Partizione DATI bloccata

Message

#1 Post by **balarm** » Mon Dec 11, 2023 3:49 pm

[CODE]System:
  Kernel: 6.1.0-15-amd64 [6.1.66-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-15-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel, plank wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.1_x64 Libretto July 31  2023 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: LENOVO product: 4236V7L v: ThinkPad T420 serial: <superuser required>
    Chassis: type: 10 serial: <superuser required>
  Mobo: LENOVO model: 4236V7L serial: <superuser required> UEFI-[Legacy]: LENOVO
    v: 83ET82WW (1.52 ) date: 06/04/2018
Battery:
  ID-1: BAT0 charge: 10.6 Wh (100.0%) condition: 10.6/47.5 Wh (22.3%) volts: 12.2 min: 10.8
    model: Panasonic 42T4763 type: Li-ion serial: <filter> status: full
CPU:
  Info: model: Intel Core i5-2540M bits: 64 type: MT MCP arch: Sandy Bridge gen: core 2 level: v2
    built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2F
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 820 high: 883 min/max: 800/3300 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 883 2: 800 3: 797 4: 800 bogomips: 20732
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
    filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
    vendor: Lenovo ThinkPad T420 driver: i915 v: kernel arch: Gen-6 code: Sandybridge
    process: Intel 32nm built: 2011 ports: active: LVDS-1 empty: DP-1, DP-2, DP-3, HDMI-A-1,
    HDMI-A-2, HDMI-A-3, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0126 class-ID: 0300
  Device-2: Chicony integrated camera type: USB driver: uvcvideo bus-ID: 1-1.6:6
    chip-ID: 04f2:b221 class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 compositors: 1: xfwm v: 4.18.0 2: Compton v: 1 driver:
    X: loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.65x9.37") s-diag: 485mm (19.11")
  Monitor-1: LVDS-1 model: LG Display 0x02e2 built: 2010 res: 1600x900 hz: 60 dpi: 131 gamma: 1.2
    size: 310x174mm (12.2x6.85") diag: 355mm (14") ratio: 16:9 modes: 1600x900
  API: OpenGL v: 3.3 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 3000 (SNB GT2)
    direct-render: Yes
Audio:
  Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: Lenovo 6
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403
  API: ALSA v: k6.1.0-15-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel 82579LM Gigabit Network vendor: Lenovo ThinkPad T520 driver: e1000e v: kernel
    port: 5080 bus-ID: 00:19.0 chip-ID: 8086:1502 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel modules: wl
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:0085 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Broadcom BCM2045B (BDC-2.1) type: USB driver: btusb v: 0.8 bus-ID: 1-1.4:5
    chip-ID: 0a5c:217f class-ID: fe01 serial: <filter>
  Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.0 lmp-v: 3.0
    sub-v: 4203 hci-v: 3.0 rev: 2ec
  Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch hold sniff park
    link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony
Drives:
  Local Storage: total: 238.47 GiB used: 36.12 GiB (15.1%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Silicon Power model: SPCC Solid State Disk size: 238.47 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 818B
    scheme: MBR
Partition:
  ID-1: / raw-size: 61.15 GiB size: 60.02 GiB (98.15%) used: 25.92 GiB (43.2%) fs: ext4
    dev: /dev/sda5 maj-min: 8:5
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 50.0 C mobo: N/A
  Fan Speeds (RPM): cpu: 1964
Repos:
  Packages: pm: dpkg pkgs: 2330 libs: 1211 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://it.mxrepo.com/mx/repo/ bookworm main non-free
Info:
  Processes: 236 Uptime: 54m wakeups: 2 Memory: 7.64 GiB used: 1.86 GiB (24.3%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

Dopo aggiornamento monto la partizione "dati" ma risulta parzialmente bloccata, file e cartelle in sola lettura.
Grazie per l'aiuto.

Charlie Brown · #2 Post by **Charlie Brown** » Mon Dec 11, 2023 4:00 pm

viewtopic.php?p=756154#p756154

viewtopic.php?p=756120#p756120

#3 Post by **Eadwine Rose** » Mon Dec 11, 2023 4:04 pm

È possibile aggiornare alla versione 6.1.0-13 con "MX Boot Options", o avanzato in grub, per vedere se questo può aiutare a risolvere il problema.

#4 Post by **balarm** » Mon Dec 11, 2023 4:56 pm

Ho aggiornato ma il problema rimane; impossiblile creare o eliminare file/cartelle.

#5 Post by **Eadwine Rose** » Mon Dec 11, 2023 4:58 pm

Qual è l'output quando si esegue:

Code: Select all

lsblk -f

Charlie Brown · #6 Post by **Charlie Brown** » Mon Dec 11, 2023 5:02 pm

... e si tratta di una partizione ntfs o ext4?

Finché non pubblichi l'output, puoi aprire "MX Tweak", l'ultima scheda e controllare: "Abilita il montaggio dei dischi interni ...."

#7 Post by **balarm** » Mon Dec 11, 2023 5:21 pm

Code: Select all

MX21@mx:~
$ lsblk -f
NAME   FSTYPE FSVER LABEL                    UUID                                 FSAVAIL FSUSE% MOUNTPOINTS
sda                                                                                              
├─sda1 ntfs         Riservato per il sistema 303EA8AD3EA86D92                                    
├─sda2 ntfs                                  E6B2ACE0B2ACB689                                    
├─sda4                                                                                           
├─sda5 ext4   1.0   rootMX21                 30f2bcc9-f8ae-4eeb-b48b-c13335a3e613   31,3G    43% /
└─sda6 ntfs         DATILENOVO               4335F06B06570794                      117,7G     8% /media/MX21/DATILENOVO
sr0

Si monta regolarmente; apro e leggo regolarmente il contenuto delle cartelle ma senza nessuna modifica.

Charlie Brown · #8 Post by **Charlie Brown** » Mon Dec 11, 2023 5:26 pm

Ah, sì, è ntfs, proprio come pensavo.

Se avete anche Windows: Disattivare "Avvio veloce", perché tiene impegnati i dispositivi senza che si spengano veramente.

Se non c'è Windows, si può usare "Disk Manager" dal menu e selezionare ntfs-3g (piuttosto che ntfs).

#9 Post by **Eadwine Rose** » Mon Dec 11, 2023 5:31 pm

Mi è capitata la stessa cosa.

Se dopo l'avvio di Windows l'unità dati è montata in sola lettura, riavviare di nuovo Windows e vedere se il problema si risolve. Non è necessario effettuare il login, basta avviare il sistema e poi riavviare.

Ricevuto da @dolphin_oracle :)

#10 Post by **balarm** » Tue Dec 12, 2023 5:13 pm

Ho disattivato "Avvio veloce" in Windows.
Grazie

MX Linux Forum

Partizione DATI bloccata [Solved]

Partizione DATI bloccata

Re: Partizione DATI bloccata

Re: Partizione DATI bloccata

Re: Partizione DATI bloccata

Re: Partizione DATI bloccata

Re: Partizione DATI bloccata

Re: Partizione DATI bloccata

Re: Partizione DATI bloccata [Solved]

Re: Partizione DATI bloccata

Re: Partizione DATI bloccata