Installing Snapshot always fails with "failed to set user account password" error

Message

#31 Post by **fehlix** » Sun Mar 13, 2022 6:58 pm

@SIttner76 , I'd probaly now try again with leaving password empty for the user to be installed. It may (or not) go through another part, where chpasswd might not be involved. At least it may give us a clue (or not)...

#32 Post by **dolphin_oracle** » Sun Mar 13, 2022 7:02 pm

demo should bre present on the live system. its changed by installer after it copy to the drive.

maybe a peak at the /etc/passwd file would be good. (despite its name, it does not store passwords).

#33 Post by **SIttner76** » Mon Mar 14, 2022 4:01 am

dolphin_oracle wrote: Sun Mar 13, 2022 7:02 pm maybe a peak at the /etc/passwd file would be good. (despite its name, it does not store passwords).

Here it is:

Code: Select all

root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin
bin:x:2:2:bin:/bin:/usr/sbin/nologin
sys:x:3:3:sys:/dev:/usr/sbin/nologin
sync:x:4:65534:sync:/bin:/bin/sync
games:x:5:60:games:/usr/games:/usr/sbin/nologin
man:x:6:12:man:/var/cache/man:/usr/sbin/nologin
lp:x:7:7:lp:/var/spool/lpd:/usr/sbin/nologin
mail:x:8:8:mail:/var/mail:/usr/sbin/nologin
news:x:9:9:news:/var/spool/news:/usr/sbin/nologin
uucp:x:10:10:uucp:/var/spool/uucp:/usr/sbin/nologin
proxy:x:13:13:proxy:/bin:/usr/sbin/nologin
www-data:x:33:33:www-data:/var/www:/usr/sbin/nologin
backup:x:34:34:backup:/var/backups:/usr/sbin/nologin
list:x:38:38:Mailing List Manager:/var/list:/usr/sbin/nologin
irc:x:39:39:ircd:/run/ircd:/usr/sbin/nologin
gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/usr/sbin/nologin
nobody:x:65534:65534:nobody:/nonexistent:/usr/sbin/nologin
_apt:x:100:65534::/nonexistent:/usr/sbin/nologin
systemd-timesync:x:101:101:systemd Time Synchronization,,,:/run/systemd:/usr/sbin/nologin
systemd-network:x:102:103:systemd Network Management,,,:/run/systemd:/usr/sbin/nologin
systemd-resolve:x:103:104:systemd Resolver,,,:/run/systemd:/usr/sbin/nologin
tss:x:104:112:TPM software stack,,,:/var/lib/tpm:/bin/false
messagebus:x:105:113::/nonexistent:/usr/sbin/nologin
ntpsec:x:106:114::/nonexistent:/usr/sbin/nologin
_rpc:x:107:65534::/run/rpcbind:/usr/sbin/nologin
usbmux:x:108:46:usbmux daemon,,,:/var/lib/usbmux:/usr/sbin/nologin
dnsmasq:x:109:65534:dnsmasq,,,:/var/lib/misc:/usr/sbin/nologin
statd:x:110:65534::/var/lib/nfs:/usr/sbin/nologin
avahi:x:111:119:Avahi mDNS daemon,,,:/run/avahi-daemon:/usr/sbin/nologin
saned:x:112:121::/var/lib/saned:/usr/sbin/nologin
nm-openvpn:x:113:122:NetworkManager OpenVPN,,,:/var/lib/openvpn/chroot:/usr/sbin/nologin
hplip:x:114:7:HPLIP system user,,,:/run/hplip:/bin/false
colord:x:115:123:colord colour management daemon,,,:/var/lib/colord:/usr/sbin/nologin
nm-openconnect:x:116:124:NetworkManager OpenConnect plugin,,,:/var/lib/NetworkManager:/usr/sbin/nologin
pulse:x:117:125:PulseAudio daemon,,,:/run/pulse:/usr/sbin/nologin
_flatpak:x:118:127:Flatpak system-wide installation helper,,,:/nonexistent:/usr/sbin/nologin
sddm:x:119:129:Simple Desktop Display Manager:/var/lib/sddm:/bin/false
stefan:x:1000:1000::/home/stefan:/bin/bash
systemd-coredump:x:999:999:systemd Core Dumper:/:/usr/sbin/nologin

"stefan" is the username from the installation where I created the snapshot

#34 Post by **SIttner76** » Mon Mar 14, 2022 4:09 am

fehlix wrote: Sun Mar 13, 2022 6:58 pm @SIttner76 , I'd probaly now try again with leaving password empty for the user to be installed. It may (or not) go through another part, where chpasswd might not be involved. At least it may give us a clue (or not)...

The error message changes somewhat, but the installation fails with the same error. Here's the log:

