Updating Brave [Solved]

[CharlesV]

Aye they changed that repo a little while back. Mine switched automatically on mx21 as I recall. If your doesnt, then you can try removing and reloading the repo according to their new instructions.

[Leo]

Welp, I used MXPackage manager, uninstalled Brave, and reinstalled. I've got 1.58.127 now. Probably shoulda done that before making a fuss.

Thanks for your time...

[CharlesV]

AH very good fix! And no worries, that is good know!

[txm0523]

I also had the same issue with Brave. I uninstalled Brave through MX Package Installer and re-installed through MX Package installer. Everything is fine now.

[jonnken]

I've had this same issue trying to uninstall/reinstall Brave to get latest updated version.

Code: Select all

2023-09-27 17:35:28.410 WRN default: "W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repo.skype.com/deb stable InRelease: The following signatures were invalid: EXPKEYSIG 1F3045A5DF7587C3 Skype Linux Client Repository <se-um@microsoft.com>\nE: Repository 'https://brave-browser-apt-release.s3.brave.com buster InRelease' changed its 'Origin' value from '. buster' to 'Brave Software'\nE: Repository 'https://brave-browser-apt-release.s3.brave.com buster InRelease' changed its 'Label' value from '. buster' to 'Brave Browser'"

Worked on my Dell 6440, but not on Dell 755(info below). ?

Code: Select all

System:    Kernel: 4.19.0-25-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-4.19.0-25-amd64 
           root=UUID=<filter> ro quiet splash 
           Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm 4.14.0 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-19.4_x64 patito feo November 11  2020 
           base: Debian GNU/Linux 10 (buster) 
Machine:   Type: Desktop System: Dell product: OptiPlex 755 v: N/A serial: <filter> Chassis: 
           type: 3 serial: <filter> 
           Mobo: Dell model: 0DR845 serial: <filter> BIOS: Dell v: A22 date: 06/11/2012 
CPU:       Info: Dual Core model: Intel Core2 Duo E8500 bits: 64 type: MCP arch: Penryn 
           family: 6 model-id: 17 (23) stepping: A (10) microcode: A0C cache: L2: 6 MiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 12634 
           Speed: 2597 MHz min/max: N/A Core speeds (MHz): 1: 2597 2: 2262 
           Vulnerabilities: Type: gather_data_sampling status: Not affected 
           Type: itlb_multihit status: KVM: Vulnerable 
           Type: l1tf mitigation: PTE Inversion 
           Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data status: Unknown: No mitigations 
           Type: retbleed status: Not affected 
           Type: spec_store_bypass status: Vulnerable 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 
           mitigation: Retpolines, STIBP: disabled, RSB filling, PBRSB-eIBRS: Not affected 
           Type: srbds status: Not affected 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel 82Q35 Express Integrated Graphics vendor: Dell OptiPlex 755 
           driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:29b2 class-ID: 0300 
           Display: x11 server: X.Org 1.20.4 compositor: xfwm4 v: 4.14.0 driver: loaded: intel 
           display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: VGA1 res: 1920x1080 hz: 60 dpi: 93 size: 527x296mm (20.7x11.7") 
           diag: 604mm (23.8") 
           OpenGL: renderer: Mesa DRI Intel Q35 v: 1.4 Mesa 18.3.6 direct render: Yes 
Audio:     Device-1: Intel 82801I HD Audio vendor: Dell Optiplex 755 driver: snd_hda_intel 
           v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403 
           Sound Server-1: ALSA v: k4.19.0-25-amd64 running: yes 
           Sound Server-2: PulseAudio v: 12.2 running: yes 
Network:   Device-1: Intel 82566DM-2 Gigabit Network vendor: Dell OptiPlex 755 driver: e1000e 
           v: 3.2.6-k port: ecc0 bus-ID: 00:19.0 chip-ID: 8086:10bd class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
           Device-2: Intel Wireless 8260 driver: iwlwifi v: kernel modules: wl port: ece0 
           bus-ID: 01:00.0 chip-ID: 8086:24f3 class-ID: 0280 
           IF: wlan0 state: up mac: <filter> 
Bluetooth: Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 4-1:2 chip-ID: 8087:0a2b 
           class-ID: e001 
           Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2 
           sub-v: 100 hci-v: 4.2 rev: 100 
           Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff 
           link-mode: slave accept service-classes: rendering, capturing 
Drives:    Local Storage: total: 326.74 GiB used: 51.32 GiB (15.7%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3320413AS size: 298.09 GiB 
           block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: HDD rpm: 7200 
           serial: <filter> rev: JC47 scheme: GPT 
           ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: Ultra Fit 
           size: 28.65 GiB block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> 
           rev: 1.00 scheme: MBR 
           SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
Partition: ID-1: / raw-size: 19.53 GiB size: 19.06 GiB (97.57%) used: 9.12 GiB (47.9%) fs: ext4 
           dev: /dev/sda1 maj-min: 8:1 
           ID-2: /home raw-size: 270.75 GiB size: 265.44 GiB (98.04%) used: 42.17 GiB (15.9%) 
           fs: ext4 dev: /dev/sda3 maj-min: 8:3 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 6 GiB used: 28.8 MiB (0.5%) priority: -2 
           dev: /dev/sda2 maj-min: 8:2 
Sensors:   System Temperatures: cpu: 42.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2178 lib: 1082 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list 
           1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ buster main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian buster-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian buster main contrib non-free
           2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://mirrors.rit.edu/mxlinux/mx-packages/mx/repo/ buster main non-free
           Active apt repos in: /etc/apt/sources.list.d/skype-stable.list 
           1: deb [arch=amd64] https://repo.skype.com/deb stable main
           No active apt repos in: /etc/apt/sources.list.d/various.list 
Info:      Processes: 223 Uptime: 30m wakeups: 1 Memory: 3.72 GiB used: 3.01 GiB (80.8%) 
           Init: SysVinit v: 2.93 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 8.3.0 
           alt: 8 Shell: quick-system-in default: Bash v: 5.0.3 running-in: quick-system-in 
           inxi: 3.3.06 

[CharlesV]

I've had this same issue trying to uninstall/reinstall Brave to get latest updated version.

Code: Select all

2023-09-27 17:35:28.410 WRN default: "W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repo.skype.com/deb stable InRelease: The following signatures were invalid: EXPKEYSIG 1F3045A5DF7587C3 Skype Linux Client Repository <se-um@microsoft.com>\nE: Repository 'https://brave-browser-apt-release.s3.brave.com buster InRelease' changed its 'Origin' value from '. buster' to 'Brave Software'\nE: Repository 'https://brave-browser-apt-release.s3.brave.com buster InRelease' changed its 'Label' value from '. buster' to 'Brave Browser'"

Worked on my Dell 6440, but not on Dell 755(info below). ?

You should try removing the brave repo in MX repo Manager, then update and try to do the install from the MX Package Installer. If that still fails, then possibly go to the brave website and follow their instructions.

[jonnken]

Thanks, a no go...will update via brave website.

[duane]

OK I see others are having the same problem.
I will wait for it to be resolved as well.

[MXRobo]

Just a note, but isn't post #17, if not accepted at the time, the probable cause of the issue,
and doesn't it appear as though post #22 was the solution if it wasn't accepted as in post # 17.

[duane]

The solution in MX 19 is to open the repo manager and go to individual sources and uncheck the Brave browser repo.
Then go to MX package installer and install Brave from there. This time it will find the right repository for Brave. It should install fine.
I am just confirming that what Charles V said worked for me in MX 19.