Non mi legge hdd esterni

Forum italiano degli utenti MX
Forum rules
Post Reply
Message
Author
maary79
Posts: 30
Joined: Tue Nov 20, 2018 5:49 am

Non mi legge hdd esterni

#1 Post by maary79 »

Non mi legge hdd esterni, lsusb vede il WD, gparted e fdisk no. Il pc in oggetto non ha mai avuto di questi problemi, MX è stato installato di recente, ma dal 2017 ha sempre avuto distribuzioni linux.

lsusb

Code: Select all

Bus 001 Device 006: ID 1058:1042 Western Digital Technologies, Inc. Elements SE Portable (WDBPCK)
Gparted non lo visualizza e neanche fdisk -l. E' un hdd esterno da 500 gb.

Gli altri 2 hdd da 1 tb ciascuno della Maxtor non vengono visti neanche da lsusb, si accende solo il led.

Le chiavette usb funzionano sono formattate in fat32, gli hdd esterni in ntfs.

Questo è dmesg

Code: Select all

[23337.156391] usb 1-5: new high-speed USB device number 5 using xhci_hcd
[23337.305328] usb 1-5: New USB device found, idVendor=1058, idProduct=1042, bcdDevice=10.16
[23337.305338] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[23337.305344] usb 1-5: Product: Elements 1042
[23337.305349] usb 1-5: Manufacturer: Western Digital
[23337.305354] usb 1-5: SerialNumber: 575846314536325A41503733
[23337.489875] usb 1-5: USB disconnect, device number 5
[23338.007120] usbcore: registered new interface driver usb-storage
[23338.019551] usbcore: registered new interface driver uas
[23385.791632] usb 1-6: new high-speed USB device number 6 using xhci_hcd
[23385.944670] usb 1-6: New USB device found, idVendor=1058, idProduct=1042, bcdDevice=10.16
[23385.944674] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[23385.944676] usb 1-6: Product: Elements 1042
[23385.944678] usb 1-6: Manufacturer: Western Digital
[23385.944679] usb 1-6: SerialNumber: 575846314536325A41503733
[23385.945771] usb-storage 1-6:1.0: USB Mass Storage device detected
[23385.945915] scsi host4: usb-storage 1-6:1.0
[23407.851523] usb 1-6: reset high-speed USB device number 6 using xhci_hcd
[23507.412836] usb 1-6: USB disconnect, device number 6
[23935.211688] usb 1-5: new high-speed USB device number 8 using xhci_hcd
[23935.364497] usb 1-5: New USB device found, idVendor=0781, idProduct=5575, bcdDevice= 1.27
[23935.364508] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[23935.364514] usb 1-5: Product: Cruzer Glide
[23935.364519] usb 1-5: Manufacturer: SanDisk
[23935.364523] usb 1-5: SerialNumber: 20051233910A61216F98
[23935.365770] usb-storage 1-5:1.0: USB Mass Storage device detected
[23935.366062] scsi host4: usb-storage 1-5:1.0
[23936.372698] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.27 PQ: 0 ANSI: 6
[23936.373252] sd 4:0:0:0: Attached scsi generic sg2 type 0
[23936.374517] sd 4:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[23936.376289] sd 4:0:0:0: [sdb] Write Protect is off
[23936.376300] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[23936.376610] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[23936.410137]  sdb: sdb1 sdb2
[23936.433765] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[24101.341153] ISO 9660 Extensions: Microsoft Joliet Level 3
[24101.343321] ISO 9660 Extensions: Microsoft Joliet Level 3
[24101.344602] ISO 9660 Extensions: RRIP_1991A
[24245.088206] usb 1-5: USB disconnect, device number 8
[24258.875214] usb 1-6: new high-speed USB device number 9 using xhci_hcd
[24259.024244] usb 1-6: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00
[24259.024255] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24259.024260] usb 1-6: Product:  SanDisk 3.2Gen1
[24259.024265] usb 1-6: Manufacturer:  USB
[24259.024270] usb 1-6: SerialNumber: 05010863687246c9f39fbedc799139f2f72db8fcb3589220b306591483d623db1fe600000000000000000000d43211c2ff95121091558107a4290745
[24259.026368] usb-storage 1-6:1.0: USB Mass Storage device detected
[24259.027899] scsi host4: usb-storage 1-6:1.0
[24260.048069] scsi 4:0:0:0: Direct-Access      USB      SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
[24260.048654] sd 4:0:0:0: Attached scsi generic sg2 type 0
[24260.048995] sd 4:0:0:0: [sdb] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB)
[24260.049680] sd 4:0:0:0: [sdb] Write Protect is off
[24260.049691] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[24260.050010] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[24260.086831]  sdb: sdb1
[24260.121265] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[24270.416023] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[24289.095631] usb 1-6: USB disconnect, device number 9
[24307.002536] usb 1-6: new high-speed USB device number 10 using xhci_hcd
[24307.151502] usb 1-6: New USB device found, idVendor=1058, idProduct=1042, bcdDevice=10.16
[24307.151512] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[24307.151519] usb 1-6: Product: Elements 1042
[24307.151523] usb 1-6: Manufacturer: Western Digital
[24307.151528] usb 1-6: SerialNumber: 575846314536325A41503733
[24307.152988] usb-storage 1-6:1.0: USB Mass Storage device detected
[24307.153395] scsi host4: usb-storage 1-6:1.0
[24328.926597] usb 1-6: reset high-speed USB device number 10 using xhci_hcd
[24422.719968] usb 1-6: USB disconnect, device number 10
Rileva solo il WD e dice che ho files corrotti? Ma i Maxtor che sembrano non esistere?