Code: Select all

2022-03-14 09:02:08.824 DBG default: Installer version: 22.3.05
2022-03-14 09:02:09.102 DBG default: << void MInstall::startup() >>
2022-03-14 09:02:09.103 DBG default: check for remastered home demo folder: false
2022-03-14 09:02:09.103 DBG default: Exec #1: du -sb /live/aufs/boot
2022-03-14 09:02:09.141 DBG default: Exit #1: 0 QProcess::NormalExit
2022-03-14 09:02:09.141 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2022-03-14 09:02:09.141 DBG default: Bash #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2022-03-14 09:02:09.149 DBG default: Exit #2: 0 QProcess::NormalExit
2022-03-14 09:02:09.149 DBG default: linuxfs compression type is  "5" compression factor is  42
2022-03-14 09:02:09.149 DBG default: Bash #3: df /live/linux --output=used --total |tail -n1
2022-03-14 09:02:09.154 DBG default: Exit #3: 0 QProcess::NormalExit
2022-03-14 09:02:09.154 DBG default: linuxfs file size is  16338124800  rootfs file size is  0
2022-03-14 09:02:09.154 DBG default: Minimum space: 671088640 (boot), 17411866624 (root)
2022-03-14 09:02:09.154 DBG default: Bash #4: uname -m | grep -q i686
2022-03-14 09:02:09.160 DBG default: Exit #4: 1 QProcess::NormalExit
2022-03-14 09:02:09.160 DBG default: uefi = true
2022-03-14 09:02:09.160 DBG default: << void MInstall::setupAutoMount(bool) >>
2022-03-14 09:02:09.160 DBG default: Bash #5: ps -e | grep 'udisksd'
2022-03-14 09:02:09.177 DBG default: SOut #5: "  14602 ?        00:00:00 udisksd\n"
2022-03-14 09:02:09.177 DBG default: Exit #5: 0 QProcess::NormalExit
2022-03-14 09:02:09.177 DBG default: Bash #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2022-03-14 09:02:09.193 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2022-03-14 09:02:09.193 DBG default: Exit #6: 2 QProcess::NormalExit
2022-03-14 09:02:09.193 DBG default: Bash #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2022-03-14 09:02:09.230 DBG default: Exit #7: 1 QProcess::NormalExit
2022-03-14 09:02:09.231 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2022-03-14 09:02:09.232 DBG default: Bash #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2022-03-14 09:02:09.238 DBG default: Exit #8: 0 QProcess::NormalExit
2022-03-14 09:02:09.238 DBG default: Exec #9: udevadm control --reload
2022-03-14 09:02:09.243 DBG default: Exit #9: 0 QProcess::NormalExit
2022-03-14 09:02:09.243 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2022-03-14 09:02:09.250 DBG default: Exit #10: 0 QProcess::NormalExit
2022-03-14 09:02:09.250 DBG default: Bash #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2022-03-14 09:02:09.255 DBG default: Exit #11: 1 QProcess::NormalExit
2022-03-14 09:02:09.255 DBG default: check for possible snapshot: false
2022-03-14 09:02:09.298 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2022-03-14 09:02:09.305 DBG default: Exit #12: 0 QProcess::NormalExit
2022-03-14 09:02:09.306 DBG default: Bash #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2022-03-14 09:02:09.318 DBG default: Exit #13: 0 QProcess::NormalExit
2022-03-14 09:02:09.318 DBG default: Bash #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2022-03-14 09:02:09.463 DBG default: Exit #14: 1 QProcess::NormalExit
2022-03-14 09:02:09.463 DBG default: Bash #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2022-03-14 09:02:09.497 DBG default: Exit #15: 0 QProcess::NormalExit
2022-03-14 09:02:09.500 DBG default: << void MInstall::updatePartitionWidgets(bool) >>
2022-03-14 09:02:09.500 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2022-03-14 09:02:09.507 DBG default: Exit #16: 0 QProcess::NormalExit
2022-03-14 09:02:09.507 DBG default: Exec #17: partprobe -s
2022-03-14 09:02:09.753 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2\n/dev/sdb: msdos partitions 1 2\n/dev/nvme0n1: gpt partitions 1 2 3 4\n/dev/nvme1n1: gpt partitions 1 2 3 4 5\n"
2022-03-14 09:02:09.753 DBG default: Exit #17: 0 QProcess::NormalExit
2022-03-14 09:02:09.753 DBG default: Exec #18: blkid -c /dev/null
2022-03-14 09:02:09.803 DBG default: SOut #18: "/dev/nvme1n1p1: UUID=\"3877-C1A9\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"EFI system partition\" PARTUUID=\"0f114bbc-7e46-4852-8ac4-8dfd74307603\"\n/dev/nvme1n1p2: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"016ed921-2b50-4489-849b-1f41d9ade57c\"\n/dev/nvme1n1p3: LABEL=\"Windows\" BLOCK_SIZE=\"512\" UUID=\"0CC49576C495632E\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"c13f6a51-782d-4b0d-bf9b-e9dacd17f35d\"\n/dev/nvme1n1p4: BLOCK_SIZE=\"512\" UUID=\"7808E41708E3D1E4\" TYPE=\"ntfs\" PARTUUID=\"a5b87984-177f-487b-8a41-1ca6676bb060\"\n/dev/nvme1n1p5: LABEL=\"Data\" BLOCK_SIZE=\"512\" UUID=\"54549B66549B499E\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"21be4eeb-7138-4e38-a9cf-6828aa99d261\"\n/dev/nvme0n1p1: LABEL_FATBOOT=\"NO_LABEL\" LABEL=\"NO_LABEL\" UUID=\"8A53-E83A\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"7b563034-fede-264d-bcd5-ba7cf089ab74\"\n/dev/nvme0n1p2: LABEL=\"rootMX21\" UUID=\"2167d296-d419-49ff-af73-1167e8425586\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"33f000aa-ed70-7749-8c84-f5e9761b7426\"\n/dev/nvme0n1p3: LABEL=\"MX-Data\" UUID=\"ff36287c-151a-4f57-a891-c65e6aad0197\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"03738d24-7b5d-bc43-bc8e-25a8ed73b874\"\n/dev/nvme0n1p4: LABEL=\"swapMX\" UUID=\"9946635c-940d-46f5-a19e-4f2134214cac\" TYPE=\"swap\" PARTUUID=\"3d3f9ece-35f0-1741-8c5e-fc553df24777\"\n/dev/sda1: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"9dc9f4f4-c688-4a86-9e63-fc4d8dbd7443\"\n/dev/sda2: LABEL=\"Toshiba\" BLOCK_SIZE=\"512\" UUID=\"64D057DFD057B5D0\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"0170fa1b-1991-4c8c-b738-3502696b8309\"\n/dev/sdb1: LABEL=\"Live-usb\" UUID=\"6c15101b-42ee-46f7-8225-daad580c1627\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"ce5525ba-01\"\n/dev/sdb2: LABEL_FATBOOT=\"LIVE-UEFI\" LABEL=\"LIVE-UEFI\" UUID=\"2A32-6AA5\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"ce5525ba-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2022-03-14 09:02:09.803 DBG default: Exit #18: 0 QProcess::NormalExit
2022-03-14 09:02:09.804 DBG default: Exec #19: parted -lm
2022-03-14 09:02:09.877 DBG default: Exit #19: 0 QProcess::NormalExit
2022-03-14 09:02:09.877 DBG default: Bash #20: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/*
2022-03-14 09:02:09.882 DBG default: SErr #20: "lsblk: /dev/mapper/control: not a block device\n"
2022-03-14 09:02:09.882 DBG default: Exit #20: 32 QProcess::NormalExit
2022-03-14 09:03:12.637 DBG default: Mount points:
2022-03-14 09:03:12.637 DBG default:  - "/" - "nvme0n1p2" "" "/dev/nvme0n1p2"
2022-03-14 09:03:12.637 DBG default:  - "SWAP" - "nvme0n1p4" "" "/dev/nvme0n1p4"
2022-03-14 09:03:14.182 DBG default: << bool MInstall::saveHomeBasic() >>
2022-03-14 09:03:14.231 DBG default: ++ Preparing to install MX Linux ++
2022-03-14 09:03:14.235 DBG default: Exec #21: smartctl -H /dev/sda
2022-03-14 09:03:14.271 DBG default: SOut #21: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2022-03-14 09:03:14.272 DBG default: Exit #21: 0 QProcess::NormalExit
2022-03-14 09:03:14.272 DBG default: Bash #22: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2022-03-14 09:03:14.296 DBG default: Exit #22: 0 QProcess::NormalExit
2022-03-14 09:03:14.296 DBG default: Exec #23: smartctl -H /dev/sdb
2022-03-14 09:03:14.311 DBG default: SOut #23: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n/dev/sdb: Unknown USB bridge [0x8564:0x1000 (0x100)]\nPlease specify device type with the -d option.\n\nUse smartctl -h to get a usage summary\n\n"
2022-03-14 09:03:14.311 DBG default: Exit #23: 1 QProcess::NormalExit
2022-03-14 09:03:14.311 DBG default: Bash #24: smartctl -A /dev/sdb| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2022-03-14 09:03:14.326 DBG default: Exit #24: 0 QProcess::NormalExit
2022-03-14 09:03:14.326 DBG default: Exec #25: smartctl -H /dev/nvme1n1
2022-03-14 09:03:14.344 DBG default: SOut #25: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2022-03-14 09:03:14.344 DBG default: Exit #25: 0 QProcess::NormalExit
2022-03-14 09:03:14.344 DBG default: Bash #26: smartctl -A /dev/nvme1n1| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2022-03-14 09:03:14.366 DBG default: Exit #26: 0 QProcess::NormalExit
2022-03-14 09:03:14.366 DBG default: Exec #27: smartctl -H /dev/nvme0n1
2022-03-14 09:03:14.388 DBG default: SOut #27: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2022-03-14 09:03:14.388 DBG default: Exit #27: 0 QProcess::NormalExit
2022-03-14 09:03:14.388 DBG default: Bash #28: smartctl -A /dev/nvme0n1| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2022-03-14 09:03:14.412 DBG default: Exit #28: 0 QProcess::NormalExit
2022-03-14 09:03:14.412 DBG default: << void MInstall::cleanup(bool) >>
2022-03-14 09:03:14.412 DBG default: Exec #29: /bin/umount -l /mnt/antiX/boot/efi
2022-03-14 09:03:14.421 DBG default: SErr #29: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2022-03-14 09:03:14.421 DBG default: Exit #29: 32 QProcess::NormalExit
2022-03-14 09:03:14.421 DBG default: Exec #30: /bin/umount -l /mnt/antiX/proc
2022-03-14 09:03:14.425 DBG default: SErr #30: "umount: /mnt/antiX/proc: no mount point specified.\n"
2022-03-14 09:03:14.425 DBG default: Exit #30: 32 QProcess::NormalExit
2022-03-14 09:03:14.425 DBG default: Exec #31: /bin/umount -l /mnt/antiX/sys
2022-03-14 09:03:14.430 DBG default: SErr #31: "umount: /mnt/antiX/sys: no mount point specified.\n"
2022-03-14 09:03:14.430 DBG default: Exit #31: 32 QProcess::NormalExit
2022-03-14 09:03:14.430 DBG default: Exec #32: /bin/umount -l /mnt/antiX/dev/shm
2022-03-14 09:03:14.434 DBG default: SErr #32: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2022-03-14 09:03:14.434 DBG default: Exit #32: 32 QProcess::NormalExit
2022-03-14 09:03:14.434 DBG default: Exec #33: /bin/umount -l /mnt/antiX/dev
2022-03-14 09:03:14.439 DBG default: SErr #33: "umount: /mnt/antiX/dev: no mount point specified.\n"
2022-03-14 09:03:14.439 DBG default: Exit #33: 32 QProcess::NormalExit
2022-03-14 09:03:14.439 DBG default: Exec #34: swapoff /dev/nvme0n1p4
2022-03-14 09:03:14.450 DBG default: Exit #34: 0 QProcess::NormalExit
2022-03-14 09:03:14.450 DBG default: Exec #35: /bin/umount -l /mnt/antiX/
2022-03-14 09:03:14.456 DBG default: SErr #35: "umount: /mnt/antiX/: no mount point specified.\n"
2022-03-14 09:03:14.456 DBG default: Exit #35: 32 QProcess::NormalExit
2022-03-14 09:03:14.456 DBG default: << bool PartMan::preparePartitions() >>
2022-03-14 09:03:14.456 DBG default: Exec #36: swapoff sdb2
2022-03-14 09:03:14.460 DBG default: SErr #36: "swapoff: sdb2: swapoff failed: No such file or directory\n"
2022-03-14 09:03:14.460 DBG default: Exit #36: 4 QProcess::NormalExit
2022-03-14 09:03:14.461 DBG default: Exec #37: /bin/umount sdb2
2022-03-14 09:03:14.466 DBG default: SErr #37: "umount: sdb2: no mount point specified.\n"
2022-03-14 09:03:14.466 DBG default: Exit #37: 32 QProcess::NormalExit
2022-03-14 09:03:14.466 DBG default: Exec #38: swapoff nvme0n1p1
2022-03-14 09:03:14.470 DBG default: SErr #38: "swapoff: nvme0n1p1: swapoff failed: No such file or directory\n"
2022-03-14 09:03:14.470 DBG default: Exit #38: 4 QProcess::NormalExit
2022-03-14 09:03:14.470 DBG default: Exec #39: /bin/umount nvme0n1p1
2022-03-14 09:03:14.475 DBG default: SErr #39: "umount: nvme0n1p1: no mount point specified.\n"
2022-03-14 09:03:14.475 DBG default: Exit #39: 32 QProcess::NormalExit
2022-03-14 09:03:14.475 DBG default: Exec #40: swapoff nvme0n1p2
2022-03-14 09:03:14.482 DBG default: SErr #40: "swapoff: nvme0n1p2: swapoff failed: No such file or directory\n"
2022-03-14 09:03:14.482 DBG default: Exit #40: 4 QProcess::NormalExit
2022-03-14 09:03:14.482 DBG default: Exec #41: /bin/umount nvme0n1p2
2022-03-14 09:03:14.487 DBG default: SErr #41: "umount: nvme0n1p2: no mount point specified.\n"
2022-03-14 09:03:14.487 DBG default: Exit #41: 32 QProcess::NormalExit
2022-03-14 09:03:14.487 DBG default: Exec #42: swapoff nvme0n1p4
2022-03-14 09:03:14.491 DBG default: SErr #42: "swapoff: nvme0n1p4: swapoff failed: No such file or directory\n"
2022-03-14 09:03:14.491 DBG default: Exit #42: 4 QProcess::NormalExit
2022-03-14 09:03:14.491 DBG default: Exec #43: /bin/umount nvme0n1p4
2022-03-14 09:03:14.497 DBG default: SErr #43: "umount: nvme0n1p4: no mount point specified.\n"
2022-03-14 09:03:14.497 DBG default: Exit #43: 32 QProcess::NormalExit
2022-03-14 09:03:14.497 DBG default: ++ Preparing required partitions ++
2022-03-14 09:03:14.499 DBG default: Bash #44: /sbin/sfdisk /dev/sdb --part-type 2 ef
2022-03-14 09:03:14.775 DBG default: SOut #44: "\nThe partition table has been altered.\nCalling ioctl() to re-read partition table.\nThe kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or partx(8).\nSyncing disks.\n"
2022-03-14 09:03:14.775 DBG default: SErr #44: "Re-reading the partition table failed.: Device or resource busy\n"
2022-03-14 09:03:14.775 DBG default: Exit #44: 0 QProcess::NormalExit
2022-03-14 09:03:14.776 DBG default: Bash #45: /sbin/sgdisk /dev/nvme0n1 --typecode=1:ef00
2022-03-14 09:03:15.803 DBG default: SOut #45: "The operation has completed successfully.\n"
2022-03-14 09:03:15.803 DBG default: Exit #45: 0 QProcess::NormalExit
2022-03-14 09:03:15.805 DBG default: Bash #46: /sbin/sgdisk /dev/nvme0n1 --typecode=2:8303
2022-03-14 09:03:16.822 DBG default: SOut #46: "The operation has completed successfully.\n"
2022-03-14 09:03:16.822 DBG default: Exit #46: 0 QProcess::NormalExit
2022-03-14 09:03:16.823 DBG default: Bash #47: /sbin/sgdisk /dev/nvme0n1 --typecode=4:8303
2022-03-14 09:03:17.843 DBG default: SOut #47: "The operation has completed successfully.\n"
2022-03-14 09:03:17.843 DBG default: Exit #47: 0 QProcess::NormalExit
