Draging open windows from one WS to another not succed [Solved]

[harrykar]

Lastly seems something has changed in system(cause updates?) and applications windows (when dragged with touchpad) become full screen when touch the up part of screen like bounce off a wall, and they stop at the window header in the down part of the srceen.
Till the other day they crossed trough workspaces.
Am I or you also notice that behaviour?

[j2mcgreg]

QSI please.

[harrykar]

QSI please.

Sorry forgot it

Code: Select all

System:
  Kernel: 6.6.10-3-liquorix-amd64 [6.6-14~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable rcupdate.rcu_expedited=1 BOOT_IMAGE=/vmlinuz-6.6.10-3-liquorix-amd64
    root=UUID=<filter> ro rootflags=subvol=@ quiet splash fbcon=nodefer
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.1_ahs_x64 Libretto October 15  2023 base: Debian GNU/Linux
    12 (bookworm)
Machine:
  Type: Laptop System: HP product: HP 250 15.6 inch G9 Notebook PC v: Type1ProductConfigId
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: HP model: 8A1D v: 08.37 serial: <superuser required> UEFI: Insyde v: F.59
    date: 02/04/2023
Battery:
  ID-1: BAT1 charge: 23.6 Wh (58.7%) condition: 40.2/41.0 Wh (98.1%) volts: 11.4 min: 11.3
    model: Hewlett-Packard PABAS0241231 type: Li-ion serial: <filter> status: discharging
CPU:
  Info: model: 12th Gen Intel Core i5-1235U bits: 64 type: MST AMCP arch: Alder Lake level: v3
    note: check built: 2021+ process: Intel 7 (10nm ESF) family: 6 model-id: 0x9A (154) stepping: 4
    microcode: 0x430
  Topology: cpus: 1x cores: 10 mt: 2 tpc: 2 st: 8 threads: 12 smt: enabled cache: L1: 928 KiB
    desc: d-8x32 KiB, 2x48 KiB; i-2x32 KiB, 8x64 KiB L2: 6.5 MiB desc: 2x1.2 MiB, 2x2 MiB L3: 12 MiB
    desc: 1x12 MiB
  Speed (MHz): avg: 512 high: 785 min/max: 400/2501 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 785 2: 524 3: 764 4: 578 5: 400 6: 400 7: 400 8: 400 9: 500 10: 400
    11: 500 12: 500 bogomips: 59904
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Enhanced / Automatic IBRS, IBPB: conditional, RSB filling,
    PBRSB-eIBRS: SW sequence
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Alder Lake-UP3 GT2 [UHD Graphics] vendor: Hewlett-Packard driver: i915 v: kernel
    arch: Gen-12.2 process: Intel 10nm built: 2021-22+ ports: active: eDP-1 empty: DP-1, DP-2, DP-3,
    HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:4628 class-ID: 0300
  Device-2: Cheng Uei Precision Industry (Foxlink) HP True Vision HD Camera type: USB
    driver: uvcvideo bus-ID: 1-5:2 chip-ID: 05c8:0b05 class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: ChiMei InnoLux 0x153b built: 2020 res: 1920x1080 hz: 60 dpi: 142
    gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel Graphics (ADL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Alder Lake PCH-P High Definition Audio vendor: Hewlett-Packard
    driver: sof-audio-pci-intel-tgl alternate: snd_hda_intel,snd_sof_pci_intel_tgl bus-ID: 00:1f.3
    chip-ID: 8086:51c8 class-ID: 0401
  API: ALSA v: k6.6.10-3-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 4000 bus-ID: 02:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Realtek vendor: Hewlett-Packard driver: rtw89_8852be v: kernel modules: wl pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:b852 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-10:3
    chip-ID: 0bda:b85c class-ID: e001 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter>
  Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony
Drives:
  Local Storage: total: 476.94 GiB used: 124.46 GiB (26.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: WD PC SN740 SDDPNQD-512G-1006
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
    serial: <filter> rev: HPS3 temp: 31.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 463.42 GiB size: 463.42 GiB (100.00%) used: 124.14 GiB (26.8%) fs: btrfs
    dev: /dev/dm-0 maj-min: 253:0 mapped: luks-<filter>
  ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 323.2 MiB (33.2%) fs: ext4
    dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-3: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 288 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-4: /home raw-size: 463.42 GiB size: 463.42 GiB (100.00%) used: 124.14 GiB (26.8%) fs: btrfs
    dev: /dev/dm-0 maj-min: 253:0 mapped: luks-<filter>
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 11.98 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/dm-1
    maj-min: 253:1 mapped: luks-<filter>
Sensors:
  System Temperatures: cpu: 51.0 C mobo: N/A
  Fan Speeds (RPM): cpu: 0 fan-2: 0
Repos:
  Packages: pm: dpkg pkgs: 2348 libs: 1209 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/backports.list
    1: deb https://deb.debian.org/debian/ bookworm-backports main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/fasttrack.list
    1: deb https://fasttrack.debian.net/debian/ bookworm-fasttrack main contrib non-free
  Active apt repos in: /etc/apt/sources.list.d/librewolf.list
    1: deb [arch=amd64] http://deb.librewolf.net bookworm main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://ftp.cc.uoc.gr/mirrors/linux/mx/mx/repo/ bookworm main non-free
    2: deb http://ftp.cc.uoc.gr/mirrors/linux/mx/mx/repo/ bookworm ahs
Info:
  Processes: 397 Uptime: 2h 47m wakeups: 21115 Memory: 7.44 GiB used: 2.71 GiB (36.4%)
  Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0
  alt: 12 clang: 14.0.6 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

[CharlesV]

I havent noticed any change here, (But I have had only limited time on mx23 with dual monitors in the last week - and I never run more than one workspace.)

MX Tweak | Window Manager | Advanced Tab is where the Snapping and Workspace settings are - you might try playing a bit with them. Default I believe is off on screen edge Wrap.

[MXRobo]

FYI – MX-21.3 Xfce, Window Manager Tweaks → Accessibility has some tile and MAYBE edge resistance window snapping that MAY be relevant – unfamiliar with MX-23.

[harrykar]

I havent noticed any change here, (But I have had only limited time on mx23 with dual monitors in the last week - and I never run more than one workspace.)

MX Tweak | Window Manager | Advanced Tab is where the Snapping and Workspace settings are - you might try playing a bit with them. Default I believe is off on screen edge Wrap.

Yep tick With a dragged window does the trick. Thank you
AFAIK I hadn't touched that setting.The only changes I remember did last days was install new Licq kernel from repo and sporadic automatic updates from updater.
Since Mx's installation till few days ago i remember that feature was enabled.

[CharlesV]

excellent! glad that is resolved.

[harrykar]

Did it again(mean I noticed right now) and as previously I'm pretty sure did nothing strange that can be correlated. Seems the system do it randomly. I had to find that thread because I don't remembered the necessary steps to fix it.
Let's see when would be the next time