I am using mx-packageinstaller 23.9.01 & mx-packageinstaller-pkglist 23.10.01mx23 (yesterday evening 4 okt 23 I reinstalled the mx-packageinstaller in the hope the problem would go away, but it did not)
Using the CLI I get this output: "Segmentation fault"
I also attached the quick system after the CLI ouput
===================================================================
**** CLI output
$ sudo mxpi-launcher
/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_BE.UTF-8)
/usr/bin/mxpi-launcher: line 62: warning: setlocale: LC_ALL: cannot change locale (en_BE.UTF-8)
Starting /usr/bin/mx-packageinstaller
mx-packageinstaller version: 23.9.01
QMetaObject::connectSlotsByName: Connecting slot on_comboRemote_activated() with the first of the following compatible signals: ("activated(int)", "activated(QString)")
+++ void MainWindow::setProgressDialog() +++
+++ void MainWindow::setup() +++
dpkg-query -f '${Version}' -W flatpak
"/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_BE.UTF-8)"
"1.14.4-1"
apt-get update --print-uris | grep -m1 -qE '/mx/testrepo/dists/bookworm/test/'
"/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_BE.UTF-8)"
+++ void MainWindow::loadPmFiles() +++
+++ void MainWindow::refreshPopularApps() +++
+++ QStringList MainWindow::listInstalled() +++
dpkg --get-selections | grep -v deinstall | cut -f1
"/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_BE.UTF-8)"
+++ void MainWindow::displayPopularApps() const +++
+++ void MainWindow::displayPackages() +++
+++ QHash<QString, VersionNumber> MainWindow::listInstalledVersions() +++
Segmentation fault
===================================================================
***** Quick System info
Code: Select all
/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_BE.UTF-8)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = "en_BE.UTF-8",
LC_ADDRESS = "en_BE.UTF-8",
LC_NAME = "en_BE.UTF-8" ",
LC_MONETARY = "en_BE.UTF-8",
LC_PAPER = "en_BE.UTF-8" ",
LC_IDENTIFICATION = "en_BE.UTF-8",
LC_TELEPHONE = "en_BE.UTF-8",
LC_MESSAGES = "en_BE.UTF-8",
LC_MEASUREMENT = "en_BE.UTF-8",
LC_CTYPE = "en_BE.UTF-8",
LC_TIME = "en_BE.UTF-8",
LC_COLLATE = "en_BE.UTF-8" ",
LC_NUMERIC = "en_BE.UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = "en_BE.UTF-8",
LC_ADDRESS = "en_BE.UTF-8",
LC_NAME = "en_BE.UTF-8" ",
LC_MONETARY = "en_BE.UTF-8",
LC_PAPER = "en_BE.UTF-8" ",
LC_IDENTIFICATION = "en_BE.UTF-8",
LC_TELEPHONE = "en_BE.UTF-8",
LC_MESSAGES = "en_BE.UTF-8",
LC_MEASUREMENT = "en_BE.UTF-8",
LC_CTYPE = "en_BE.UTF-8",
LC_TIME = "en_BE.UTF-8",
LC_COLLATE = "en_BE.UTF-8" ",
LC_NUMERIC = "en_BE.UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_US.UTF-8").