2022-03-14 09:03:17.845 DBG default: Exec #48: partprobe -s
2022-03-14 09:03:18.108 DBG default: SOut #48: "/dev/sda: gpt partitions 1 2\n/dev/sdb: msdos partitions 1 2\n/dev/nvme0n1: gpt partitions 1 2 3 4\n/dev/nvme1n1: gpt partitions 1 2 3 4 5\n"
2022-03-14 09:03:18.108 DBG default: Exit #48: 0 QProcess::NormalExit
2022-03-14 09:03:18.108 DBG default: << bool PartMan::formatPartitions() >>
2022-03-14 09:03:18.108 DBG default: ++ Formatting: / (root) ++
2022-03-14 09:03:18.111 DBG default: Exec #49: mkfs.ext4 -F /dev/nvme0n1p2 -L rootMX21
2022-03-14 09:03:18.459 DBG default: SOut #49: "Discarding device blocks:     4096/26534912\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b                 \b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 26534912 4k blocks and 6635520 inodes\nFilesystem UUID: ed7b0808-c417-4a76-b9ec-23f9b1781a78\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, \n\t4096000, 7962624, 11239424, 20480000, 23887872\n\nAllocating group tables:   0/810\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nWriting inode tables:   0/810\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nCreating journal (131072 blocks): done\nWriting superblocks and filesystem accounting information:   0/810\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone\n\n"
2022-03-14 09:03:18.459 DBG default: SErr #49: "mke2fs 1.46.2 (28-Feb-2021)\n"
2022-03-14 09:03:18.459 DBG default: Exit #49: 0 QProcess::NormalExit
2022-03-14 09:03:18.459 DBG default: Exec #50: /sbin/tune2fs -c0 -C0 -i1m /dev/nvme0n1p2
2022-03-14 09:03:18.471 DBG default: SOut #50: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2022-03-14 09:03:18.472 DBG default: Exit #50: 0 QProcess::NormalExit
2022-03-14 09:03:18.472 DBG default: << bool PartMan::mountPartitions() >>
2022-03-14 09:03:18.472 DBG default: ++ Mounting: /dev/nvme0n1p2 ++
2022-03-14 09:03:18.477 DBG default: MkPath(SUCCESS): "/mnt/antiX/"
2022-03-14 09:03:18.477 DBG default: Exec #51: /bin/mount /dev/nvme0n1p2 /mnt/antiX/ -o discard,noatime
2022-03-14 09:03:18.496 DBG default: Exit #51: 0 QProcess::NormalExit
2022-03-14 09:03:18.496 DBG default: Exec #52: blkid -c /dev/null
2022-03-14 09:03:18.555 DBG default: SOut #52: "/dev/nvme1n1p1: UUID=\"3877-C1A9\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"EFI system partition\" PARTUUID=\"0f114bbc-7e46-4852-8ac4-8dfd74307603\"\n/dev/nvme1n1p2: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"016ed921-2b50-4489-849b-1f41d9ade57c\"\n/dev/nvme1n1p3: LABEL=\"Windows\" BLOCK_SIZE=\"512\" UUID=\"0CC49576C495632E\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"c13f6a51-782d-4b0d-bf9b-e9dacd17f35d\"\n/dev/nvme1n1p4: BLOCK_SIZE=\"512\" UUID=\"7808E41708E3D1E4\" TYPE=\"ntfs\" PARTUUID=\"a5b87984-177f-487b-8a41-1ca6676bb060\"\n/dev/nvme1n1p5: LABEL=\"Data\" BLOCK_SIZE=\"512\" UUID=\"54549B66549B499E\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"21be4eeb-7138-4e38-a9cf-6828aa99d261\"\n/dev/nvme0n1p1: LABEL_FATBOOT=\"NO_LABEL\" LABEL=\"NO_LABEL\" UUID=\"8A53-E83A\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"7b563034-fede-264d-bcd5-ba7cf089ab74\"\n/dev/nvme0n1p2: LABEL=\"rootMX21\" UUID=\"ed7b0808-c417-4a76-b9ec-23f9b1781a78\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"33f000aa-ed70-7749-8c84-f5e9761b7426\"\n/dev/nvme0n1p3: LABEL=\"MX-Data\" UUID=\"ff36287c-151a-4f57-a891-c65e6aad0197\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"03738d24-7b5d-bc43-bc8e-25a8ed73b874\"\n/dev/nvme0n1p4: LABEL=\"swapMX\" UUID=\"9946635c-940d-46f5-a19e-4f2134214cac\" TYPE=\"swap\" PARTUUID=\"3d3f9ece-35f0-1741-8c5e-fc553df24777\"\n/dev/sda1: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"9dc9f4f4-c688-4a86-9e63-fc4d8dbd7443\"\n/dev/sda2: LABEL=\"Toshiba\" BLOCK_SIZE=\"512\" UUID=\"64D057DFD057B5D0\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"0170fa1b-1991-4c8c-b738-3502696b8309\"\n/dev/sdb1: LABEL=\"Live-usb\" UUID=\"6c15101b-42ee-46f7-8225-daad580c1627\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"ce5525ba-01\"\n/dev/sdb2: LABEL_FATBOOT=\"LIVE-UEFI\" LABEL=\"LIVE-UEFI\" UUID=\"2A32-6AA5\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"ce5525ba-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2022-03-14 09:03:18.555 DBG default: Exit #52: 0 QProcess::NormalExit
2022-03-14 09:03:18.555 DBG default: << bool MInstall::installLinux() >>
2022-03-14 09:03:18.555 DBG default: ++ Creating system directories ++
2022-03-14 09:03:18.561 DBG default: << void MInstall::setupAutoMount(bool) >>
2022-03-14 09:03:18.561 DBG default: Bash #53: ps -e | grep 'udisksd'
2022-03-14 09:03:18.572 DBG default: SOut #53: "  14602 ?        00:00:00 udisksd\n"
2022-03-14 09:03:18.572 DBG default: Exit #53: 0 QProcess::NormalExit
2022-03-14 09:03:18.572 DBG default: Bash #54: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2022-03-14 09:03:18.578 DBG default: SErr #54: "grep: /lib/udev/rules.d: Is a directory\n"
2022-03-14 09:03:18.578 DBG default: Exit #54: 2 QProcess::NormalExit
2022-03-14 09:03:18.578 DBG default: Exec #55: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2022-03-14 09:03:18.582 DBG default: Exit #55: 0 QProcess::NormalExit
2022-03-14 09:03:18.582 DBG default: Exec #56: udevadm control --reload
2022-03-14 09:03:18.590 DBG default: Exit #56: 0 QProcess::NormalExit
2022-03-14 09:03:18.590 DBG default: Exec #57: partprobe -s
2022-03-14 09:03:18.866 DBG default: SOut #57: "/dev/sda: gpt partitions 1 2\n/dev/sdb: msdos partitions 1 2\n/dev/nvme0n1: gpt partitions 1 2 3 4\n/dev/nvme1n1: gpt partitions 1 2 3 4 5\n"
2022-03-14 09:03:18.866 DBG default: Exit #57: 0 QProcess::NormalExit
2022-03-14 09:03:18.869 DBG default: Sleep #1: 1000ms
2022-03-14 09:03:19.820 DBG default: Sleep #1: exit 0
2022-03-14 09:03:19.820 DBG default: << bool MInstall::copyLinux() >>
2022-03-14 09:03:19.821 DBG default: ++ Copying new system ++
2022-03-14 09:03:19.824 DBG default: Exec COPY: /bin/cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2022-03-14 09:06:36.846 DBG default: Exit COPY: 0 QProcess::NormalExit
2022-03-14 09:06:36.846 DBG default: ++ Fixing configuration ++
2022-03-14 09:06:36.849 DBG default: Bash #58: /usr/sbin/live-to-installed /mnt/antiX
2022-03-14 09:06:36.935 DBG default: SErr #58: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\n"
2022-03-14 09:06:36.935 DBG default: Exit #58: 0 QProcess::NormalExit
2022-03-14 09:06:36.935 DBG default: Desktop menu
2022-03-14 09:06:36.935 DBG default: Exec #59: chroot /mnt/antiX desktop-menu --write-out-global
2022-03-14 09:06:36.941 DBG default: SErr #59: "/usr/sbin/chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2022-03-14 09:06:36.941 DBG default: Exit #59: 127 QProcess::NormalExit
2022-03-14 09:06:36.941 DBG default: Creating fstab entry for: "/" "/dev/nvme0n1p2"
2022-03-14 09:06:36.941 DBG default: Exec #60: blkid -o value UUID -s UUID /dev/nvme0n1p2
2022-03-14 09:06:36.955 DBG default: Exit #60: 0 QProcess::NormalExit
2022-03-14 09:06:36.956 DBG default: Exec #61: blkid /dev/nvme0n1p2 -o value -s TYPE
2022-03-14 09:06:36.961 DBG default: Exit #61: 0 QProcess::NormalExit
2022-03-14 09:06:36.961 DBG default: Creating fstab entry for: "SWAP" "/dev/nvme0n1p4"
2022-03-14 09:06:36.961 DBG default: Exec #62: blkid -o value UUID -s UUID /dev/nvme0n1p4
2022-03-14 09:06:36.968 DBG default: Exit #62: 0 QProcess::NormalExit
2022-03-14 09:06:36.968 DBG default: Exec #63: blkid /dev/nvme0n1p4 -o value -s TYPE
2022-03-14 09:06:36.972 DBG default: Exit #63: 0 QProcess::NormalExit
2022-03-14 09:06:36.972 DBG default: Exec #64: blkid -o value UUID -s UUID /dev/nvme0n1p1
2022-03-14 09:06:36.980 DBG default: Exit #64: 0 QProcess::NormalExit
2022-03-14 09:06:36.981 DBG default: Exec #65: /bin/rm -rf /mnt/antiX/home/demo
2022-03-14 09:06:36.985 DBG default: Exit #65: 0 QProcess::NormalExit
2022-03-14 09:06:36.985 DBG default: Bash #66: /bin/rmdir --ignore-fail-on-non-empty /mnt/antiX/media/sd*
2022-03-14 09:06:36.991 DBG default: SErr #66: "/bin/rmdir: failed to remove '/mnt/antiX/media/sd*': No such file or directory\n"
2022-03-14 09:06:36.991 DBG default: Exit #66: 1 QProcess::NormalExit
2022-03-14 09:06:36.991 DBG default: Bash #67: guess-hwclock
2022-03-14 09:06:38.287 DBG default: Exit #67: 0 QProcess::NormalExit
2022-03-14 09:06:38.287 DBG default: Exec #68: /bin/mount --rbind --make-rslave /dev /mnt/antiX/dev
2022-03-14 09:06:38.300 DBG default: Exit #68: 0 QProcess::NormalExit
2022-03-14 09:06:38.300 DBG default: Exec #69: chroot /mnt/antiX rm /var/lib/dbus/machine-id /etc/machine-id
2022-03-14 09:06:38.314 DBG default: Exit #69: 0 QProcess::NormalExit
2022-03-14 09:06:38.315 DBG default: Exec #70: chroot /mnt/antiX dbus-uuidgen --ensure=/etc/machine-id
2022-03-14 09:06:38.325 DBG default: Exit #70: 0 QProcess::NormalExit
2022-03-14 09:06:38.325 DBG default: Exec #71: chroot /mnt/antiX dbus-uuidgen --ensure
2022-03-14 09:06:38.335 DBG default: Exit #71: 0 QProcess::NormalExit
2022-03-14 09:06:38.335 DBG default: Exec #72: /bin/umount -R /mnt/antiX/dev
2022-03-14 09:06:38.345 DBG default: Exit #72: 0 QProcess::NormalExit
2022-03-14 09:06:38.359 DBG default: ++ Setting system configuration ++
2022-03-14 09:06:38.362 DBG default: Bash #73: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2022-03-14 09:06:38.420 DBG default: Exit #73: 1 QProcess::NormalExit
2022-03-14 09:06:38.420 DBG default: Bash #74: /bin/mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2022-03-14 09:06:38.432 DBG default: Exit #74: 1 QProcess::NormalExit
2022-03-14 09:06:38.432 DBG default: Bash #75: /bin/mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2022-03-14 09:06:38.439 DBG default: Exit #75: 1 QProcess::NormalExit
2022-03-14 09:06:38.439 DBG default: Bash #76: /bin/mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2022-03-14 09:06:38.447 DBG default: Exit #76: 1 QProcess::NormalExit
2022-03-14 09:06:38.447 DBG default: Bash #77: /bin/mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2022-03-14 09:06:38.454 DBG default: Exit #77: 1 QProcess::NormalExit
2022-03-14 09:06:38.454 DBG default: Bash #78: /bin/mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2022-03-14 09:06:38.464 DBG default: Exit #78: 1 QProcess::NormalExit
2022-03-14 09:06:38.464 DBG default: Set chroot: /mnt/antiX
2022-03-14 09:06:38.466 DBG default: Set service: "anacron" true
2022-03-14 09:06:38.466 DBG default: Exec #79: update-rc.d anacron " defaults"
2022-03-14 09:06:38.482 DBG default: SErr #79: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.482 DBG default: Exit #79: 1 QProcess::NormalExit
2022-03-14 09:06:38.482 DBG default: Exec #80: systemctl enable anacron
2022-03-14 09:06:38.550 DBG default: SErr #80: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2022-03-14 09:06:38.551 DBG default: Exit #80: 0 QProcess::NormalExit
2022-03-14 09:06:38.551 DBG default: Set service: "cron" true
2022-03-14 09:06:38.551 DBG default: Exec #81: update-rc.d cron " defaults"
2022-03-14 09:06:38.561 DBG default: SErr #81: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.561 DBG default: Exit #81: 1 QProcess::NormalExit
2022-03-14 09:06:38.561 DBG default: Exec #82: systemctl enable cron
2022-03-14 09:06:38.619 DBG default: SErr #82: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2022-03-14 09:06:38.619 DBG default: Exit #82: 0 QProcess::NormalExit
2022-03-14 09:06:38.619 DBG default: Set service: "sudo" true
2022-03-14 09:06:38.619 DBG default: Exec #83: update-rc.d sudo " defaults"
2022-03-14 09:06:38.629 DBG default: SErr #83: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.629 DBG default: Exit #83: 1 QProcess::NormalExit
2022-03-14 09:06:38.629 DBG default: Exec #84: systemctl enable sudo
2022-03-14 09:06:38.635 DBG default: SErr #84: "Failed to look up unit file state: Invalid argument\n"
2022-03-14 09:06:38.635 DBG default: Exit #84: 1 QProcess::NormalExit
2022-03-14 09:06:38.635 DBG default: Set service: "cpufrequtils" true
2022-03-14 09:06:38.635 DBG default: Exec #85: update-rc.d cpufrequtils " defaults"
2022-03-14 09:06:38.642 DBG default: SErr #85: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.642 DBG default: Exit #85: 1 QProcess::NormalExit
2022-03-14 09:06:38.642 DBG default: Exec #86: systemctl enable cpufrequtils
2022-03-14 09:06:38.700 DBG default: SErr #86: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2022-03-14 09:06:38.701 DBG default: Exit #86: 0 QProcess::NormalExit
2022-03-14 09:06:38.701 DBG default: Set service: "smartmontools" true
2022-03-14 09:06:38.701 DBG default: Exec #87: update-rc.d smartmontools " defaults"
2022-03-14 09:06:38.710 DBG default: SErr #87: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.710 DBG default: Exit #87: 1 QProcess::NormalExit
2022-03-14 09:06:38.710 DBG default: Exec #88: systemctl enable smartmontools
2022-03-14 09:06:38.769 DBG default: SErr #88: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2022-03-14 09:06:38.769 DBG default: Exit #88: 0 QProcess::NormalExit
2022-03-14 09:06:38.769 DBG default: Set service: "acpid" true
2022-03-14 09:06:38.769 DBG default: Exec #89: update-rc.d acpid " defaults"
2022-03-14 09:06:38.781 DBG default: SErr #89: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.781 DBG default: Exit #89: 1 QProcess::NormalExit
2022-03-14 09:06:38.781 DBG default: Exec #90: systemctl enable acpid
2022-03-14 09:06:38.838 DBG default: SErr #90: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\n"
2022-03-14 09:06:38.838 DBG default: Exit #90: 0 QProcess::NormalExit
2022-03-14 09:06:38.838 DBG default: Set service: "hddtemp" true
2022-03-14 09:06:38.838 DBG default: Exec #91: update-rc.d hddtemp " defaults"
2022-03-14 09:06:38.849 DBG default: SErr #91: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.849 DBG default: Exit #91: 1 QProcess::NormalExit
