 344x194mm (13.5x7.6")
diag: 395mm (15.5")
OpenGL: renderer: AMD KABINI (LLVM 14.0.5 DRM 2.50 5.10.0-32-amd64) v: 4.5 Mesa 22.0.5
direct render: Yes
Audio: Device-1: AMD Kabini HDMI/DP Audio vendor: Toshiba driver: snd_hda_intel v: kernel
bus-ID: 00:01.1 chip-ID: 1002:9840 class-ID: 0403
Device-2: AMD FCH Azalia vendor: Toshiba driver: snd_hda_intel v: kernel
bus-ID: 00:14.2 chip-ID: 1022:780d class-ID: 0403
Sound Server-1: ALSA v: k5.10.0-32-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Toshiba driver: r8169
v: kernel port: 3000 bus-ID: 01:00.0 chip-ID: 10ec:8136 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter driver: rtl8821ae
v: kernel modules: wl port: 2000 bus-ID: 02:00.0 chip-ID: 10ec:8821 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth: Device-1: Toshiba Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 2-1.2:4
chip-ID: 0930:022f class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.1 lmp-v: 4.0
sub-v: 8821 hci-v: 4.0 rev: a
Info: acl-mtu: 820:8 sco-mtu: 255:16 link-policy: rswitch hold sniff park
link-mode: slave accept service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 465.76 GiB used: 41.26 GiB (8.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter>
rev: 043 scheme: GPT
Partition: ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 41.13 GiB (86.1%) fs: ext4
dev: /dev/sda5 maj-min: 8:5
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 127.1 MiB (49.7%)
fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap: Alert: No swap data was found.
Sensors: System Temperatures: cpu: 51.5 C mobo: N/A gpu: radeon temp: 55.0 C
Fan Speeds (RPM): N/A
Repos: Packages: note: see --pkg apt: 2747 lib: 1514 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bullseye main contrib non-free
2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mkusb.list
1: deb http://ppa.launchpad.net/mkusb/ppa/ubuntu bionic main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye main non-free
2: deb http://mxlinux.mirrors.uk2.net/packages/mx/repo/ bullseye ahs
Active apt repos in: /etc/apt/sources.list.d/signal-xenial.list
1: deb [arch=amd64 signed-by=/usr/share/keyrings/signal-desktop-keyring.gpg] https://updates.signal.org/desktop/apt xenial main
Info: Processes: 231 Uptime: 32m wakeups: 1 Memory: 10.66 GiB used: 2.08 GiB (19.5%)
Init: systemd v: 247 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFIDue to my new ISP using CGNAT the port redirection in the router does not function so I am looking at IPv6 addresses as my old TP-Link router actually supports it along with a firewall.
Now to my question, if I issue ifconfig on a Raspberry Pi in my network the results show three inet6 addresses. One starts fe80:: and bears no resemblance to the other two, which are similar but one is longer. Plus if I use a IPv4 to IPv6 converter I get a fourth address which is different to the other three. Apart from the address starting fe80:: all the others will allow an ssh connection.
Why would three different IPv6 addresses be valid yet only one IPv4 address work?
Geffers