System:
Kernel: 6.1.0-10-amd64 [6.1.38-2] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-10-amd64 root=UUID=<filter> ro quiet splash
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23_KDE_x64 Libretto July
31 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop Mobo: BESSTAR TECH model: UM700 serial: <superuser required>
UEFI: American Megatrends v: 5.14 date: 03/24/2022
CPU:
Info: model: AMD Ryzen 7 3750H with Radeon Vega Mobile Gfx bits: 64 type: MT MCP arch: Zen/Zen+
note: check gen: 1 level: v3 note: check built: 2019 process: GF 12nm family: 0x17 (23)
model-id: 0x18 (24) stepping: 1 microcode: 0x8108109
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 384 KiB
desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 2219 high: 3818 min/max: 1400/2300 boost: enabled scaling:
driver: acpi-cpufreq governor: ondemand cores: 1: 1527 2: 2487 3: 1526 4: 1527 5: 3816 6: 3818
7: 1527 8: 1527 bogomips: 36729
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT vulnerable
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series] driver: amdgpu
v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s
lanes: 16 ports: active: DP-1,DP-3,HDMI-A-1 empty: DP-2 bus-ID: 04:00.0 chip-ID: 1002:15d8
class-ID: 0300 temp: 48.0 C
Device-2: WinUSB USB C Video Adaptor type: USB driver: N/A bus-ID: 1-1.1:4 chip-ID: 9636:9300
class-ID: 1100 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: amdgpu unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0
screens: 1
Screen-1: 0 s-res: 7680x1440 s-dpi: 96 s-size: 2032x381mm (80.00x15.00")
s-diag: 2067mm (81.39")
Monitor-1: DP-1 mapped: DisplayPort-0 pos: left model: Samsung LC27G5xT serial: <filter>
built: 2022 res: 2560x1440 hz: 60 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23")
diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440 min: 720x400
Monitor-2: DP-3 mapped: DisplayPort-2 pos: right model: Samsung LC27G5xT serial: <filter>
built: 2023 res: 2560x1440 hz: 60 dpi: 109 gamma: 1.2 size: 597x336mm (23.5x13.23")
diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440 min: 720x400
Monitor-3: HDMI-A-1 mapped: HDMI-A-0 pos: primary,center model: Samsung LC27G5xT
serial: <filter> built: 2022 res: 2560x1440 hz: 60 dpi: 109 gamma: 1.2
size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon Vega 10 Graphics (raven LLVM 15.0.6 DRM
3.49 6.1.0-10-amd64) direct-render: Yes
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
bus-ID: 3-2.1:3 chip-ID: 0d8c:0014 gen: 3 class-ID: 0300 speed: 8 GT/s lanes: 16 bus-ID: 04:00.1
chip-ID: 1002:15de class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor driver: snd_pci_acp3x v: kernel
alternate: snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 04:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: Realtek driver: snd_hda_intel v: kernel pcie:
gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 04:00.6 chip-ID: 1022:15e3 class-ID: 0403
Device-4: C-Media Audio Adapter (Unitek Y-247A) type: USB
driver: cmedia_hs100b,snd-usb-audio,usbhid
API: ALSA v: k6.1.0-10-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wireless 7265 driver: iwlwifi v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:095a class-ID: 0280
IF: wlan0 state: up mac: <filter>
Device-2: Intel Ethernet I225-V driver: igc v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
link-max: gen: 2 speed: 5 GT/s port: N/A bus-ID: 03:00.0 chip-ID: 8086:15f3 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-3: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus-ID: 2-1.4:5
chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
IF: eth1 state: down mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 3-2.2:4
chip-ID: 8087:0a2a class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 2 state: down bt-service: N/A rfk-block: hardware: no
software: no address: <filter>
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
Drives:
Local Storage: total: 6.83 TiB used: 63.7 GiB (0.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: OM8PDP3512B-A01 size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: EDFK0S03 temp: 34.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 EVO 1TB size: 931.51 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 2B6Q scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: PSSD T7 size: 1.82 TiB
block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> scheme: GPT
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-4: /dev/sdc maj-min: 8:32 type: USB vendor: Seagate model: Expansion Desk size: 3.64 TiB
block-size: physical: 4096 B logical: 512 B type: N/A serial: <filter> rev: 9401 scheme: GPT
Partition:
ID-1: / raw-size: 476.69 GiB size: 468.13 GiB (98.21%) used: 63.7 GiB (13.6%) fs: ext4
dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 48.0 C mobo: N/A gpu: amdgpu temp: 48.0 C
Fan Speeds (RPM): N/A
Repos:
Packages: 2803 pm: dpkg pkgs: 2780 libs: 1528 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 23
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.tiguinet.net/mx/packages/mx/repo/ bookworm main non-free
2: deb http://mirror.tiguinet.net/mx/packages/mx/repo/ bookworm ahs
Active apt repos in: /etc/apt/sources.list.d/syncthing.list
1: deb https://apt.syncthing.net/ syncthing stable
Active apt repos in: /etc/apt/sources.list.d/vscode.list
1: deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main
Active apt repos in: /etc/apt/sources.list.d/vscodium.list
1: deb [ signed-by=/usr/share/keyrings/vscodium-archive-keyring.gpg ] https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium main
Info:
Processes: 309 Uptime: 12h 1m wakeups: 9 Memory: 13.6 GiB used: 5.12 GiB (37.6%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