2022-03-14 09:06:38.849 DBG default: Exec #92: systemctl enable hddtemp
2022-03-14 09:06:38.909 DBG default: SErr #92: "hddtemp.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable hddtemp\n"
2022-03-14 09:06:38.909 DBG default: Exit #92: 0 QProcess::NormalExit
2022-03-14 09:06:38.909 DBG default: Set service: "dbus" true
2022-03-14 09:06:38.909 DBG default: Exec #93: update-rc.d dbus " defaults"
2022-03-14 09:06:38.920 DBG default: SErr #93: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.920 DBG default: Exit #93: 1 QProcess::NormalExit
2022-03-14 09:06:38.920 DBG default: Exec #94: systemctl enable dbus
2022-03-14 09:06:38.977 DBG default: SErr #94: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n  .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n  a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n  D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n  instance name specified.\n"
2022-03-14 09:06:38.977 DBG default: Exit #94: 0 QProcess::NormalExit
2022-03-14 09:06:38.977 DBG default: Set service: "saned" true
2022-03-14 09:06:38.977 DBG default: Exec #95: update-rc.d saned " defaults"
2022-03-14 09:06:38.987 DBG default: SErr #95: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:38.987 DBG default: Exit #95: 1 QProcess::NormalExit
2022-03-14 09:06:38.987 DBG default: Exec #96: systemctl enable saned
2022-03-14 09:06:38.993 DBG default: SErr #96: "Failed to look up unit file state: Invalid argument\n"
2022-03-14 09:06:38.993 DBG default: Exit #96: 1 QProcess::NormalExit
2022-03-14 09:06:38.993 DBG default: Set service: "haveged" true
2022-03-14 09:06:38.993 DBG default: Exec #97: update-rc.d haveged " defaults"
2022-03-14 09:06:39.001 DBG default: SErr #97: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:39.001 DBG default: Exit #97: 1 QProcess::NormalExit
2022-03-14 09:06:39.001 DBG default: Exec #98: systemctl enable haveged
2022-03-14 09:06:39.064 DBG default: SErr #98: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2022-03-14 09:06:39.064 DBG default: Exit #98: 0 QProcess::NormalExit
2022-03-14 09:06:39.064 DBG default: Set service: "bluetooth" true
2022-03-14 09:06:39.064 DBG default: Exec #99: update-rc.d bluetooth " defaults"
2022-03-14 09:06:39.075 DBG default: SErr #99: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:39.075 DBG default: Exit #99: 1 QProcess::NormalExit
2022-03-14 09:06:39.075 DBG default: Exec #100: systemctl enable bluetooth
2022-03-14 09:06:39.135 DBG default: SErr #100: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable bluetooth\n"
2022-03-14 09:06:39.135 DBG default: Exit #100: 0 QProcess::NormalExit
2022-03-14 09:06:39.135 DBG default: Set service: "rsync" true
2022-03-14 09:06:39.135 DBG default: Exec #101: update-rc.d rsync " defaults"
2022-03-14 09:06:39.144 DBG default: SErr #101: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:39.144 DBG default: Exit #101: 1 QProcess::NormalExit
2022-03-14 09:06:39.144 DBG default: Exec #102: systemctl enable rsync
2022-03-14 09:06:39.205 DBG default: SErr #102: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\n"
2022-03-14 09:06:39.205 DBG default: Exit #102: 0 QProcess::NormalExit
2022-03-14 09:06:39.205 DBG default: Set service: "cups" true
2022-03-14 09:06:39.205 DBG default: Exec #103: update-rc.d cups " defaults"
2022-03-14 09:06:39.216 DBG default: SErr #103: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:39.216 DBG default: Exit #103: 1 QProcess::NormalExit
2022-03-14 09:06:39.216 DBG default: Exec #104: systemctl enable cups
2022-03-14 09:06:39.275 DBG default: SErr #104: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cups\n"
2022-03-14 09:06:39.275 DBG default: Exit #104: 0 QProcess::NormalExit
2022-03-14 09:06:39.275 DBG default: Set service: "smbd" true
2022-03-14 09:06:39.275 DBG default: Exec #105: update-rc.d smbd " defaults"
2022-03-14 09:06:39.286 DBG default: SErr #105: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:39.286 DBG default: Exit #105: 1 QProcess::NormalExit
2022-03-14 09:06:39.286 DBG default: Exec #106: systemctl enable smbd
2022-03-14 09:06:39.343 DBG default: SErr #106: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2022-03-14 09:06:39.344 DBG default: Exit #106: 0 QProcess::NormalExit
2022-03-14 09:06:39.344 DBG default: Set service: "nmbd" true
2022-03-14 09:06:39.344 DBG default: Exec #107: update-rc.d nmbd " defaults"
2022-03-14 09:06:39.354 DBG default: SErr #107: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:39.355 DBG default: Exit #107: 1 QProcess::NormalExit
2022-03-14 09:06:39.355 DBG default: Exec #108: systemctl enable nmbd
2022-03-14 09:06:39.415 DBG default: SErr #108: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2022-03-14 09:06:39.415 DBG default: Exit #108: 0 QProcess::NormalExit
2022-03-14 09:06:39.415 DBG default: Set service: "samba-ad-dc" true
2022-03-14 09:06:39.415 DBG default: Exec #109: update-rc.d samba-ad-dc " defaults"
2022-03-14 09:06:39.425 DBG default: SErr #109: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:06:39.425 DBG default: Exit #109: 1 QProcess::NormalExit
2022-03-14 09:06:39.425 DBG default: Exec #110: systemctl enable samba-ad-dc
2022-03-14 09:06:39.431 DBG default: SErr #110: "Failed to look up unit file state: Invalid argument\n"
2022-03-14 09:06:39.431 DBG default: Exit #110: 1 QProcess::NormalExit
2022-03-14 09:06:39.431 DBG default: End chroot: /mnt/antiX
2022-03-14 09:06:39.433 DBG default: Exec #111: sed -i s/WORKGROUP/Workgroup/g /mnt/antiX/etc/samba/smb.conf
2022-03-14 09:06:39.440 DBG default: Exit #111: 0 QProcess::NormalExit
2022-03-14 09:06:39.440 DBG default: Bash #112: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/Asus-Linux/' /mnt/antiX/etc/hosts
2022-03-14 09:06:39.493 DBG default: Exit #112: 0 QProcess::NormalExit
2022-03-14 09:06:39.493 DBG default: Bash #113: echo "Asus-Linux" | cat > /mnt/antiX/etc/hostname
2022-03-14 09:06:39.503 DBG default: Exit #113: 0 QProcess::NormalExit
2022-03-14 09:06:39.503 DBG default: Bash #114: echo "Asus-Linux" | cat > /mnt/antiX/etc/mailname
2022-03-14 09:06:39.511 DBG default: Exit #114: 0 QProcess::NormalExit
2022-03-14 09:06:39.511 DBG default: Bash #115: sed -i 's/.*send host-name.*/send host-name "Asus-Linux";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2022-03-14 09:06:39.519 DBG default: Exit #115: 0 QProcess::NormalExit
2022-03-14 09:06:39.519 DBG default: Bash #116: echo "Asus-Linux" | cat > /mnt/antiX/etc/defaultdomain
2022-03-14 09:06:39.526 DBG default: Exit #116: 0 QProcess::NormalExit
2022-03-14 09:06:39.526 DBG default: << void MInstall::setLocale() >>
2022-03-14 09:06:39.526 DBG default: Update locale
2022-03-14 09:06:39.526 DBG default: Bash #117: chroot /mnt/antiX /usr/sbin/update-locale "LANG=en_US.UTF-8"
2022-03-14 09:06:39.544 DBG default: Exit #117: 0 QProcess::NormalExit
2022-03-14 09:06:39.544 DBG default: Exec #118: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /mnt/antiX/etc/localtime
2022-03-14 09:06:39.550 DBG default: Exit #118: 0 QProcess::NormalExit
2022-03-14 09:06:39.550 DBG default: Exec #119: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /etc/localtime
2022-03-14 09:06:39.556 DBG default: Exit #119: 0 QProcess::NormalExit
2022-03-14 09:06:39.557 DBG default: Bash #120: echo Europe/Berlin > /mnt/antiX/etc/timezone
2022-03-14 09:06:39.562 DBG default: Exit #120: 0 QProcess::NormalExit
2022-03-14 09:06:39.562 DBG default: Bash #121: echo Europe/Berlin > /etc/timezone
2022-03-14 09:06:39.567 DBG default: Exit #121: 0 QProcess::NormalExit
2022-03-14 09:06:39.567 DBG default: Bash #122: echo '0.0 0 0.0
0
LOCAL' > /etc/adjtime
2022-03-14 09:06:39.572 DBG default: Exit #122: 0 QProcess::NormalExit
2022-03-14 09:06:39.572 DBG default: Exec #123: hwclock --hctosys
2022-03-14 09:06:40.000 DBG default: Exit #123: 0 QProcess::NormalExit
2022-03-14 09:06:40.000 DBG default: Exec #124: /bin/cp "-f /etc/adjtime" /mnt/antiX/etc/
2022-03-14 09:06:40.009 DBG default: SErr #124: "/bin/cp: invalid option -- ' '\nTry '/bin/cp --help' for more information.\n"
2022-03-14 09:06:40.009 DBG default: Exit #124: 1 QProcess::NormalExit
2022-03-14 09:06:40.009 DBG default: Exec #125: /bin/cp "-f /etc/default/rcS" /mnt/antiX/etc/default
2022-03-14 09:06:40.014 DBG default: SErr #125: "/bin/cp: invalid option -- ' '\nTry '/bin/cp --help' for more information.\n"
2022-03-14 09:06:40.014 DBG default: Exit #125: 1 QProcess::NormalExit
2022-03-14 09:06:40.014 DBG default: Bash #126: sed -i '/data0=/c\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2022-03-14 09:06:40.021 DBG default: SErr #126: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2022-03-14 09:06:40.021 DBG default: Exit #126: 2 QProcess::NormalExit
2022-03-14 09:06:40.021 DBG default: Bash #127: sed -i '/data0=/c\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2022-03-14 09:06:40.028 DBG default: SErr #127: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2022-03-14 09:06:40.028 DBG default: Exit #127: 2 QProcess::NormalExit
2022-03-14 09:06:40.029 DBG default: Bash #128: sed -i '/time_format=/c\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2022-03-14 09:06:40.034 DBG default: SErr #128: "sed: can't read /home/demo/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2022-03-14 09:06:40.034 DBG default: Exit #128: 2 QProcess::NormalExit
2022-03-14 09:06:40.034 DBG default: Bash #129: sed -i '/time_format=/c\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2022-03-14 09:06:40.041 DBG default: SErr #129: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2022-03-14 09:06:40.041 DBG default: Exit #129: 2 QProcess::NormalExit
2022-03-14 09:06:40.041 DBG default: Bash #130: sed -i '/use24hFormat=/c\use24hFormat=2' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2022-03-14 09:06:40.047 DBG default: SErr #130: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2022-03-14 09:06:40.047 DBG default: Exit #130: 2 QProcess::NormalExit
2022-03-14 09:06:40.047 DBG default: Bash #131: sed -i '/use24hFormat=/c\use24hFormat=2' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2022-03-14 09:06:40.056 DBG default: Exit #131: 0 QProcess::NormalExit
2022-03-14 09:06:40.056 DBG default: Bash #132: sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2022-03-14 09:06:40.063 DBG default: SErr #132: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2022-03-14 09:06:40.063 DBG default: Exit #132: 2 QProcess::NormalExit
2022-03-14 09:06:40.063 DBG default: Bash #133: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2022-03-14 09:06:40.069 DBG default: SErr #133: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2022-03-14 09:06:40.069 DBG default: Exit #133: 2 QProcess::NormalExit
2022-03-14 09:06:40.069 DBG default: Bash #134: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2022-03-14 09:06:40.076 DBG default: SErr #134: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2022-03-14 09:06:40.076 DBG default: Exit #134: 2 QProcess::NormalExit
2022-03-14 09:06:40.076 DBG default: Localize repo
2022-03-14 09:06:40.076 DBG default: Exec #135: chroot /mnt/antiX localize-repo default
2022-03-14 09:06:40.120 DBG default: Exit #135: 0 QProcess::NormalExit
2022-03-14 09:06:40.120 DBG default: Set chroot: /mnt/antiX
2022-03-14 09:06:40.123 DBG default: Exec #136: passwd -l root
2022-03-14 09:06:40.140 DBG default: SOut #136: "passwd: password expiry information changed.\n"
2022-03-14 09:06:40.140 DBG default: Exit #136: 0 QProcess::NormalExit
2022-03-14 09:06:40.140 DBG default: Exec #137: passwd -d demo
2022-03-14 09:06:40.146 DBG default: SErr #137: "passwd: user 'demo' does not exist\n"
2022-03-14 09:06:40.146 DBG default: Exit #137: 1 QProcess::NormalExit
2022-03-14 09:06:40.146 DBG default: -- FAILED Phase 3 - Failed to set user account passwords. --
2022-03-14 09:06:45.380 DBG default: << void MInstall::cleanup(bool) >>
2022-03-14 09:06:45.380 DBG default: Exec #138: /bin/umount -l /mnt/antiX/boot/efi
2022-03-14 09:06:45.444 DBG default: SErr #138: "umount: /mnt/antiX/boot/efi: umount failed: No such file or directory.\n"
2022-03-14 09:06:45.444 DBG default: Exit #138: 32 QProcess::NormalExit
2022-03-14 09:06:45.444 DBG default: Exec #139: /bin/umount -l /mnt/antiX/proc
2022-03-14 09:06:45.450 DBG default: SErr #139: "umount: /mnt/antiX/proc: umount failed: No such file or directory.\n"
2022-03-14 09:06:45.450 DBG default: Exit #139: 32 QProcess::NormalExit
2022-03-14 09:06:45.450 DBG default: Exec #140: /bin/umount -l /mnt/antiX/sys
2022-03-14 09:06:45.457 DBG default: SErr #140: "umount: /mnt/antiX/sys: umount failed: No such file or directory.\n"
2022-03-14 09:06:45.457 DBG default: Exit #140: 32 QProcess::NormalExit
2022-03-14 09:06:45.457 DBG default: Exec #141: /bin/umount -l /mnt/antiX/dev/shm
2022-03-14 09:06:45.463 DBG default: SErr #141: "umount: /mnt/antiX/dev/shm: umount failed: No such file or directory.\n"
2022-03-14 09:06:45.463 DBG default: Exit #141: 32 QProcess::NormalExit
2022-03-14 09:06:45.463 DBG default: Exec #142: /bin/umount -l /mnt/antiX/dev
2022-03-14 09:06:45.471 DBG default: SErr #142: "umount: /mnt/antiX/dev: umount failed: No such file or directory.\n"
2022-03-14 09:06:45.471 DBG default: Exit #142: 32 QProcess::NormalExit
2022-03-14 09:06:45.471 DBG default: Exec #143: swapoff /dev/nvme0n1p4
2022-03-14 09:06:45.476 DBG default: SErr #143: "swapoff: /dev/nvme0n1p4: swapoff failed: No such file or directory\n"
2022-03-14 09:06:45.476 DBG default: Exit #143: 4 QProcess::NormalExit
2022-03-14 09:06:45.476 DBG default: Exec #144: /bin/umount -l /mnt/antiX/
2022-03-14 09:06:45.482 DBG default: SErr #144: "umount: /mnt/antiX/: umount failed: No such file or directory.\n"
2022-03-14 09:06:45.482 DBG default: Exit #144: 32 QProcess::NormalExit

