Missing Window Settings [Solved]

[chelmi00]

I'm currently using KDE, and I had some issues with. However, after solving everything, I came to notice that my settings for resolution, refresh rate, etc don't appear in the system settings app. On the other hand, in cinnamon they appear, any help?

[richb]

I'm currently using KDE, and I had some issues with. However, after solving everything, I came to notice that my settings for resolution, refresh rate, etc don't appear in the system settings app. On the other hand, in cinnamon they appear, any help?

It appears under Display Manager in System Settings. (Mx 21 with KDE 5.20)

[chelmi00]

I'm currently using KDE, and I had some issues with. However, after solving everything, I came to notice that my settings for resolution, refresh rate, etc don't appear in the system settings app. On the other hand, in cinnamon they appear, any help?

It appears under Display Manager in System Settings. (Mx 21 with KDE 5.20)

Yes, it should, in fact it did. However, I don't know why, it disappeared

[richb]

I would try reinstalling systemsettings and before committing see what other package would get installed.

[chelmi00]

I would try reinstalling systemsettings and before committing see what other package would get installed.

I tried purging the package, however it didn't help, since when I reinstalled, it stays the same. Any idea on what files should I manually remove? Anyhow, I'm also interested in using systemsettings due to how good it is

[dolphin_oracle]

better show your quick-system-info while running KDE.

[chelmi00]

better show your quick-system-info while running KDE.

How can I do this?

[dolphin_oracle]

run the tool from the menu. it should copy the report to the clipboard, already formatted for the forum. just paste into a forum post.

[chelmi00]

run the tool from the menu. it should copy the report to the clipboard, already formatted for the forum. just paste into a forum post.

