MX / KDE / Double Commander / SMB share  [Solved]

Help with the version of MX KDE officially released by the Development Team.
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Forum rules
Post Reply
Message
Author
User avatar
~FLOW~
Posts: 294
Joined: Thu May 19, 2022 12:43 pm

Re: MX / KDE / Double Commander / SMB share

#11 Post by ~FLOW~ »

l0dr3 wrote: Fri Dec 15, 2023 8:55 am AFAIK - KDE uses its own implementation called 'kio'? That may be the reason, why it does not work for you?
That is the question ..

Maybe this helps somehow ?

Code: Select all

System:
  Kernel: 6.5.0-1mx-ahs-amd64 [6.5.3-1~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.5.0-1mx-ahs-amd64 root=UUID=<filter> ro
    init=/lib/systemd/systemd
  Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.1_KDE_x64 Libretto
    July 31 2023 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Portable System: Dell product: Inspiron 3542 v: N/A serial: <superuser required> Chassis:
    type: 8 serial: <superuser required>
  Mobo: Dell model: 0926J6 v: A16 serial: <superuser required> UEFI: Dell v: A16 date: 09/02/2020
Battery:
  ID-1: BAT0 charge: 20.7 Wh (100.0%) condition: 20.7/41.4 Wh (50.0%) volts: 16.7 min: 14.8
    model: SANYO DELL 4WY7C45 type: Li-ion serial: <filter> status: full
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
  Device-2: hidpp_battery_1 model: Logitech K520 serial: <filter> charge: 70% (should be ignored)
    rechargeable: yes status: discharging
CPU:
  Info: model: Intel Core i5-4210U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
    note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
    microcode: 0x26
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
  Speed (MHz): avg: 1315 high: 1670 min/max: 800/2700 scaling: driver: intel_cpufreq
    governor: ondemand cores: 1: 1198 2: 1670 3: 1197 4: 1197 bogomips: 13567
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: Split huge pages
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
    filling, PBRSB-eIBRS: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel Haswell-ULT Integrated Graphics vendor: Dell driver: i915 v: kernel arch: Gen-7.5
    process: Intel 22nm built: 2013 ports: active: HDMI-A-1 off: eDP-1 empty: none bus-ID: 00:02.0
    chip-ID: 8086:0a16 class-ID: 0300
  Device-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] vendor: Dell
    driver: N/A alternate: nouveau non-free: series: 390.xx+ status: legacy-active (EOL~late 2022)
    arch: Fermi code: GF1xx process: 40/28nm built: 2010-16 pcie: gen: 1 speed: 2.5 GT/s lanes: 4
    link-max: lanes: 16 bus-ID: 08:00.0 chip-ID: 10de:1140 class-ID: 0302
  Device-3: Suyin Integrated_Webcam_HD type: USB driver: uvcvideo bus-ID: 1-1.5:5
    chip-ID: 064e:9205 class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1280x720 s-dpi: 96 s-size: 337x190mm (13.27x7.48") s-diag: 387mm (15.23")
  Monitor-1: HDMI-A-1 mapped: HDMI-1 pos: primary model: Samsung serial: <filter> built: 2010
    res: 1280x720 hz: 60 dpi: 203 gamma: 1.2 size: 160x90mm (6.3x3.54") diag: 1021mm (40.2")
    ratio: 16:9 modes: max: 1920x1080 min: 720x400
  Monitor-2: eDP-1 note: disabled model: LG Display 0x0456 built: 2014 res: 1280x720 dpi: 101
    gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1366x768
  API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel HD Graphics 4400 (HSW GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Haswell-ULT HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:03.0
    chip-ID: 8086:0a0c class-ID: 0403
  Device-2: Intel 8 Series HD Audio vendor: Dell 8 driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:9c20 class-ID: 0403
  API: ALSA v: k6.5.0-1mx-ahs-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter vendor: Dell driver: ath9k
    v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 168c:0036
    class-ID: 0280
  IF: wlan0 state: down mac: <filter>
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 v: kernel pcie:
    gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 07:00.0 chip-ID: 10ec:8136 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-3: TP-Link UE300 10/100/1000 LAN (ethernet mode) [Realtek RTL8153] type: USB
    driver: r8152 bus-ID: 3-1.4:4 chip-ID: 2357:0601 class-ID: 0000 serial: <filter>
  IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Qualcomm Atheros AR9462 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-1.6:8
    chip-ID: 0cf3:0036 class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 2 state: down bt-service: enabled,running rfk-block:
    hardware: no software: no address: <filter>
  Info: acl-mtu: 1022:8 sco-mtu: 183:5 link-policy: rswitch hold sniff
    link-mode: peripheral accept
Drives:
  Local Storage: total: 2.49 TiB used: 1.5 TiB (60.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SHSS37A240G size: 223.57 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 001B scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital model: WD10JPVX-75JC3T0 size: 931.51 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
    rev: 1A01
  ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Seagate model: Expansion size: 1.36 TiB
    block-size: physical: 4096 B logical: 512 B type: N/A serial: <filter> rev: 0502 scheme: GPT
Partition:
  ID-1: / raw-size: 223.32 GiB size: 218.75 GiB (97.96%) used: 111.94 GiB (51.2%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 5.5 MiB (0.2%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 52.0 C mobo: 50.0 C
  Fan Speeds (RPM): cpu: 0
Repos:
  Packages: pm: dpkg pkgs: 2698 libs: 1556 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
    pm: appimage pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.easyname.at/mxlinux-packages/mx/repo/ bookworm main non-free
    2: deb http://mirror.easyname.at/mxlinux-packages/mx/repo/ bookworm ahs
Info:
  Processes: 239 Uptime: 2h 36m wakeups: 17 Memory: 7.66 GiB used: 5.92 GiB (77.3%) Init: systemd
  v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
MX-23.4 / KDE Plasma 5.27
Kernel: 6.XX