#35 Post by **SIttner76** » Mon Mar 14, 2022 4:21 am

I also tried to outsmart the installer by actually using "demo" as the user name, unfortunately this also fails:

Code: Select all

2022-03-14 09:11:51.211 DBG default: Installer version: 22.3.05
2022-03-14 09:11:51.494 DBG default: << void MInstall::startup() >>
2022-03-14 09:11:51.495 DBG default: check for remastered home demo folder: false
2022-03-14 09:11:51.495 DBG default: Exec #1: du -sb /live/aufs/boot
2022-03-14 09:11:51.537 DBG default: Exit #1: 0 QProcess::NormalExit
2022-03-14 09:11:51.537 DBG default: linuxfs file is at :  "/live/boot-dev/antiX/linuxfs"
2022-03-14 09:11:51.537 DBG default: Bash #2: dd if=/live/boot-dev/antiX/linuxfs bs=1 skip=20 count=2 status=none 2>/dev/null | od -An -tdI
2022-03-14 09:11:51.546 DBG default: Exit #2: 0 QProcess::NormalExit
2022-03-14 09:11:51.546 DBG default: linuxfs compression type is  "5" compression factor is  42
2022-03-14 09:11:51.546 DBG default: Bash #3: df /live/linux --output=used --total |tail -n1
2022-03-14 09:11:51.550 DBG default: Exit #3: 0 QProcess::NormalExit
2022-03-14 09:11:51.551 DBG default: linuxfs file size is  16338124800  rootfs file size is  0
2022-03-14 09:11:51.551 DBG default: Minimum space: 671088640 (boot), 17411866624 (root)
2022-03-14 09:11:51.551 DBG default: Bash #4: uname -m | grep -q i686
2022-03-14 09:11:51.556 DBG default: Exit #4: 1 QProcess::NormalExit
2022-03-14 09:11:51.557 DBG default: uefi = true
2022-03-14 09:11:51.557 DBG default: << void MInstall::setupAutoMount(bool) >>
2022-03-14 09:11:51.557 DBG default: Bash #5: ps -e | grep 'udisksd'
2022-03-14 09:11:51.576 DBG default: SOut #5: "  14005 ?        00:00:00 udisksd\n"
2022-03-14 09:11:51.576 DBG default: Exit #5: 0 QProcess::NormalExit
2022-03-14 09:11:51.576 DBG default: Bash #6: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2022-03-14 09:11:51.588 DBG default: SErr #6: "grep: /lib/udev/rules.d: Is a directory\n"
2022-03-14 09:11:51.588 DBG default: Exit #6: 2 QProcess::NormalExit
2022-03-14 09:11:51.588 DBG default: Bash #7: systemctl list-units --full --all -t mount --no-legend 2>/dev/null | grep -v masked | cut -f1 -d' ' | egrep -v '^(dev-hugepages|dev-mqueue|proc-sys-fs-binfmt_misc|run-user-.*-gvfs|sys-fs-fuse-connections|sys-kernel-config|sys-kernel-debug)'
2022-03-14 09:11:51.624 DBG default: Exit #7: 1 QProcess::NormalExit
2022-03-14 09:11:51.625 DBG default: MkPath(SUCCESS): "/run/udev/rules.d"
2022-03-14 09:11:51.625 DBG default: Bash #8: echo 'SUBSYSTEM=="block", ENV{UDISKS_IGNORE}="1"' > /run/udev/rules.d/91-mx-udisks-inhibit.rules
2022-03-14 09:11:51.628 DBG default: Exit #8: 0 QProcess::NormalExit
2022-03-14 09:11:51.628 DBG default: Exec #9: udevadm control --reload
2022-03-14 09:11:51.636 DBG default: Exit #9: 0 QProcess::NormalExit
2022-03-14 09:11:51.636 DBG default: Exec #10: udevadm trigger --subsystem-match=block
2022-03-14 09:11:51.644 DBG default: Exit #10: 0 QProcess::NormalExit
2022-03-14 09:11:51.644 DBG default: Bash #11: /bin/ls -1 /home | grep -Ev '(lost\+found|demo|snapshot)' | grep -q [a-zA-Z0-9]
2022-03-14 09:11:51.649 DBG default: Exit #11: 1 QProcess::NormalExit
2022-03-14 09:11:51.649 DBG default: check for possible snapshot: false
2022-03-14 09:11:51.706 DBG default: Exec #12: find -L /usr/share/zoneinfo/posix -mindepth 2 -type f -printf %P\n
2022-03-14 09:11:51.712 DBG default: Exit #12: 0 QProcess::NormalExit
2022-03-14 09:11:51.713 DBG default: Bash #13: locale -a | grep -Ev '^(C|POSIX)\.?' | grep -E 'utf8|UTF-8'
2022-03-14 09:11:51.724 DBG default: Exit #13: 0 QProcess::NormalExit
2022-03-14 09:11:51.724 DBG default: Bash #14: grub-probe -d /dev/sda2 2>/dev/null | grep hfsplus
2022-03-14 09:11:51.857 DBG default: Exit #14: 1 QProcess::NormalExit
2022-03-14 09:11:51.857 DBG default: Bash #15: dpkg -s samba | grep '^Status.*ok.*' | sed -e 's/.*ok //'
2022-03-14 09:11:51.928 DBG default: Exit #15: 0 QProcess::NormalExit
2022-03-14 09:11:51.932 DBG default: << void MInstall::updatePartitionWidgets(bool) >>
2022-03-14 09:11:51.932 DBG default: Exec #16: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,PTTYPE,PARTTYPENAME,FSTYPE,LABEL,MODEL,PARTFLAGS
2022-03-14 09:11:51.941 DBG default: Exit #16: 0 QProcess::NormalExit
2022-03-14 09:11:51.941 DBG default: Exec #17: partprobe -s
2022-03-14 09:11:52.208 DBG default: SOut #17: "/dev/sda: gpt partitions 1 2\n/dev/sdb: msdos partitions 1 2\n/dev/nvme0n1: gpt partitions 1 2 3 4\n/dev/nvme1n1: gpt partitions 1 2 3 4 5\n"
2022-03-14 09:11:52.209 DBG default: Exit #17: 0 QProcess::NormalExit
2022-03-14 09:11:52.209 DBG default: Exec #18: blkid -c /dev/null
2022-03-14 09:11:52.258 DBG default: SOut #18: "/dev/nvme1n1p1: UUID=\"3877-C1A9\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"EFI system partition\" PARTUUID=\"0f114bbc-7e46-4852-8ac4-8dfd74307603\"\n/dev/nvme1n1p2: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"016ed921-2b50-4489-849b-1f41d9ade57c\"\n/dev/nvme1n1p3: LABEL=\"Windows\" BLOCK_SIZE=\"512\" UUID=\"0CC49576C495632E\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"c13f6a51-782d-4b0d-bf9b-e9dacd17f35d\"\n/dev/nvme1n1p4: BLOCK_SIZE=\"512\" UUID=\"7808E41708E3D1E4\" TYPE=\"ntfs\" PARTUUID=\"a5b87984-177f-487b-8a41-1ca6676bb060\"\n/dev/nvme1n1p5: LABEL=\"Data\" BLOCK_SIZE=\"512\" UUID=\"54549B66549B499E\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"21be4eeb-7138-4e38-a9cf-6828aa99d261\"\n/dev/nvme0n1p1: LABEL_FATBOOT=\"NO_LABEL\" LABEL=\"NO_LABEL\" UUID=\"8A53-E83A\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"7b563034-fede-264d-bcd5-ba7cf089ab74\"\n/dev/nvme0n1p2: LABEL=\"rootMX21\" UUID=\"ed7b0808-c417-4a76-b9ec-23f9b1781a78\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"33f000aa-ed70-7749-8c84-f5e9761b7426\"\n/dev/nvme0n1p3: LABEL=\"MX-Data\" UUID=\"ff36287c-151a-4f57-a891-c65e6aad0197\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"03738d24-7b5d-bc43-bc8e-25a8ed73b874\"\n/dev/nvme0n1p4: LABEL=\"swapMX\" UUID=\"9946635c-940d-46f5-a19e-4f2134214cac\" TYPE=\"swap\" PARTUUID=\"3d3f9ece-35f0-1741-8c5e-fc553df24777\"\n/dev/sda1: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"9dc9f4f4-c688-4a86-9e63-fc4d8dbd7443\"\n/dev/sda2: LABEL=\"Toshiba\" BLOCK_SIZE=\"512\" UUID=\"64D057DFD057B5D0\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"0170fa1b-1991-4c8c-b738-3502696b8309\"\n/dev/sdb1: LABEL=\"Live-usb\" UUID=\"6c15101b-42ee-46f7-8225-daad580c1627\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"ce5525ba-01\"\n/dev/sdb2: LABEL_FATBOOT=\"LIVE-UEFI\" LABEL=\"LIVE-UEFI\" UUID=\"2A32-6AA5\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"ce5525ba-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2022-03-14 09:11:52.258 DBG default: Exit #18: 0 QProcess::NormalExit
2022-03-14 09:11:52.258 DBG default: Exec #19: parted -lm
2022-03-14 09:11:52.315 DBG default: Exit #19: 0 QProcess::NormalExit
2022-03-14 09:11:52.315 DBG default: Bash #20: lsblk -T -bJo TYPE,NAME,PATH,UUID,ROTA,DISC-GRAN,SIZE,PHY-SEC,FSTYPE,LABEL /dev/mapper/*
2022-03-14 09:11:52.321 DBG default: SErr #20: "lsblk: /dev/mapper/control: not a block device\n"
2022-03-14 09:11:52.321 DBG default: Exit #20: 32 QProcess::NormalExit
2022-03-14 09:12:18.550 DBG default: Mount points:
2022-03-14 09:12:18.550 DBG default:  - "/" - "nvme0n1p2" "" "/dev/nvme0n1p2"
2022-03-14 09:12:18.550 DBG default:  - "SWAP" - "nvme0n1p4" "" "/dev/nvme0n1p4"
2022-03-14 09:12:20.007 DBG default: << bool MInstall::saveHomeBasic() >>
2022-03-14 09:12:20.057 DBG default: ++ Preparing to install MX Linux ++
2022-03-14 09:12:20.068 DBG default: Exec #21: smartctl -H /dev/sda
2022-03-14 09:12:20.108 DBG default: SOut #21: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF READ SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2022-03-14 09:12:20.108 DBG default: Exit #21: 0 QProcess::NormalExit
2022-03-14 09:12:20.108 DBG default: Bash #22: smartctl -A /dev/sda| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2022-03-14 09:12:20.133 DBG default: Exit #22: 0 QProcess::NormalExit
2022-03-14 09:12:20.133 DBG default: Exec #23: smartctl -H /dev/sdb
2022-03-14 09:12:20.147 DBG default: SOut #23: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n/dev/sdb: Unknown USB bridge [0x8564:0x1000 (0x100)]\nPlease specify device type with the -d option.\n\nUse smartctl -h to get a usage summary\n\n"
2022-03-14 09:12:20.147 DBG default: Exit #23: 1 QProcess::NormalExit
2022-03-14 09:12:20.147 DBG default: Bash #24: smartctl -A /dev/sdb| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2022-03-14 09:12:20.161 DBG default: Exit #24: 0 QProcess::NormalExit
2022-03-14 09:12:20.161 DBG default: Exec #25: smartctl -H /dev/nvme1n1
2022-03-14 09:12:20.179 DBG default: SOut #25: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2022-03-14 09:12:20.179 DBG default: Exit #25: 0 QProcess::NormalExit
2022-03-14 09:12:20.179 DBG default: Bash #26: smartctl -A /dev/nvme1n1| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2022-03-14 09:12:20.200 DBG default: Exit #26: 0 QProcess::NormalExit
2022-03-14 09:12:20.200 DBG default: Exec #27: smartctl -H /dev/nvme0n1
2022-03-14 09:12:20.220 DBG default: SOut #27: "smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-3mx-amd64] (local build)\nCopyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org\n\n=== START OF SMART DATA SECTION ===\nSMART overall-health self-assessment test result: PASSED\n\n"
2022-03-14 09:12:20.220 DBG default: Exit #27: 0 QProcess::NormalExit
2022-03-14 09:12:20.220 DBG default: Bash #28: smartctl -A /dev/nvme0n1| grep -E "^  5|^196|^197|^198" | awk '{ if ( $10 != 0 ) { print $1,$2,$10} }'
2022-03-14 09:12:20.240 DBG default: Exit #28: 0 QProcess::NormalExit
2022-03-14 09:12:20.240 DBG default: << void MInstall::cleanup(bool) >>
2022-03-14 09:12:20.240 DBG default: Exec #29: /bin/umount -l /mnt/antiX/boot/efi
2022-03-14 09:12:20.249 DBG default: SErr #29: "umount: /mnt/antiX/boot/efi: no mount point specified.\n"
2022-03-14 09:12:20.249 DBG default: Exit #29: 32 QProcess::NormalExit
2022-03-14 09:12:20.249 DBG default: Exec #30: /bin/umount -l /mnt/antiX/proc
2022-03-14 09:12:20.253 DBG default: SErr #30: "umount: /mnt/antiX/proc: no mount point specified.\n"
2022-03-14 09:12:20.253 DBG default: Exit #30: 32 QProcess::NormalExit
2022-03-14 09:12:20.253 DBG default: Exec #31: /bin/umount -l /mnt/antiX/sys
2022-03-14 09:12:20.258 DBG default: SErr #31: "umount: /mnt/antiX/sys: no mount point specified.\n"
2022-03-14 09:12:20.258 DBG default: Exit #31: 32 QProcess::NormalExit
2022-03-14 09:12:20.258 DBG default: Exec #32: /bin/umount -l /mnt/antiX/dev/shm
2022-03-14 09:12:20.263 DBG default: SErr #32: "umount: /mnt/antiX/dev/shm: no mount point specified.\n"
2022-03-14 09:12:20.263 DBG default: Exit #32: 32 QProcess::NormalExit
2022-03-14 09:12:20.263 DBG default: Exec #33: /bin/umount -l /mnt/antiX/dev
2022-03-14 09:12:20.267 DBG default: SErr #33: "umount: /mnt/antiX/dev: no mount point specified.\n"
2022-03-14 09:12:20.267 DBG default: Exit #33: 32 QProcess::NormalExit
2022-03-14 09:12:20.268 DBG default: Exec #34: swapoff /dev/nvme0n1p4
2022-03-14 09:12:20.281 DBG default: Exit #34: 0 QProcess::NormalExit
2022-03-14 09:12:20.281 DBG default: Exec #35: /bin/umount -l /mnt/antiX/
2022-03-14 09:12:20.288 DBG default: SErr #35: "umount: /mnt/antiX/: no mount point specified.\n"
2022-03-14 09:12:20.288 DBG default: Exit #35: 32 QProcess::NormalExit
2022-03-14 09:12:20.288 DBG default: << bool PartMan::preparePartitions() >>
2022-03-14 09:12:20.288 DBG default: Exec #36: swapoff sdb2
2022-03-14 09:12:20.292 DBG default: SErr #36: "swapoff: sdb2: swapoff failed: No such file or directory\n"
2022-03-14 09:12:20.293 DBG default: Exit #36: 4 QProcess::NormalExit
2022-03-14 09:12:20.293 DBG default: Exec #37: /bin/umount sdb2
2022-03-14 09:12:20.298 DBG default: SErr #37: "umount: sdb2: no mount point specified.\n"
2022-03-14 09:12:20.298 DBG default: Exit #37: 32 QProcess::NormalExit
2022-03-14 09:12:20.298 DBG default: Exec #38: swapoff nvme0n1p1
2022-03-14 09:12:20.303 DBG default: SErr #38: "swapoff: nvme0n1p1: swapoff failed: No such file or directory\n"
2022-03-14 09:12:20.303 DBG default: Exit #38: 4 QProcess::NormalExit
2022-03-14 09:12:20.303 DBG default: Exec #39: /bin/umount nvme0n1p1
2022-03-14 09:12:20.308 DBG default: SErr #39: "umount: nvme0n1p1: no mount point specified.\n"
2022-03-14 09:12:20.308 DBG default: Exit #39: 32 QProcess::NormalExit
2022-03-14 09:12:20.308 DBG default: Exec #40: swapoff nvme0n1p2
2022-03-14 09:12:20.314 DBG default: SErr #40: "swapoff: nvme0n1p2: swapoff failed: No such file or directory\n"
2022-03-14 09:12:20.314 DBG default: Exit #40: 4 QProcess::NormalExit
2022-03-14 09:12:20.314 DBG default: Exec #41: /bin/umount nvme0n1p2
2022-03-14 09:12:20.318 DBG default: SErr #41: "umount: nvme0n1p2: no mount point specified.\n"
2022-03-14 09:12:20.318 DBG default: Exit #41: 32 QProcess::NormalExit
2022-03-14 09:12:20.318 DBG default: Exec #42: swapoff nvme0n1p4
2022-03-14 09:12:20.322 DBG default: SErr #42: "swapoff: nvme0n1p4: swapoff failed: No such file or directory\n"
2022-03-14 09:12:20.322 DBG default: Exit #42: 4 QProcess::NormalExit
2022-03-14 09:12:20.322 DBG default: Exec #43: /bin/umount nvme0n1p4
2022-03-14 09:12:20.327 DBG default: SErr #43: "umount: nvme0n1p4: no mount point specified.\n"
2022-03-14 09:12:20.327 DBG default: Exit #43: 32 QProcess::NormalExit
2022-03-14 09:12:20.327 DBG default: ++ Preparing required partitions ++
2022-03-14 09:12:20.330 DBG default: Bash #44: /sbin/sfdisk /dev/sdb --part-type 2 ef
2022-03-14 09:12:20.605 DBG default: SOut #44: "\nThe partition table has been altered.\nCalling ioctl() to re-read partition table.\nThe kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or partx(8).\nSyncing disks.\n"
2022-03-14 09:12:20.605 DBG default: SErr #44: "Re-reading the partition table failed.: Device or resource busy\n"
2022-03-14 09:12:20.606 DBG default: Exit #44: 0 QProcess::NormalExit
2022-03-14 09:12:20.608 DBG default: Bash #45: /sbin/sgdisk /dev/nvme0n1 --typecode=1:ef00
2022-03-14 09:12:21.636 DBG default: SOut #45: "The operation has completed successfully.\n"
2022-03-14 09:12:21.636 DBG default: Exit #45: 0 QProcess::NormalExit
2022-03-14 09:12:21.637 DBG default: Bash #46: /sbin/sgdisk /dev/nvme0n1 --typecode=2:8303
2022-03-14 09:12:22.658 DBG default: SOut #46: "The operation has completed successfully.\n"
2022-03-14 09:12:22.658 DBG default: Exit #46: 0 QProcess::NormalExit
2022-03-14 09:12:22.660 DBG default: Bash #47: /sbin/sgdisk /dev/nvme0n1 --typecode=4:8303
2022-03-14 09:12:23.676 DBG default: SOut #47: "The operation has completed successfully.\n"
2022-03-14 09:12:23.676 DBG default: Exit #47: 0 QProcess::NormalExit
2022-03-14 09:12:23.678 DBG default: Exec #48: partprobe -s
2022-03-14 09:12:23.927 DBG default: SOut #48: "/dev/sda: gpt partitions 1 2\n/dev/sdb: msdos partitions 1 2\n/dev/nvme0n1: gpt partitions 1 2 3 4\n/dev/nvme1n1: gpt partitions 1 2 3 4 5\n"