Code: Select all

System:    Kernel: 5.10.0-14-amd64 x86_64 bits: 64 compiler: gcc v: 10.2.1 
           parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-14-amd64 root=UUID=<filter> ro quiet splash 
           init=/lib/systemd/systemd 
           Desktop: KDE Plasma 5.20.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-21.1_KDE_x64 Wildflower October 20  2021 
           base: Debian GNU/Linux 11 (bullseye) 
Machine:   Type: Laptop System: Timi product: TM1703 v: XMAKB3M0P1B13 serial: <filter> 
           Mobo: Timi model: TM1703 v: XMAKB3M0P1B13 serial: <filter> UEFI: Insyde v: XMAKB3M0P1B13 date: 08/05/2021 
Battery:   ID-1: BAT0 charge: 14.2 Wh (47.3%) condition: 30.0/40.1 Wh (74.8%) volts: 7.4 min: 7.6 model: SUNWODA R13B02W 
           type: Li-ion serial: <filter> status: Discharging 
CPU:       Info: Quad Core model: Intel Core i5-8250U bits: 64 type: MT MCP arch: Kaby Lake note: check family: 6 
           model-id: 8E (142) stepping: A (10) microcode: EC cache: L2: 6 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800 
           Speed: 1453 MHz min/max: 400/3400 MHz Core speeds (MHz): 1: 1453 2: 1274 3: 1383 4: 1293 5: 1591 6: 1280 7: 1193 
           8: 1419 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable 
           Type: mds mitigation: Clear CPU buffers; SMT vulnerable 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort status: Not affected 
Graphics:  Device-1: Intel UHD Graphics 620 vendor: Xiaomi driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:5917 
           class-ID: 0300 
           Device-2: NVIDIA GP108M [GeForce MX150] vendor: Xiaomi driver: nvidia v: 510.47.03 bus-ID: 01:00.0 
           chip-ID: 10de:1d12 class-ID: 0302 
           Device-3: Chicony XiaoMi USB 2.0 Webcam type: USB driver: uvcvideo bus-ID: 1-5:2 chip-ID: 04f2:b5a3 class-ID: 0e02 
           Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: loaded: modesetting,nvidia 
           unloaded: fbdev,nouveau,vesa alternate: nv display-ID: :0 screens: 1 
           Screen-1: 0 s-res: 1440x810 s-dpi: 96 s-size: 380x213mm (15.0x8.4") s-diag: 436mm (17.2") 
           Monitor-1: eDP-1 res: 1440x810 hz: 62 dpi: 124 size: 294x165mm (11.6x6.5") diag: 337mm (13.3") 
           OpenGL: renderer: Mesa Intel UHD Graphics 620 (KBL GT2) v: 4.6 Mesa 21.2.5 direct render: Yes 
Audio:     Device-1: Intel Sunrise Point-LP HD Audio vendor: Xiaomi driver: snd_hda_intel v: kernel alternate: snd_soc_skl 
           bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403 
           Sound Server-1: ALSA v: k5.10.0-14-amd64 running: yes 
           Sound Server-2: PulseAudio v: 14.2 running: yes 
           Sound Server-3: PipeWire v: 0.3.19 running: no 
Network:   Device-1: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel port: 3000 bus-ID: 02:00.0 chip-ID: 8086:24fd 
           class-ID: 0280 
           IF: wlan0 state: up mac: <filter> 
Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:4 chip-ID: 8087:0a2b 
           class-ID: e001 
           Report: hciconfig ID: hci0 rfk-id: 3 state: down bt-service: enabled,running rfk-block: hardware: no software: no 
           address: <filter> 
           Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch hold sniff link-mode: slave accept 
Drives:    Local Storage: total: 715.41 GiB used: 125.8 GiB (17.6%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: MZVLB256HAHQ-00000 size: 238.47 GiB block-size: 
           physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: EXD7101Q temp: 25.9 C 
           scheme: GPT 
           ID-2: /dev/sda maj-min: 8:0 vendor: Intenso model: SSD Sata III size: 476.94 GiB block-size: physical: 512 B 
           logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 1A0 scheme: GPT 
Partition: ID-1: / raw-size: 468.68 GiB size: 460.25 GiB (98.20%) used: 125.33 GiB (27.2%) fs: ext4 dev: /dev/sda3 
           maj-min: 8:3 
           ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 275 KiB (0.1%) fs: vfat dev: /dev/sda1 maj-min: 8:1 
Swap:      Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 8 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2 maj-min: 8:2 
Sensors:   System Temperatures: cpu: 38.0 C mobo: 28.0 C 
           Fan Speeds (RPM): N/A 
Repos:     Packages: apt: 2708 lib: 1445 flatpak: 0 
           No active apt repos in: /etc/apt/sources.list 
           No active apt repos in: /etc/apt/sources.list.d/deadsnakes-ubuntu-ppa-kinetic.list 
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 
           1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list 
           1: deb http://deb.debian.org/debian bullseye main contrib non-free
           2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/kdenlive-ubuntu-kdenlive-stable-jammy.list 
           1: deb http://ppa.launchpad.net/kdenlive/kdenlive-stable/ubuntu jammy main
           No active apt repos in: /etc/apt/sources.list.d/launchpad-ubuntu-ppa-kinetic.list 
           Active apt repos in: /etc/apt/sources.list.d/megasync.list 
           1: deb [signed-by=/usr/share/keyrings/meganz-archive-keyring.gpg] https://mega.nz/linux/repo/Debian_11/ ./
           Active apt repos in: /etc/apt/sources.list.d/microsoft-edge.list 
           1: deb [arch=amd64] https://packages.microsoft.com/repos/edge/ stable main
           Active apt repos in: /etc/apt/sources.list.d/mx.list 
           1: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bullseye main non-free
           2: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bullseye ahs
           Active apt repos in: /etc/apt/sources.list.d/sublime-text.list 
           1: deb https://download.sublimetext.com/ apt/stable/
           Active apt repos in: /etc/apt/sources.list.d/vscode.list 
           1: deb [arch=amd64,arm64,armhf] http://packages.microsoft.com/repos/code stable main
Info:      Processes: 328 Uptime: 2h 4m wakeups: 5 Memory: 7.68 GiB used: 3.81 GiB (49.6%) Init: systemd v: 247 runlevel: 5 
           default: 5 tool: systemctl Compilers: gcc: 10.2.1 alt: 10 Shell: Bash v: 5.1.4 
           running-in: quick-system-info-mx inxi: 3.3.06 
Boot Mode: UEFI

[chelmi00]

I managed to solve it by reinstalling kscreen

Code: Select all

sudo apt reinstall kscreen