Poi ho collegato un hdd interno vecchio 5400 rpm con cavo adattatore sata-usb formattato in ext4 e viene visto, montato.

Ah, dimenticavo, tutti gli hdd esterni sulla tv vengono aperti e funzionano.
Top
User avatar
j2mcgreg
Global Moderator
Posts: 7131
Joined: Tue Oct 23, 2007 12:04 pm

Re: Non mi legge hdd esterni

#2 Post by j2mcgreg »

Abbiamo bisogno del profilo completo del tuo computer prima di poter procedere, quindi devi pubblicare l'output dall'utilità QSI. L'utilità Quick System Info (QSI) si trova in MX Tools e il suo output viene formattato automaticamente per l'uso qui nel forum. Esegui l'utilità QSI, fai clic su "Copia per forum" in basso e incollala qui nel thread.
Regole del forum
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.
Top
maary79
Posts: 30
Joined: Tue Nov 20, 2018 5:49 am

Re: Non mi legge hdd esterni

#3 Post by maary79 »

Eccolo:

Code: Select all

System:    Kernel: 5.10.0-25-amd64 [5.10.191-1] x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-25-amd64 root=UUID=<filter> ro 
           intremap=no_x2apic_optout pci=realloc 
           Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7 
           dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower January 15  2023 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Desktop Mobo: ASRock model: H110M-DVS R2.0 serial: <filter> 
           UEFI: American Megatrends v: P7.30 date: 12/14/2016 
CPU:       Info: Dual Core model: Intel Pentium G4600 bits: 64 type: MT MCP arch: Kaby Lake 
           family: 6 model-id: 9E (158) stepping: 9 microcode: F4 cache: L2: 3 MiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800 
           Speed: 800 MHz min/max: 800/3600 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 
           Vulnerabilities: Type: gather_data_sampling status: Not affected 
           Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable 
           Type: retbleed mitigation: IBRS 
           Type: spec_rstack_overflow status: Not affected 
           Type: spec_store_bypass 
           mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling, 
           PBRSB-eIBRS: Not affected 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel HD Graphics 630 vendor: ASRock driver: i915 v: kernel bus-ID: 00:02.0 
           chip-ID: 8086:5912 class-ID: 0300 
           Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver: 
           loaded: modesetting unloaded: fbdev,vesa display-ID: :0.0 screens: 1 
           Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") 
           s-diag: 582mm (22.9") 
           Monitor-1: HDMI-1 res: 1920x1080 hz: 60 dpi: 30 size: 1600x900mm (63.0x35.4") 
           diag: 1836mm (72.3") 
           OpenGL: renderer: Mesa Intel HD Graphics 630 (KBL GT2) v: 4.6 Mesa 20.3.5 
           direct render: Yes 
Audio:     Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: ASRock 
           driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a170 class-ID: 0403 
           Sound Server-1: ALSA v: k5.10.0-25-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASRock 
           driver: r8169 v: kernel port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200 
           IF: eth0 state: down mac: <filter> 
           Device-2: Realtek RTL8192CU 802.11n WLAN Adapter type: USB driver: rtl8192cu 
           bus-ID: 1-3:4 chip-ID: 0bda:8178 class-ID: 0000 serial: <filter> 
           IF: wlan0 state: up mac: <filter> 
Drives:    Local Storage: total: 931.51 GiB used: 711.46 GiB (76.4%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM010-2EP102 size: 931.51 GiB 
           block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 
           serial: <filter> rev: CC43 scheme: GPT 
Partition: ID-1: / raw-size: 40.98 GiB size: 40.04 GiB (97.71%) used: 11.74 GiB (29.3%) fs: ext4 
           dev: /dev/sda4 maj-min: 8:4 
           ID-2: /boot/efi raw-size: 100 MiB size: 98.4 MiB (98.45%) used: 9.5 MiB (9.6%) fs: vfat 
           dev: /dev/sda1 maj-min: 8:1 
           ID-3: /home raw-size: 890.43 GiB size: 875.38 GiB (98.31%) used: 699.71 GiB (79.9%) 
           fs: ext4 dev: /dev/sda3 maj-min: 8:3 
Swap:      Alert: No swap data was found. 
Sensors:   System Temperatures: cpu: 36.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Repos:     Packages: note: see --pkg apt: 2359 lib: 1266 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list 
           1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://it.mxrepo.com/mx/repo/ bullseye main non-free
Info:      Processes: 212 Uptime: 1h 7m wakeups: 1 Memory: 7.46 GiB used: 1.71 GiB (22.9%) 
           Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: N/A 
           alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06 
Boot Mode: UEFI
In realtà avevo risolto staccando il dongle wifi usb, mi ero dimenticata che ha questo problema che si presentava anche con altre distribuzioni. Sembra che le porte usb conflittino fra loro.
Top
User avatar
j2mcgreg
Global Moderator
Posts: 7131
Joined: Tue Oct 23, 2007 12:04 pm