2022-03-14 09:12:23.927 DBG default: Exit #48: 0 QProcess::NormalExit
2022-03-14 09:12:23.927 DBG default: << bool PartMan::formatPartitions() >>
2022-03-14 09:12:23.927 DBG default: ++ Formatting: / (root) ++
2022-03-14 09:12:23.929 DBG default: Exec #49: mkfs.ext4 -F /dev/nvme0n1p2 -L rootMX21
2022-03-14 09:12:24.282 DBG default: SOut #49: "Discarding device blocks:     4096/26534912\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b23072768/26534912\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b                 \b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\bdone                            \nCreating filesystem with 26534912 4k blocks and 6635520 inodes\nFilesystem UUID: 768539b8-6e57-414b-ad58-2ab3dabc3552\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, \n\t4096000, 7962624, 11239424, 20480000, 23887872\n\nAllocating group tables:   0/810\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nWriting inode tables:   0/810\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone                            \nCreating journal (131072 blocks): done\nWriting superblocks and filesystem accounting information:   0/810\b\b\b\b\b\b\b       \b\b\b\b\b\b\bdone\n\n"
2022-03-14 09:12:24.282 DBG default: SErr #49: "mke2fs 1.46.2 (28-Feb-2021)\n"
2022-03-14 09:12:24.282 DBG default: Exit #49: 0 QProcess::NormalExit
2022-03-14 09:12:24.282 DBG default: Exec #50: /sbin/tune2fs -c0 -C0 -i1m /dev/nvme0n1p2
2022-03-14 09:12:24.297 DBG default: SOut #50: "tune2fs 1.46.2 (28-Feb-2021)\nSetting maximal mount count to -1\nSetting current mount count to 0\nSetting interval between checks to 2592000 seconds\n"
2022-03-14 09:12:24.297 DBG default: Exit #50: 0 QProcess::NormalExit
2022-03-14 09:12:24.298 DBG default: << bool PartMan::mountPartitions() >>
2022-03-14 09:12:24.298 DBG default: ++ Mounting: /dev/nvme0n1p2 ++
2022-03-14 09:12:24.301 DBG default: MkPath(SUCCESS): "/mnt/antiX/"
2022-03-14 09:12:24.301 DBG default: Exec #51: /bin/mount /dev/nvme0n1p2 /mnt/antiX/ -o discard,noatime
2022-03-14 09:12:24.317 DBG default: Exit #51: 0 QProcess::NormalExit
2022-03-14 09:12:24.317 DBG default: Exec #52: blkid -c /dev/null
2022-03-14 09:12:24.379 DBG default: SOut #52: "/dev/nvme1n1p1: UUID=\"3877-C1A9\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTLABEL=\"EFI system partition\" PARTUUID=\"0f114bbc-7e46-4852-8ac4-8dfd74307603\"\n/dev/nvme1n1p2: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"016ed921-2b50-4489-849b-1f41d9ade57c\"\n/dev/nvme1n1p3: LABEL=\"Windows\" BLOCK_SIZE=\"512\" UUID=\"0CC49576C495632E\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"c13f6a51-782d-4b0d-bf9b-e9dacd17f35d\"\n/dev/nvme1n1p4: BLOCK_SIZE=\"512\" UUID=\"7808E41708E3D1E4\" TYPE=\"ntfs\" PARTUUID=\"a5b87984-177f-487b-8a41-1ca6676bb060\"\n/dev/nvme1n1p5: LABEL=\"Data\" BLOCK_SIZE=\"512\" UUID=\"54549B66549B499E\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"21be4eeb-7138-4e38-a9cf-6828aa99d261\"\n/dev/nvme0n1p1: LABEL_FATBOOT=\"NO_LABEL\" LABEL=\"NO_LABEL\" UUID=\"8A53-E83A\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"7b563034-fede-264d-bcd5-ba7cf089ab74\"\n/dev/nvme0n1p2: LABEL=\"rootMX21\" UUID=\"768539b8-6e57-414b-ad58-2ab3dabc3552\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"33f000aa-ed70-7749-8c84-f5e9761b7426\"\n/dev/nvme0n1p3: LABEL=\"MX-Data\" UUID=\"ff36287c-151a-4f57-a891-c65e6aad0197\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"03738d24-7b5d-bc43-bc8e-25a8ed73b874\"\n/dev/nvme0n1p4: LABEL=\"swapMX\" UUID=\"9946635c-940d-46f5-a19e-4f2134214cac\" TYPE=\"swap\" PARTUUID=\"3d3f9ece-35f0-1741-8c5e-fc553df24777\"\n/dev/sda1: PARTLABEL=\"Microsoft reserved partition\" PARTUUID=\"9dc9f4f4-c688-4a86-9e63-fc4d8dbd7443\"\n/dev/sda2: LABEL=\"Toshiba\" BLOCK_SIZE=\"512\" UUID=\"64D057DFD057B5D0\" TYPE=\"ntfs\" PARTLABEL=\"Basic data partition\" PARTUUID=\"0170fa1b-1991-4c8c-b738-3502696b8309\"\n/dev/sdb1: LABEL=\"Live-usb\" UUID=\"6c15101b-42ee-46f7-8225-daad580c1627\" BLOCK_SIZE=\"4096\" TYPE=\"ext4\" PARTUUID=\"ce5525ba-01\"\n/dev/sdb2: LABEL_FATBOOT=\"LIVE-UEFI\" LABEL=\"LIVE-UEFI\" UUID=\"2A32-6AA5\" BLOCK_SIZE=\"512\" TYPE=\"vfat\" PARTUUID=\"ce5525ba-02\"\n/dev/loop0: TYPE=\"squashfs\"\n"
2022-03-14 09:12:24.380 DBG default: Exit #52: 0 QProcess::NormalExit
2022-03-14 09:12:24.380 DBG default: << bool MInstall::installLinux() >>
2022-03-14 09:12:24.380 DBG default: ++ Creating system directories ++
2022-03-14 09:12:24.385 DBG default: << void MInstall::setupAutoMount(bool) >>
2022-03-14 09:12:24.385 DBG default: Bash #53: ps -e | grep 'udisksd'
2022-03-14 09:12:24.397 DBG default: SOut #53: "  14005 ?        00:00:00 udisksd\n"
2022-03-14 09:12:24.397 DBG default: Exit #53: 0 QProcess::NormalExit
2022-03-14 09:12:24.397 DBG default: Bash #54: egrep -l '^[^#].*mdadm (-I|--incremental)' /lib/udev/rules.d
2022-03-14 09:12:24.404 DBG default: SErr #54: "grep: /lib/udev/rules.d: Is a directory\n"
2022-03-14 09:12:24.404 DBG default: Exit #54: 2 QProcess::NormalExit
2022-03-14 09:12:24.404 DBG default: Exec #55: rm -f /run/udev/rules.d/91-mx-udisks-inhibit.rules
2022-03-14 09:12:24.409 DBG default: Exit #55: 0 QProcess::NormalExit
2022-03-14 09:12:24.409 DBG default: Exec #56: udevadm control --reload
2022-03-14 09:12:24.419 DBG default: Exit #56: 0 QProcess::NormalExit
2022-03-14 09:12:24.419 DBG default: Exec #57: partprobe -s
2022-03-14 09:12:24.685 DBG default: SOut #57: "/dev/sda: gpt partitions 1 2\n/dev/sdb: msdos partitions 1 2\n/dev/nvme0n1: gpt partitions 1 2 3 4\n/dev/nvme1n1: gpt partitions 1 2 3 4 5\n"
2022-03-14 09:12:24.686 DBG default: Exit #57: 0 QProcess::NormalExit
2022-03-14 09:12:24.688 DBG default: Sleep #1: 1000ms
2022-03-14 09:12:25.639 DBG default: Sleep #1: exit 0
2022-03-14 09:12:25.639 DBG default: << bool MInstall::copyLinux() >>
2022-03-14 09:12:25.640 DBG default: ++ Copying new system ++
2022-03-14 09:12:25.643 DBG default: Exec COPY: /bin/cp -av /live/aufs/boot /live/aufs/bin /live/aufs/dev /live/aufs/etc /live/aufs/lib /live/aufs/libx32 /live/aufs/lib64 /live/aufs/media /live/aufs/mnt /live/aufs/opt /live/aufs/root /live/aufs/sbin /live/aufs/usr /live/aufs/var /live/aufs/home /mnt/antiX
2022-03-14 09:15:47.888 DBG default: Exit COPY: 0 QProcess::NormalExit
2022-03-14 09:15:47.888 DBG default: ++ Fixing configuration ++
2022-03-14 09:15:47.891 DBG default: Bash #58: /usr/sbin/live-to-installed /mnt/antiX
2022-03-14 09:15:47.982 DBG default: SErr #58: "find: \xE2\x80\x98/mnt/antiX/home/*/Desktop/Installer.desktop\xE2\x80\x99: No such file or directory\nfind: \xE2\x80\x98/mnt/antiX/home/*//.idesktop/gazelle.lnk\xE2\x80\x99: No such file or directory\n"
2022-03-14 09:15:47.982 DBG default: Exit #58: 0 QProcess::NormalExit
2022-03-14 09:15:47.982 DBG default: Desktop menu
2022-03-14 09:15:47.982 DBG default: Exec #59: chroot /mnt/antiX desktop-menu --write-out-global
2022-03-14 09:15:47.988 DBG default: SErr #59: "/usr/sbin/chroot: failed to run command \xE2\x80\x98""desktop-menu\xE2\x80\x99: No such file or directory\n"
2022-03-14 09:15:47.988 DBG default: Exit #59: 127 QProcess::NormalExit
2022-03-14 09:15:47.988 DBG default: Creating fstab entry for: "/" "/dev/nvme0n1p2"
2022-03-14 09:15:47.988 DBG default: Exec #60: blkid -o value UUID -s UUID /dev/nvme0n1p2
2022-03-14 09:15:48.002 DBG default: Exit #60: 0 QProcess::NormalExit
2022-03-14 09:15:48.002 DBG default: Exec #61: blkid /dev/nvme0n1p2 -o value -s TYPE
2022-03-14 09:15:48.007 DBG default: Exit #61: 0 QProcess::NormalExit
2022-03-14 09:15:48.007 DBG default: Creating fstab entry for: "SWAP" "/dev/nvme0n1p4"
2022-03-14 09:15:48.007 DBG default: Exec #62: blkid -o value UUID -s UUID /dev/nvme0n1p4
2022-03-14 09:15:48.014 DBG default: Exit #62: 0 QProcess::NormalExit
2022-03-14 09:15:48.014 DBG default: Exec #63: blkid /dev/nvme0n1p4 -o value -s TYPE
2022-03-14 09:15:48.020 DBG default: Exit #63: 0 QProcess::NormalExit
2022-03-14 09:15:48.021 DBG default: Exec #64: blkid -o value UUID -s UUID /dev/nvme0n1p1
2022-03-14 09:15:48.029 DBG default: Exit #64: 0 QProcess::NormalExit
2022-03-14 09:15:48.030 DBG default: Exec #65: /bin/rm -rf /mnt/antiX/home/demo
2022-03-14 09:15:48.034 DBG default: Exit #65: 0 QProcess::NormalExit
2022-03-14 09:15:48.035 DBG default: Bash #66: /bin/rmdir --ignore-fail-on-non-empty /mnt/antiX/media/sd*
2022-03-14 09:15:48.040 DBG default: SErr #66: "/bin/rmdir: failed to remove '/mnt/antiX/media/sd*': No such file or directory\n"
2022-03-14 09:15:48.040 DBG default: Exit #66: 1 QProcess::NormalExit
2022-03-14 09:15:48.040 DBG default: Bash #67: guess-hwclock
2022-03-14 09:15:49.295 DBG default: Exit #67: 0 QProcess::NormalExit
2022-03-14 09:15:49.295 DBG default: Exec #68: /bin/mount --rbind --make-rslave /dev /mnt/antiX/dev
2022-03-14 09:15:49.310 DBG default: Exit #68: 0 QProcess::NormalExit
2022-03-14 09:15:49.310 DBG default: Exec #69: chroot /mnt/antiX rm /var/lib/dbus/machine-id /etc/machine-id
2022-03-14 09:15:49.321 DBG default: Exit #69: 0 QProcess::NormalExit
2022-03-14 09:15:49.321 DBG default: Exec #70: chroot /mnt/antiX dbus-uuidgen --ensure=/etc/machine-id
2022-03-14 09:15:49.331 DBG default: Exit #70: 0 QProcess::NormalExit
2022-03-14 09:15:49.331 DBG default: Exec #71: chroot /mnt/antiX dbus-uuidgen --ensure
2022-03-14 09:15:49.342 DBG default: Exit #71: 0 QProcess::NormalExit
2022-03-14 09:15:49.342 DBG default: Exec #72: /bin/umount -R /mnt/antiX/dev
2022-03-14 09:15:49.353 DBG default: Exit #72: 0 QProcess::NormalExit
2022-03-14 09:15:49.357 DBG default: ++ Setting system configuration ++
2022-03-14 09:15:49.360 DBG default: Bash #73: lspci -n | grep -qE '80ee:beef|80ee:cafe'
2022-03-14 09:15:49.416 DBG default: Exit #73: 1 QProcess::NormalExit
2022-03-14 09:15:49.416 DBG default: Bash #74: /bin/mv -f /mnt/antiX/etc/rc5.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc5.d/K01virtualbox-guest-utils >/dev/null 2>&1
2022-03-14 09:15:49.422 DBG default: Exit #74: 1 QProcess::NormalExit
2022-03-14 09:15:49.422 DBG default: Bash #75: /bin/mv -f /mnt/antiX/etc/rc4.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc4.d/K01virtualbox-guest-utils >/dev/null 2>&1
2022-03-14 09:15:49.429 DBG default: Exit #75: 1 QProcess::NormalExit
2022-03-14 09:15:49.429 DBG default: Bash #76: /bin/mv -f /mnt/antiX/etc/rc3.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc3.d/K01virtualbox-guest-utils >/dev/null 2>&1
2022-03-14 09:15:49.436 DBG default: Exit #76: 1 QProcess::NormalExit
2022-03-14 09:15:49.436 DBG default: Bash #77: /bin/mv -f /mnt/antiX/etc/rc2.d/S*virtualbox-guest-utils /mnt/antiX/etc/rc2.d/K01virtualbox-guest-utils >/dev/null 2>&1
2022-03-14 09:15:49.442 DBG default: Exit #77: 1 QProcess::NormalExit
2022-03-14 09:15:49.442 DBG default: Bash #78: /bin/mv -f /mnt/antiX/etc/rcS.d/S*virtualbox-guest-x11 /mnt/antiX/etc/rcS.d/K21virtualbox-guest-x11 >/dev/null 2>&1
2022-03-14 09:15:49.448 DBG default: Exit #78: 1 QProcess::NormalExit
2022-03-14 09:15:49.448 DBG default: Set chroot: /mnt/antiX
2022-03-14 09:15:49.450 DBG default: Set service: "anacron" true
2022-03-14 09:15:49.450 DBG default: Exec #79: update-rc.d anacron " defaults"
2022-03-14 09:15:49.462 DBG default: SErr #79: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.462 DBG default: Exit #79: 1 QProcess::NormalExit
2022-03-14 09:15:49.462 DBG default: Exec #80: systemctl enable anacron
2022-03-14 09:15:49.532 DBG default: SErr #80: "Synchronizing state of anacron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable anacron\n"
2022-03-14 09:15:49.533 DBG default: Exit #80: 0 QProcess::NormalExit
2022-03-14 09:15:49.533 DBG default: Set service: "cron" true
2022-03-14 09:15:49.533 DBG default: Exec #81: update-rc.d cron " defaults"
2022-03-14 09:15:49.542 DBG default: SErr #81: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.542 DBG default: Exit #81: 1 QProcess::NormalExit
2022-03-14 09:15:49.542 DBG default: Exec #82: systemctl enable cron
2022-03-14 09:15:49.599 DBG default: SErr #82: "Synchronizing state of cron.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cron\n"
2022-03-14 09:15:49.599 DBG default: Exit #82: 0 QProcess::NormalExit
2022-03-14 09:15:49.599 DBG default: Set service: "sudo" true
2022-03-14 09:15:49.599 DBG default: Exec #83: update-rc.d sudo " defaults"
2022-03-14 09:15:49.609 DBG default: SErr #83: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.609 DBG default: Exit #83: 1 QProcess::NormalExit
2022-03-14 09:15:49.609 DBG default: Exec #84: systemctl enable sudo
2022-03-14 09:15:49.615 DBG default: SErr #84: "Failed to look up unit file state: Invalid argument\n"
2022-03-14 09:15:49.615 DBG default: Exit #84: 1 QProcess::NormalExit
2022-03-14 09:15:49.615 DBG default: Set service: "cpufrequtils" true
2022-03-14 09:15:49.615 DBG default: Exec #85: update-rc.d cpufrequtils " defaults"
2022-03-14 09:15:49.625 DBG default: SErr #85: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.625 DBG default: Exit #85: 1 QProcess::NormalExit
2022-03-14 09:15:49.625 DBG default: Exec #86: systemctl enable cpufrequtils
2022-03-14 09:15:49.684 DBG default: SErr #86: "cpufrequtils.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cpufrequtils\n"
2022-03-14 09:15:49.684 DBG default: Exit #86: 0 QProcess::NormalExit
2022-03-14 09:15:49.684 DBG default: Set service: "smartmontools" true
2022-03-14 09:15:49.684 DBG default: Exec #87: update-rc.d smartmontools " defaults"
2022-03-14 09:15:49.694 DBG default: SErr #87: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.694 DBG default: Exit #87: 1 QProcess::NormalExit
2022-03-14 09:15:49.694 DBG default: Exec #88: systemctl enable smartmontools
2022-03-14 09:15:49.752 DBG default: SErr #88: "Synchronizing state of smartmontools.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smartmontools\n"
2022-03-14 09:15:49.752 DBG default: Exit #88: 0 QProcess::NormalExit
2022-03-14 09:15:49.752 DBG default: Set service: "acpid" true
2022-03-14 09:15:49.752 DBG default: Exec #89: update-rc.d acpid " defaults"
2022-03-14 09:15:49.762 DBG default: SErr #89: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.762 DBG default: Exit #89: 1 QProcess::NormalExit
2022-03-14 09:15:49.762 DBG default: Exec #90: systemctl enable acpid
2022-03-14 09:15:49.820 DBG default: SErr #90: "Synchronizing state of acpid.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable acpid\n"
2022-03-14 09:15:49.820 DBG default: Exit #90: 0 QProcess::NormalExit
2022-03-14 09:15:49.820 DBG default: Set service: "hddtemp" true
2022-03-14 09:15:49.820 DBG default: Exec #91: update-rc.d hddtemp " defaults"
2022-03-14 09:15:49.830 DBG default: SErr #91: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.830 DBG default: Exit #91: 1 QProcess::NormalExit
2022-03-14 09:15:49.830 DBG default: Exec #92: systemctl enable hddtemp
2022-03-14 09:15:49.886 DBG default: SErr #92: "hddtemp.service is not a native service, redirecting to systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable hddtemp\n"
