Should I ignore amdgpu error in updates?

Message
Author
kd4e
Posts: 312
Joined: Mon Dec 06, 2021 5:26 pm

Should I ignore amdgpu error in updates?

#1 Post by kd4e »

The error messages about possible missing amdgpu files has returned.

It kinda flashed by but looked like 20 plus lines of error messages at the end of today's update.

I'm not observing any obvious problems, at the moment.

Is it a not-yet-addressed anomaly that I can ignore?

Thanks!

Code: Select all

System:
  Kernel: 6.5.5-2-liquorix-amd64 [6.5-6~mx23+1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable hpet=disable rcupdate.rcu_expedited=1
    BOOT_IMAGE=/boot/vmlinuz-6.5.5-2-liquorix-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.1_x64 Libretto July 31  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: Acer product: Aspire A315-24P v: V1.03 serial: <superuser required>
  Mobo: MDC model: Herbag_MDU v: V1.03 serial: <superuser required> UEFI: Insyde v: 1.03
    date: 11/28/2022
Battery:
  ID-1: BAT1 charge: 42.8 Wh (100.0%) condition: 42.8/41.6 Wh (102.9%) volts: 12.7 min: 11.2
    model: LGC AP19B8K type: Li-ion serial: <filter> status: full
CPU:
  Info: model: AMD Ryzen 3 7320U with Radeon Graphics bits: 64 type: MT MCP arch: Zen 2 gen: 3
    level: v3 note: check built: 2020-22 process: TSMC n7 (7nm) family: 0x17 (23)
    model-id: 0xA0 (160) stepping: 0 microcode: 0x8A00008
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 2324 high: 3892 min/max: 900/6375 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1730 2: 2361 3: 3892 4: 3622 5: 1704 6: 1730
    7: 1830 8: 1730 bogomips: 38329
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed mitigation: untrained return thunk; SMT enabled with STIBP protection
  Type: spec_rstack_overflow mitigation: safe RET
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: always-on, RSB filling,
    PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Mendocino vendor: Acer Incorporated ALI driver: amdgpu v: kernel arch: RDNA-2
    code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports:
    active: HDMI-A-1 off: eDP-1 empty: DP-1,DP-2 bus-ID: 03:00.0 chip-ID: 1002:1506 class-ID: 0300
    temp: 41.0 C
  Device-2: Chicony ACER HD User Facing type: USB driver: uvcvideo bus-ID: 5-1:2
    chip-ID: 04f2:b79c class-ID: fe01 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: amdgpu
    unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 pos: primary model: Acer CB272U serial: <filter>
    built: 2021 res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2 size: 597x336mm (23.5x13.23")
    diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440 min: 720x400
  Monitor-2: eDP-1 mapped: eDP note: disabled model-id: HKC 0x3d00 built: 2021 res: 1920x1080
    dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes:
    max: 1920x1080 min: 640x480
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: AMD Radeon Graphics (raphael_mendocino LLVM
    15.0.6 DRM 3.54 6.5.5-2-liquorix-amd64) direct-render: Yes
Audio:
  Device-1: AMD Rembrandt Radeon High Definition Audio vendor: Acer Incorporated ALI
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1
    chip-ID: 1002:1640 class-ID: 0403
  Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Acer Incorporated ALI
    driver: snd_pci_acp6x v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x,
    snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps, snd_sof_amd_renoir, snd_sof_amd_rembrandt pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h/19h HD Audio vendor: Acer Incorporated ALI driver: snd_hda_intel
    v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.6 chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.5.5-2-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter vendor: Lite-On
    driver: mt7921e v: kernel modules: wl pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 02:00.0
    chip-ID: 14c3:7961 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Lite-On Wireless_Device type: USB driver: btusb v: 0.8 bus-ID: 1-2:2 chip-ID: 04ca:3802
    class-ID: e001 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 2303 hci-v: 5.2 rev: 3111
  Info: acl-mtu: 1021:6 sco-mtu: 240:8 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 1.03 TiB used: 27.39 GiB (2.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: OM8PGP4128P-AA size: 119.24 GiB
    block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: ELFKBO.2 temp: 26.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 type: USB vendor: Sabrent model: SABRENT size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B type: N/A serial: <filter> rev: 0204 scheme: MBR
Partition:
  ID-1: / raw-size: 118.99 GiB size: 116.56 GiB (97.96%) used: 27.39 GiB (23.5%) fs: ext4
    dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 47.5 C mobo: N/A gpu: amdgpu temp: 41.0 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2226 libs: 1157 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian/ bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian/ bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security/ bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mxrepo.com/mx/repo/ bookworm main non-free
    2: deb http://mxrepo.com/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/vscodium.list
    1: deb [ signed-by=/usr/share/keyrings/vscodium-archive-keyring.gpg ] https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium main
Info:
  Processes: 305 Uptime: 2h 22m wakeups: 1770 Memory: 7.01 GiB used: 4.62 GiB (65.9%)
  Init: SysVinit v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0
  alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

User avatar
richb
Administrator
Posts: 11021
Joined: Wed Jul 12, 2006 2:17 pm

Re: Should I ignore amdgpu error in updates?

#2 Post by richb »

I get that all the time. Never an issue. Those files I assume are for specific AMD GPU's. If your system does not have that GPU they are superfluous.
Forum Rules
Guide - How to Ask for Help

richb Administrator
System: MX 23 KDE
AMD A8 7600 FM2+ CPU R7 Graphics, 16 GIG Mem. Three Samsung EVO SSD's 250 GB

Charlie Brown

Re: Should I ignore amdgpu error in updates?

#3 Post by Charlie Brown »

Yep, ignorable. They're in fact "info" rather than errors.

Or, if you like only, the most recent firmware directly: viewtopic.php?p=756946#p756946

User avatar
Stevo
Developer
Posts: 14878
Joined: Fri Dec 15, 2006 7:07 pm

Re: Should I ignore amdgpu error in updates?

#4 Post by Stevo »

I think you still will get those lines even with the latest piping hot firmware; at least in my experience.

To reproduce the messages, you could try seeing if there's a log for whatever updater flashes them by you, or manually update the initramfs again:

Code: Select all

sudo update-initramfs -u
MXPI = MX Package Installer
QSI = Quick System Info from menu
The MX Test repository is mostly backports; not the same as Debian testing

Post Reply

Return to “Software / Configuration”