Conflicting error window when running USBVIEW [Solved]

[linuxbeliever]

Hi! Everybody

When I try to run USBVIEW on my MX 21.3, from the menu it display a conflicting error window, see below please for more info. I tried to compile a new version from the developer main site ( running ./configure, make , sudo make install) in the source folder, but it did not change the version on my MX 21.3. The MX 21.3 version is 2.0-21-g6fe2f4f-2+deb11u1 and the developers is usbview-3.0. I will attach screenshots of the error running from shortcut menu and terminal, and also system info of my PC. Can you help me at least compile the developers version, please? Thanks for the time and help in advance.

USBVIEW on MX 21.3 error.png

Terminal USBVIEW on MX 21.3 error.png

ABOUT on USBVIEW on MX 21.3.PNG

System: Kernel: 6.0.0-5mx-amd64 [6.0.10-2~mx21+1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/vmlinuz-6.0.0-5mx-amd64 root=UUID=<filter> ro quiet splash
vm.swappiness=1 resume=UUID=<filter>
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_ahs_x64 Wildflower November 22 2021
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Desktop System: ASUS product: N/A v: N/A serial: <filter>
Mobo: ASUSTeK model: PRIME B550-PLUS v: Rev X.0x serial: <filter>
UEFI: American Megatrends v: 2803 date: 04/27/2022
CPU: Info: 8-Core model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3 family: 19 (25)
model-id: 21 (33) stepping: 0 microcode: A201016 cache: L2: 4 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 134401
Speed: 2200 MHz min/max: 2200/4200 MHz boost: disabled Core speeds (MHz): 1: 2200
2: 4200 3: 2200 4: 4199 5: 4200 6: 4200 7: 2200 8: 2200 9: 4199 10: 2200 11: 2200
12: 4200 13: 2200 14: 2200 15: 2200 16: 2200
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: always-on,
RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: NVIDIA TU116 [GeForce GTX 1660 Ti] vendor: eVga.com. driver: nvidia
v: 520.56.06 bus-ID: 3b:00.0 chip-ID: 10de:2182 class-ID: 0300
Device-2: Microdia Webcam Vitade AF type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-1:2 chip-ID: 0c45:6366 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org 1.20.14 compositor: xfwm4 v: 4.18.0 driver: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa alternate: nv display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1280x720 s-dpi: 96 s-size: 339x191mm (13.3x7.5")
s-diag: 389mm (15.3")
Monitor-1: DP-0 res: 1280x720 hz: 60 dpi: 54 size: 600x330mm (23.6x13.0")
diag: 685mm (27")
OpenGL: renderer: NVIDIA GeForce GTX 1660 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 520.56.06
direct render: Yes
Audio: Device-1: NVIDIA TU116 High Definition Audio vendor: eVga.com. driver: snd_hda_intel
v: kernel bus-ID: 3b:00.1 chip-ID: 10de:1aeb class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus-ID: 3d:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Microdia Webcam Vitade AF type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 1-1:2 chip-ID: 0c45:6366 class-ID: 0102 serial: <filter>
Sound Server-1: ALSA v: k6.0.0-5mx-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel port: f000 bus-ID: 3a:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 931.52 GiB used: 38.1 GiB (4.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Sabrent model: Rocket 4.0 500GB
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4
type: SSD serial: <filter> rev: RKT401.3 temp: 26.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Sabrent model: Rocket 4.0 500GB
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4
type: SSD serial: <filter> rev: RKT401.3 temp: 27.9 C scheme: GPT
Partition: ID-1: / raw-size: 456.99 GiB size: 448.75 GiB (98.20%) used: 37.89 GiB (8.4%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: root.fsm
ID-2: /boot raw-size: 512 MiB size: 487.2 MiB (95.16%) used: 214.1 MiB (44.0%) fs: ext4
dev: /dev/nvme1n1p2 maj-min: 259:4
ID-3: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 411 KiB (0.2%) fs: vfat
dev: /dev/nvme1n1p1 maj-min: 259:3
Swap: Kernel: swappiness: 1 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 7.98 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/dm-1 maj-min: 253:1 mapped: swap
Sensors: Message: No sensor data found. Is lm-sensors configured?
Repos: Packages: note: see --pkg apt: 2438 lib: 1246 flatpak: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://security.debian.org/debian-security/ bullseye-security non-free contrib main
2: deb http://deb.debian.org/debian/ bullseye main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.osuosl.org/pub/mxlinux/mx/repo/ bullseye main non-free
2: deb http://ftp.osuosl.org/pub/mxlinux/mx/repo/ bullseye ahs
No active apt repos in: /etc/apt/sources.list.d/steam.list
Info: Processes: 340 Uptime: 24m wakeups: 1 Memory: 31.26 GiB used: 2.06 GiB (6.6%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: 10.2.1
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI

[CharlesV]

Doing a search leads me to this post which although pretty old also says that USBView uses the depreciated usbfs ... so someone else may have insight into this, but it looks like its no longer supported.

viewtopic.php?p=463531#p463531

but USBView is still in the repos... so??

Two side notes:
1) if you use the QSI "post to forum" button, it will wrap your QSI in code quotes, ( also fifth button in the editing window above) and will make it much easier for people to read.

2) I see your running the 6.0.x kernel which is known to be quirky, you might consider upgrading to 6.1 or 6.2. (6.1 is LTS.)

[timkb4cq]

I'll see if I can backport the 3.0 version from debian bookworm.

[timkb4cq]

usbview_3.0-3~mx21 has now been uploaded to the MX-21 Test repository.
If you would like to try it before your mirror catches up, the deb is here:
https://teharris.net/mx/testrepo/pool/t ... _amd64.deb

[linuxbeliever]

Hi! timkb4cq and CharlesV

Thanks for your replies, I can confirm timkb4cq version of USBVIEW is working 100% in my MX 21.3. See below for screenshot. A million thanks to timkb4cq YOU ARE AWESOME SIR! Thanks for your time and help. Have a nice day.

USBVIEW running on MX 21.3.png

[FullScale4Me]

It also works on MX 23 Beta 2 Xfce.