Code: Select all
System:
Kernel: 6.1.0-12-amd64 [6.1.52-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-12-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel, plank wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23_x64 Libretto July 31 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: LENOVO product: 4236V7L v: ThinkPad T420 serial: <superuser required>
Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 4236V7L serial: <superuser required> UEFI-[Legacy]: LENOVO
v: 83ET82WW (1.52 ) date: 06/04/2018
Battery:
ID-1: BAT0 charge: 16.7 Wh (100.0%) condition: 16.7/47.5 Wh (35.1%) volts: 12.4 min: 10.8
model: Panasonic 42T4763 type: Li-ion serial: <filter> status: full
CPU:
Info: model: Intel Core i5-2540M bits: 64 type: MT MCP arch: Sandy Bridge gen: core 2 level: v2
built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1962 high: 2401 min/max: 800/3300 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 1822 2: 2162 3: 1464 4: 2401 bogomips: 20732
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: Lenovo ThinkPad T420 driver: i915 v: kernel arch: Gen-6 code: Sandybridge
process: Intel 32nm built: 2011 ports: active: LVDS-1 empty: DP-1, DP-2, DP-3, HDMI-A-1,
HDMI-A-2, HDMI-A-3, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0126 class-ID: 0300
Device-2: Chicony integrated camera type: USB driver: uvcvideo bus-ID: 1-1.6:6
chip-ID: 04f2:b221 class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositors: 1: xfwm v: 4.18.0 2: Compton v: 1 driver:
X: loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.65x9.37") s-diag: 485mm (19.11")
Monitor-1: LVDS-1 model: LG Display 0x02e2 built: 2010 res: 1600x900 hz: 60 dpi: 131 gamma: 1.2
size: 310x174mm (12.2x6.85") diag: 355mm (14") ratio: 16:9 modes: 1600x900
API: OpenGL v: 3.3 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 3000 (SNB GT2)
direct-render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: Lenovo 6
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403
API: ALSA v: k6.1.0-12-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82579LM Gigabit Network vendor: Lenovo ThinkPad T520 driver: e1000e v: kernel
port: 5080 bus-ID: 00:19.0 chip-ID: 8086:1502 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi v: kernel modules: wl
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:0085 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Broadcom BCM2045B (BDC-2.1) type: USB driver: btusb v: 0.8 bus-ID: 1-1.4:5
chip-ID: 0a5c:217f class-ID: fe01 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 2.0 lmp-v: 3.0
sub-v: 4203 hci-v: 3.0 rev: 2ec
Info: acl-mtu: 1021:8 sco-mtu: 64:1 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, audio, telephony
Drives:
Local Storage: total: 238.47 GiB used: 20.21 GiB (8.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Silicon Power model: SPCC Solid State Disk size: 238.47 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 818B
scheme: MBR
Partition:
ID-1: / raw-size: 61.15 GiB size: 60.02 GiB (98.15%) used: 20.21 GiB (33.7%) fs: ext4
dev: /dev/sda5 maj-min: 8:5
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 53.0 C mobo: N/A
Fan Speeds (RPM): cpu: 3230
Repos:
Packages: pm: dpkg pkgs: 2198 libs: 1103 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://it.mxrepo.com/mx/repo/ bookworm main non-free
Info:
Processes: 229 Uptime: 22m wakeups: 2 Memory: 7.64 GiB used: 2.13 GiB (27.9%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12 Client: shell wrapper
v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)Prima di spegnere il pc chiudo i programmi ma ad ogni avvio li ritrovo attivi. salva la sessione al prossimo avvio "non è" selezionata.