2022-03-14 09:15:49.886 DBG default: Exit #92: 0 QProcess::NormalExit
2022-03-14 09:15:49.886 DBG default: Set service: "dbus" true
2022-03-14 09:15:49.886 DBG default: Exec #93: update-rc.d dbus " defaults"
2022-03-14 09:15:49.897 DBG default: SErr #93: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.897 DBG default: Exit #93: 1 QProcess::NormalExit
2022-03-14 09:15:49.897 DBG default: Exec #94: systemctl enable dbus
2022-03-14 09:15:49.959 DBG default: SErr #94: "Synchronizing state of dbus.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable dbus\nThe unit files have no installation config (WantedBy=, RequiredBy=, Also=,\nAlias= settings in the [Install] section, and DefaultInstance= for template\nunits). This means they are not meant to be enabled using systemctl.\n \nPossible reasons for having this kind of units are:\n\xE2\x80\xA2 A unit may be statically enabled by being symlinked from another unit's\n  .wants/ or .requires/ directory.\n\xE2\x80\xA2 A unit's purpose may be to act as a helper for some other unit which has\n  a requirement dependency on it.\n\xE2\x80\xA2 A unit may be started when needed via activation (socket, path, timer,\n  D-Bus, udev, scripted systemctl call, ...).\n\xE2\x80\xA2 In case of template units, the unit is meant to be enabled with some\n  instance name specified.\n"
2022-03-14 09:15:49.959 DBG default: Exit #94: 0 QProcess::NormalExit
2022-03-14 09:15:49.959 DBG default: Set service: "saned" true
2022-03-14 09:15:49.959 DBG default: Exec #95: update-rc.d saned " defaults"
2022-03-14 09:15:49.968 DBG default: SErr #95: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.968 DBG default: Exit #95: 1 QProcess::NormalExit
2022-03-14 09:15:49.969 DBG default: Exec #96: systemctl enable saned
2022-03-14 09:15:49.975 DBG default: SErr #96: "Failed to look up unit file state: Invalid argument\n"
2022-03-14 09:15:49.975 DBG default: Exit #96: 1 QProcess::NormalExit
2022-03-14 09:15:49.975 DBG default: Set service: "haveged" true
2022-03-14 09:15:49.975 DBG default: Exec #97: update-rc.d haveged " defaults"
2022-03-14 09:15:49.985 DBG default: SErr #97: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:49.985 DBG default: Exit #97: 1 QProcess::NormalExit
2022-03-14 09:15:49.985 DBG default: Exec #98: systemctl enable haveged
2022-03-14 09:15:50.044 DBG default: SErr #98: "Synchronizing state of haveged.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable haveged\n"
2022-03-14 09:15:50.044 DBG default: Exit #98: 0 QProcess::NormalExit
2022-03-14 09:15:50.044 DBG default: Set service: "bluetooth" true
2022-03-14 09:15:50.044 DBG default: Exec #99: update-rc.d bluetooth " defaults"
2022-03-14 09:15:50.054 DBG default: SErr #99: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:50.054 DBG default: Exit #99: 1 QProcess::NormalExit
2022-03-14 09:15:50.054 DBG default: Exec #100: systemctl enable bluetooth
2022-03-14 09:15:50.117 DBG default: SErr #100: "Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable bluetooth\n"
2022-03-14 09:15:50.117 DBG default: Exit #100: 0 QProcess::NormalExit
2022-03-14 09:15:50.117 DBG default: Set service: "rsync" true
2022-03-14 09:15:50.117 DBG default: Exec #101: update-rc.d rsync " defaults"
2022-03-14 09:15:50.127 DBG default: SErr #101: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:50.127 DBG default: Exit #101: 1 QProcess::NormalExit
2022-03-14 09:15:50.127 DBG default: Exec #102: systemctl enable rsync
2022-03-14 09:15:50.185 DBG default: SErr #102: "Synchronizing state of rsync.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable rsync\n"
2022-03-14 09:15:50.185 DBG default: Exit #102: 0 QProcess::NormalExit
2022-03-14 09:15:50.185 DBG default: Set service: "cups" true
2022-03-14 09:15:50.185 DBG default: Exec #103: update-rc.d cups " defaults"
2022-03-14 09:15:50.195 DBG default: SErr #103: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:50.195 DBG default: Exit #103: 1 QProcess::NormalExit
2022-03-14 09:15:50.195 DBG default: Exec #104: systemctl enable cups
2022-03-14 09:15:50.254 DBG default: SErr #104: "Synchronizing state of cups.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable cups\n"
2022-03-14 09:15:50.254 DBG default: Exit #104: 0 QProcess::NormalExit
2022-03-14 09:15:50.254 DBG default: Set service: "smbd" true
2022-03-14 09:15:50.254 DBG default: Exec #105: update-rc.d smbd " defaults"
2022-03-14 09:15:50.265 DBG default: SErr #105: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:50.265 DBG default: Exit #105: 1 QProcess::NormalExit
2022-03-14 09:15:50.265 DBG default: Exec #106: systemctl enable smbd
2022-03-14 09:15:50.323 DBG default: SErr #106: "Synchronizing state of smbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable smbd\n"
2022-03-14 09:15:50.323 DBG default: Exit #106: 0 QProcess::NormalExit
2022-03-14 09:15:50.323 DBG default: Set service: "nmbd" true
2022-03-14 09:15:50.323 DBG default: Exec #107: update-rc.d nmbd " defaults"
2022-03-14 09:15:50.333 DBG default: SErr #107: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:50.333 DBG default: Exit #107: 1 QProcess::NormalExit
2022-03-14 09:15:50.333 DBG default: Exec #108: systemctl enable nmbd
2022-03-14 09:15:50.390 DBG default: SErr #108: "Synchronizing state of nmbd.service with SysV service script with /lib/systemd/systemd-sysv-install.\nExecuting: /lib/systemd/systemd-sysv-install enable nmbd\n"
2022-03-14 09:15:50.391 DBG default: Exit #108: 0 QProcess::NormalExit
2022-03-14 09:15:50.391 DBG default: Set service: "samba-ad-dc" true
2022-03-14 09:15:50.391 DBG default: Exec #109: update-rc.d samba-ad-dc " defaults"
2022-03-14 09:15:50.400 DBG default: SErr #109: "usage: update-rc.d [-f] <basename> remove\n       update-rc.d [-f] <basename> defaults\n       update-rc.d [-f] <basename> defaults-disabled\n       update-rc.d <basename> disable|enable [S|2|3|4|5]\n\t\t-f: force\n\nThe disable|enable API is not stable and might change in the future.\n"
2022-03-14 09:15:50.400 DBG default: Exit #109: 1 QProcess::NormalExit
2022-03-14 09:15:50.400 DBG default: Exec #110: systemctl enable samba-ad-dc
2022-03-14 09:15:50.406 DBG default: SErr #110: "Failed to look up unit file state: Invalid argument\n"
2022-03-14 09:15:50.406 DBG default: Exit #110: 1 QProcess::NormalExit
2022-03-14 09:15:50.406 DBG default: End chroot: /mnt/antiX
2022-03-14 09:15:50.408 DBG default: Exec #111: sed -i s/WORKGROUP/Workgroup/g /mnt/antiX/etc/samba/smb.conf
2022-03-14 09:15:50.413 DBG default: Exit #111: 0 QProcess::NormalExit
2022-03-14 09:15:50.414 DBG default: Bash #112: sed -i 's/'"$(grep 127.0.0.1 /etc/hosts | grep -v localhost | head -1 | awk '{print $2}')"'/Asus-Linux/' /mnt/antiX/etc/hosts
2022-03-14 09:15:50.459 DBG default: Exit #112: 0 QProcess::NormalExit
2022-03-14 09:15:50.459 DBG default: Bash #113: echo "Asus-Linux" | cat > /mnt/antiX/etc/hostname
2022-03-14 09:15:50.473 DBG default: Exit #113: 0 QProcess::NormalExit
2022-03-14 09:15:50.473 DBG default: Bash #114: echo "Asus-Linux" | cat > /mnt/antiX/etc/mailname
2022-03-14 09:15:50.481 DBG default: Exit #114: 0 QProcess::NormalExit
2022-03-14 09:15:50.481 DBG default: Bash #115: sed -i 's/.*send host-name.*/send host-name "Asus-Linux";/g' /mnt/antiX/etc/dhcp/dhclient.conf
2022-03-14 09:15:50.489 DBG default: Exit #115: 0 QProcess::NormalExit
2022-03-14 09:15:50.489 DBG default: Bash #116: echo "Asus-Linux" | cat > /mnt/antiX/etc/defaultdomain
2022-03-14 09:15:50.496 DBG default: Exit #116: 0 QProcess::NormalExit
2022-03-14 09:15:50.496 DBG default: << void MInstall::setLocale() >>
2022-03-14 09:15:50.496 DBG default: Update locale
2022-03-14 09:15:50.496 DBG default: Bash #117: chroot /mnt/antiX /usr/sbin/update-locale "LANG=en_US.UTF-8"
2022-03-14 09:15:50.512 DBG default: Exit #117: 0 QProcess::NormalExit
2022-03-14 09:15:50.512 DBG default: Exec #118: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /mnt/antiX/etc/localtime
2022-03-14 09:15:50.518 DBG default: Exit #118: 0 QProcess::NormalExit
2022-03-14 09:15:50.518 DBG default: Exec #119: /bin/ln -nfs /usr/share/zoneinfo/Europe/Berlin /etc/localtime
2022-03-14 09:15:50.523 DBG default: Exit #119: 0 QProcess::NormalExit
2022-03-14 09:15:50.523 DBG default: Bash #120: echo Europe/Berlin > /mnt/antiX/etc/timezone
2022-03-14 09:15:50.529 DBG default: Exit #120: 0 QProcess::NormalExit
2022-03-14 09:15:50.529 DBG default: Bash #121: echo Europe/Berlin > /etc/timezone
2022-03-14 09:15:50.535 DBG default: Exit #121: 0 QProcess::NormalExit
2022-03-14 09:15:50.535 DBG default: Bash #122: echo '0.0 0 0.0
0
LOCAL' > /etc/adjtime
2022-03-14 09:15:50.541 DBG default: Exit #122: 0 QProcess::NormalExit
2022-03-14 09:15:50.541 DBG default: Exec #123: hwclock --hctosys
2022-03-14 09:15:51.000 DBG default: Exit #123: 0 QProcess::NormalExit
2022-03-14 09:15:51.000 DBG default: Exec #124: /bin/cp "-f /etc/adjtime" /mnt/antiX/etc/
2022-03-14 09:15:51.010 DBG default: SErr #124: "/bin/cp: invalid option -- ' '\nTry '/bin/cp --help' for more information.\n"
2022-03-14 09:15:51.010 DBG default: Exit #124: 1 QProcess::NormalExit
2022-03-14 09:15:51.010 DBG default: Exec #125: /bin/cp "-f /etc/default/rcS" /mnt/antiX/etc/default
2022-03-14 09:15:51.015 DBG default: SErr #125: "/bin/cp: invalid option -- ' '\nTry '/bin/cp --help' for more information.\n"
2022-03-14 09:15:51.015 DBG default: Exit #125: 1 QProcess::NormalExit
2022-03-14 09:15:51.015 DBG default: Bash #126: sed -i '/data0=/c\data0=%H:%M' /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2022-03-14 09:15:51.022 DBG default: SErr #126: "sed: can't read /home/demo/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2022-03-14 09:15:51.022 DBG default: Exit #126: 2 QProcess::NormalExit
2022-03-14 09:15:51.022 DBG default: Bash #127: sed -i '/data0=/c\data0=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc
2022-03-14 09:15:51.029 DBG default: SErr #127: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/xfce4-orageclock-plugin-1.rc: No such file or directory\n"
2022-03-14 09:15:51.029 DBG default: Exit #127: 2 QProcess::NormalExit
2022-03-14 09:15:51.029 DBG default: Bash #128: sed -i '/time_format=/c\time_format=%H:%M' /home/demo/.config/xfce4/panel/datetime-1.rc
2022-03-14 09:15:51.035 DBG default: SErr #128: "sed: can't read /home/demo/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2022-03-14 09:15:51.035 DBG default: Exit #128: 2 QProcess::NormalExit
2022-03-14 09:15:51.035 DBG default: Bash #129: sed -i '/time_format=/c\time_format=%H:%M' /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc
2022-03-14 09:15:51.042 DBG default: SErr #129: "sed: can't read /mnt/antiX/etc/skel/.config/xfce4/panel/datetime-1.rc: No such file or directory\n"
2022-03-14 09:15:51.042 DBG default: Exit #129: 2 QProcess::NormalExit
2022-03-14 09:15:51.043 DBG default: Bash #130: sed -i '/use24hFormat=/c\use24hFormat=2' /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc
2022-03-14 09:15:51.050 DBG default: SErr #130: "sed: can't read /home/demo/.config/plasma-org.kde.plasma.desktop-appletsrc: No such file or directory\n"
2022-03-14 09:15:51.050 DBG default: Exit #130: 2 QProcess::NormalExit
2022-03-14 09:15:51.050 DBG default: Bash #131: sed -i '/use24hFormat=/c\use24hFormat=2' /mnt/antiX/etc/skel/.config/plasma-org.kde.plasma.desktop-appletsrc
2022-03-14 09:15:51.060 DBG default: Exit #131: 0 QProcess::NormalExit
2022-03-14 09:15:51.060 DBG default: Bash #132: sed -i 's/%H:%M/%H:%M/g' /mnt/antiX/etc/skel/.icewm/preferences
2022-03-14 09:15:51.067 DBG default: SErr #132: "sed: can't read /mnt/antiX/etc/skel/.icewm/preferences: No such file or directory\n"
2022-03-14 09:15:51.068 DBG default: Exit #132: 2 QProcess::NormalExit
2022-03-14 09:15:51.068 DBG default: Bash #133: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.fluxbox/init
2022-03-14 09:15:51.075 DBG default: SErr #133: "sed: can't read /mnt/antiX/etc/skel/.fluxbox/init: No such file or directory\n"
2022-03-14 09:15:51.075 DBG default: Exit #133: 2 QProcess::NormalExit
2022-03-14 09:15:51.075 DBG default: Bash #134: sed -i 's/%k:%M/%k:%M/g' /mnt/antiX/etc/skel/.jwm/tray
2022-03-14 09:15:51.081 DBG default: SErr #134: "sed: can't read /mnt/antiX/etc/skel/.jwm/tray: No such file or directory\n"
2022-03-14 09:15:51.081 DBG default: Exit #134: 2 QProcess::NormalExit
2022-03-14 09:15:51.081 DBG default: Localize repo
2022-03-14 09:15:51.081 DBG default: Exec #135: chroot /mnt/antiX localize-repo default
2022-03-14 09:15:51.126 DBG default: Exit #135: 0 QProcess::NormalExit
2022-03-14 09:15:51.126 DBG default: Set chroot: /mnt/antiX
2022-03-14 09:15:51.129 DBG default: Exec #136: chpasswd
2022-03-14 09:15:51.151 DBG default: SErr #136: "chpasswd: (user demo) pam_chauthtok() failed, error:\nAuthentication token manipulation error\nchpasswd: (line 2, user demo) password not changed\n"
2022-03-14 09:15:51.151 DBG default: Exit #136: 1 QProcess::NormalExit
2022-03-14 09:15:51.151 DBG default: -- FAILED Phase 3 - Failed to set user account passwords. --
2022-03-14 09:16:02.510 DBG default: << void MInstall::cleanup(bool) >>
2022-03-14 09:16:02.510 DBG default: Exec #137: /bin/umount -l /mnt/antiX/boot/efi
2022-03-14 09:16:02.554 DBG default: SErr #137: "umount: /mnt/antiX/boot/efi: umount failed: No such file or directory.\n"
2022-03-14 09:16:02.554 DBG default: Exit #137: 32 QProcess::NormalExit
2022-03-14 09:16:02.554 DBG default: Exec #138: /bin/umount -l /mnt/antiX/proc
2022-03-14 09:16:02.560 DBG default: SErr #138: "umount: /mnt/antiX/proc: umount failed: No such file or directory.\n"
2022-03-14 09:16:02.560 DBG default: Exit #138: 32 QProcess::NormalExit
2022-03-14 09:16:02.560 DBG default: Exec #139: /bin/umount -l /mnt/antiX/sys
2022-03-14 09:16:02.566 DBG default: SErr #139: "umount: /mnt/antiX/sys: umount failed: No such file or directory.\n"
2022-03-14 09:16:02.566 DBG default: Exit #139: 32 QProcess::NormalExit
2022-03-14 09:16:02.566 DBG default: Exec #140: /bin/umount -l /mnt/antiX/dev/shm
2022-03-14 09:16:02.572 DBG default: SErr #140: "umount: /mnt/antiX/dev/shm: umount failed: No such file or directory.\n"
2022-03-14 09:16:02.572 DBG default: Exit #140: 32 QProcess::NormalExit
2022-03-14 09:16:02.572 DBG default: Exec #141: /bin/umount -l /mnt/antiX/dev
2022-03-14 09:16:02.579 DBG default: SErr #141: "umount: /mnt/antiX/dev: umount failed: No such file or directory.\n"
2022-03-14 09:16:02.579 DBG default: Exit #141: 32 QProcess::NormalExit
2022-03-14 09:16:02.579 DBG default: Exec #142: swapoff /dev/nvme0n1p4
2022-03-14 09:16:02.585 DBG default: SErr #142: "swapoff: /dev/nvme0n1p4: swapoff failed: No such file or directory\n"
2022-03-14 09:16:02.585 DBG default: Exit #142: 4 QProcess::NormalExit
2022-03-14 09:16:02.585 DBG default: Exec #143: /bin/umount -l /mnt/antiX/
2022-03-14 09:16:02.591 DBG default: SErr #143: "umount: /mnt/antiX/: umount failed: No such file or directory.\n"
2022-03-14 09:16:02.591 DBG default: Exit #143: 32 QProcess::NormalExit