Re: Non mi legge hdd esterni

#4 Post by j2mcgreg »

La tua mancanza di una partizione di swap è motivo di preoccupazione. Ci sono molte persone che sostengono l'idea che con abbastanza RAM disponibile si può rinunciare alla creazione di una partizione o di un file di swap, ma la realtà è che alcune applicazioni si aspettano ancora che sia lì (anche se potrebbe non essere mai utilizzata) e può dare risultati imprevedibili. risultati quando lo spazio di swap non è presente. La buona notizia è che puoi aggiungere un file di scambio in qualsiasi momento ed ecco come:

https://www.digitalocean.com/community/ ... -debian-11
​Look up details
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.
Top
maary79
Posts: 30
Joined: Tue Nov 20, 2018 5:49 am

Re: Non mi legge hdd esterni

#5 Post by maary79 »

In realtà mi ero dimenticata che questo pc ha sempre dato un problema, un conflitto tra periferiche usb. Se stacco il dongle wifi riconosce tutte le chiavette e hdd esterni. Appena ho tempo faccio la swap. Grazie.
Top
User avatar
j2mcgreg
Global Moderator
Posts: 7131
Joined: Tue Oct 23, 2007 12:04 pm

Re: Non mi legge hdd esterni

#6 Post by j2mcgreg »

maary79 wrote: Sat Nov 11, 2023 8:34 am In realtà mi ero dimenticata che questo pc ha sempre dato un problema, un conflitto tra periferiche usb. Se stacco il dongle wifi riconosce tutte le chiavette e hdd esterni. Appena ho tempo faccio la swap. Grazie.
In tal caso, il tuo dongle WiFi è difettoso --> sostituiscilo con uno sicuramente funzionante; -- oppure-- Non c'è abbastanza energia nel bus USB per far funzionare tutti i tuoi dispositivi --> acquista un hub USB alimentato
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.
Top
maary79
Posts: 30
Joined: Tue Nov 20, 2018 5:49 am

Re: Non mi legge hdd esterni

#7 Post by maary79 »

j2mcgreg wrote: Sat Nov 11, 2023 8:45 am
maary79 wrote: Sat Nov 11, 2023 8:34 am In realtà mi ero dimenticata che questo pc ha sempre dato un problema, un conflitto tra periferiche usb. Se stacco il dongle wifi riconosce tutte le chiavette e hdd esterni. Appena ho tempo faccio la swap. Grazie.
In tal caso, il tuo dongle WiFi è difettoso --> sostituiscilo con uno sicuramente funzionante; -- oppure-- Non c'è abbastanza energia nel bus USB per far funzionare tutti i tuoi dispositivi --> acquista un hub USB alimentato
Di dongle ne ho 2 e lo fa con entrambi. Potrebbe essere la seconda che hai detto. Non ci avevo mai pensato. Grazie.
Top
Post Reply

Return to “Forum Italiano”