Be patient !!
What seams easy for you now, for a newbie might be a monumental helping hand.
An efficient pack will move as fast as the slowest member.
Top
User avatar
l0dr3
Posts: 463
Joined: Wed Jun 28, 2023 11:06 am

Re: MX / KDE / Double Commander / SMB share

#12 Post by l0dr3 »

I just checked the latest release notes and issues (relating KDE) on github ...
https://github.com/doublecmd/doublecmd/issues/258 ??

HTH, greetz l0dr3
Top
User avatar
fehlix
Developer
Posts: 12903
Joined: Wed Apr 11, 2018 5:09 pm

Re: MX / KDE / Double Commander / SMB share  [Solved]

#13 Post by fehlix »

~FLOW~ wrote: Fri Dec 15, 2023 8:03 am Greetings my excellent friends,
I have a new weird thing for you, maybe you can help me with some tips.
The problem is that I can't access smb from Double Commander.
Maybe you missed to install gvfs-backends,
b/c double commander from mx-repos
doublecmd-qt: 1.0.11-1mx23+1
doublecmd-plugins: 1.0.11-1mx23+1

works here with MX-23 KDE November
and connects to smb or ftp uris.
Top
User avatar
~FLOW~
Posts: 294
Joined: Thu May 19, 2022 12:43 pm

Re: MX / KDE / Double Commander / SMB share

#14 Post by ~FLOW~ »

l0dr3 wrote: Fri Dec 15, 2023 9:43 am I just checked the latest release notes and issues (relating KDE) on github ...
https://github.com/doublecmd/doublecmd/issues/258 ??

HTH, greetz l0dr3
That was the first thing that I did.
In the forum :
The first suggestion using VFS List doesn't work, it asks me for some user credentials but won't let me in whatever I put there, tried both local and network accounts. We do not use network discovery, maybe that's the problem.
And I get this
Screenshot_20231215_165223.png
You do not have the required permissions to view the files attached to this post.
MX-23.4 / KDE Plasma 5.27
Kernel: 6.XX

Be patient !!
What seams easy for you now, for a newbie might be a monumental helping hand.
An efficient pack will move as fast as the slowest member.
Top
User avatar
~FLOW~
Posts: 294
Joined: Thu May 19, 2022 12:43 pm

Re: MX / KDE / Double Commander / SMB share

#15 Post by ~FLOW~ »

fehlix wrote: Fri Dec 15, 2023 9:52 am Maybe you missed to install gvfs-backends,
:spinning: HUUUUUURAAAAAAAAAAAAAAAA !!! :dancingman:
I could kiss you right now !!!!!!!!
That was the problem !!!!
Thank you so much for your effort

So I installed from repos : gvfs-backends
MX-23.4 / KDE Plasma 5.27
Kernel: 6.XX

Be patient !!
What seams easy for you now, for a newbie might be a monumental helping hand.
An efficient pack will move as fast as the slowest member.
Top
Post Reply

Return to “MX KDE Official Release”