#36 Post by **fehlix** » Mon Mar 14, 2022 6:26 am

Yes, the same issue of the non-existin user "demo"

Code: Select all

Exec #137: passwd -d demo
SErr #137: "passwd: user 'demo' does not exist\n"
Exit #137: 1 QProcess::NormalExit
-- FAILED Phase 3 - Failed to set user account passwords. --
<< void MInstall::cleanup(bool) >>

Now, as we still within investigation / debug mode:
Would you might following me this way. The idea: We circumvent the problematic area where it tries to create/adjust users, by doing this:
* Logout
* Press Ctrl+Alt+F1 to go the VT1 console
* login as "root"
* On command line remove existing user:
* remove user demo, type

Code: Select all

deluser demo

Remove home directory of user demo:

Code: Select all

rm -r /home/demo

You should now have no other user left.
Check you have no other user left with

Code: Select all

grep 100.: /etc/passwd

which should be no output
rm any other directory under /home

Code: Select all

rm -r /home/*

Now; Do create the one user you want on installed system.
Example username "stefan"

Code: Select all

adduser stefan

enter password and hit enter until it is ready.
We have now a new user.
Go back to VT7 on the login screen. ( Press Ctrl+Alt+F7 or just ALt+F7 )
Select login as different user and type the new user name "stefan", in case it still shows demo-user.
Now run installer again, it should not ask for a new user, but instead just copies existing user "stefan" into the installed system.

#37 Post by **SIttner76** » Mon Mar 14, 2022 8:14 am

fehlix wrote: Mon Mar 14, 2022 6:26 am Now, as we still within investigation / debug mode:
Would you might following me this way. The idea: We circumvent the problematic area where it tries to create/adjust users, by doing this:

This did not go well... Unfortunately the commands didn't do what you hoped for (see below). When I logged back in as "stefan" I then found myself not in my desktop but back in the original ISO installer desktop. I then started the installer, which went through without error but it did not install my snapshot but rather the original version. Or better put, a hybrid version which contains the programmes I added but everything else looked like booting from the vanilla installer.

#38 Post by **fehlix** » Mon Mar 14, 2022 9:00 am

SIttner76 wrote: Mon Mar 14, 2022 8:14 am
fehlix wrote: Mon Mar 14, 2022 6:26 am Now, as we still within investigation / debug mode:
Would you might following me this way. The idea: We circumvent the problematic area where it tries to create/adjust users, by doing this:
This did not go well... Unfortunately the commands didn't do what you hoped for (see below). When I logged back in as "stefan" I then found myself not in my desktop but back in the original ISO installer desktop. I then started the installer, which went through without error but it did not install my snapshot but rather the original version. Or better put, a hybrid version which contains the programmes I added but everything else looked like booting from the vanilla installer.

OK, so within a sense worked as it should be. Ignore the unmount issue of Live-usb-staorage. B/c we know now the installer should not have stopped to have you to create a user, which normal would only be shown with "general" snapshot and not a personal. And as you did not mentioned to have created a personal snapshot, assumption was you have created a general snapshot (with the default user demo), e.g with adjusted /etc/skel to get the user populated the home. So I guess something wonky with the personal snapshot which may confuse the installer.

#39 Post by **SIttner76** » Mon Mar 14, 2022 10:26 am

fehlix wrote: Mon Mar 14, 2022 9:00 am OK, so within a sense worked as it should be. Ignore the unmount issue of Live-usb-staorage. B/c we know now the installer should not have stopped to have you to create a user, which normal would only be shown with "general" snapshot and not a personal. And as you did not mentioned to have created a personal snapshot, assumption was you have created a general snapshot (with the default user demo), e.g with adjusted /etc/skel to get the user populated the home. So I guess something wonky with the personal snapshot which may confuse the installer.

Sorry for the confusion about the general/personal snapshot. Yes, this has always been about installing a personal snapshot. So you mean to say that during such an installation there should not even be a step for creating a user?
I created the snapshot with the default options, with me as the single user. Nothing special really. As I wrote above, the same error happens also with the (personal) snapshots of a different installation, so this does not look like a one-off problem.

#40 Post by **dolphin_oracle** » Mon Mar 14, 2022 10:28 am

@Adrian @AK-47

MX Linux Forum

Installing Snapshot always fails with "failed to set user account password" error [Solved]

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error

Re: Installing Snapshot always fails with "failed to set user account password" error