Page 1 of 1

kernal panic happens

Posted: Fri Jun 13, 2025 11:42 am
by spidychoi
Hello, I'm using is os for a few days and I loves this os. Since i'm korean i was trying to setup typing for korean. and when I try to do it the kernal panic happens. And Ii don't know why and what causes it. So if you guys need any output post it in the comment. I would love your guys help. (mostly for that reason and sometimes happens randomly and even at when I login).

Re: kernal panic happens

Posted: Fri Jun 13, 2025 11:44 am
by j2mcgreg
We need your computer’s complete profile before we can proceed, so you need to post the output from the QSI utility. The Quick System Info (QSI) utility is located in MX Tools and its output is automatically formatted for use here in the forum. Run the QSI utility, click “Copy for Forum” at the bottom and then just paste it here in your thread.
Forum Rules

Re: kernal panic happens

Posted: Fri Jun 13, 2025 11:26 pm
by spidychoi
here is it

Code: Select all

System:
  Kernel: 6.14.10-2-liquorix-amd64 [6.14-13~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
    intel_pstate=disable amd_pstate=disable BOOT_IMAGE=/boot/vmlinuz-6.14.10-2-liquorix-amd64
    root=UUID=<filter> ro quiet splash crashkernel=384M-:128M
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.6_ahs_x64 Libretto April 13  2025 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: Dell product: Latitude 7390 v: N/A serial: <superuser required> Chassis:
    type: 10 serial: <superuser required>
  Mobo: Dell model: 09386V v: A00 serial: <superuser required> UEFI: Dell v: 1.40.0
    date: 09/05/2024
Battery:
  ID-1: BAT0 charge: 5.3 Wh (23.2%) condition: 22.8/60.0 Wh (38.1%) volts: 7.9 min: 7.6
    model: LGC-LGC7.780 DELL MYJ9689 type: Li-ion serial: <filter> status: charging
CPU:
  Info: model: Intel Core i5-8350U bits: 64 type: MT MCP arch: Coffee Lake gen: core 8 level: v3
    note: check built: 2017 process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 0xA (10)
    microcode: 0xF6
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 1062 high: 1701 min/max: 400/1901 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 1700 2: 1700 3: 400 4: 1700 5: 1701 6: 500
    7: 400 8: 400 bogomips: 30399
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: ghostwrite status: Not affected
  Type: indirect_target_selection status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: old_microcode status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional; RSB filling;
    PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort mitigation: TSX disabled
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Dell driver: i915 v: kernel arch: Gen-9.5
    process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2
    bus-ID: 00:02.0 chip-ID: 8086:5917 class-ID: 0300
  Device-2: Realtek Integrated_Webcam_HD type: USB driver: uvcvideo bus-ID: 1-5:3
    chip-ID: 0bda:58ca class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 509x286mm (20.04x11.26") s-diag: 584mm (22.99")
  Monitor-1: eDP-1 model: AU Optronics 0x462d built: 2016 res: 1920x1080 hz: 60 dpi: 166
    gamma: 1.2 size: 293x165mm (11.54x6.5") diag: 336mm (13.2") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 24.2.8-1mx23ahs renderer: Mesa Intel UHD Graphics 620 (KBL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell driver: snd_hda_intel v: kernel
    alternate: snd_soc_avs,snd_sof_pci_intel_skl bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
  API: ALSA v: k6.14.10-2-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
    chip-ID: 8086:15d7 class-ID: 0200
  IF: eth0 state: down mac: <filter>
  Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel modules: wl pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:24fd class-ID: 0280
  IF: wlan0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-7:4
    chip-ID: 8087:0a2b class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
    sub-v: 100 hci-v: 4.2 rev: 100
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch hold sniff
    link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
    telephony
Drives:
  Local Storage: total: 238.47 GiB used: 13.51 GiB (5.7%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: SK Hynix model: SC311 SATA 256GB size: 238.47 GiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 0P10
    scheme: GPT
Partition:
  ID-1: / raw-size: 238.22 GiB size: 233.43 GiB (97.99%) used: 13.51 GiB (5.8%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 45.0 C pch: 42.5 C mobo: 41.0 C
  Fan Speeds (RPM): cpu: 0
Repos:
  Packages: pm: dpkg pkgs: 2326 libs: 1189 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/hamonikr-jin.list
    1: deb https://apt.hamonikr.org jin main upstream
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb https://mirrors.tuna.tsinghua.edu.cn/mxlinux/mx/repo/ bookworm main non-free
    2: deb https://mirrors.tuna.tsinghua.edu.cn/mxlinux/mx/repo/ bookworm ahs
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.sources
    1: deb [arch=amd64 arm64] https://brave-browser-apt-release.s3.brave.com stable main
Info:
  Processes: 321 Uptime: 25m wakeups: 29438 Memory: 7.64 GiB used: 2.19 GiB (28.7%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI

Re: kernal panic happens

Posted: Sat Jun 14, 2025 1:08 am
by Stevo
You should be able to use the standard Debian 6.1 kernel with that hardware, and it can easily be installed with MXPI/Kernels, followed by a reboot to that kernel.

I'm not saying that will solve the problem, but it's worth seeing if it's restricted to the Liquorix kernel.

Re: kernal panic happens

Posted: Sat Jun 14, 2025 4:17 am
by spidychoi
It happens at every linux distro I tired. I tried ubuntu, arch linux and this os. When I run windows os(24h2) it dosen't have any issue. ubunut if I try to install and see the log of it then it kernal panics.(I was able to succesfully install it without any errors by manual partitioning). So any way to know why this happens?

Re: kernal panic happens

Posted: Sat Jun 14, 2025 4:21 am
by Eadwine Rose
More important now: have you tried what Stevo said?

Re: kernal panic happens

Posted: Sat Jun 14, 2025 5:12 am
by mxrd
Only as idea for testing: did you buy this Laptop used, did someone change some timings in the bios?
Ram exchanged?

Re: kernal panic happens

Posted: Sat Jun 14, 2025 6:07 am
by spidychoi
i'm using Dell Inc. Latitude 7390

Re: kernal panic happens

Posted: Sat Jun 14, 2025 6:28 am
by spidychoi
will inxi -Fnxxz help?

Re: kernal panic happens

Posted: Sat Jun 14, 2025 8:35 am
by j2mcgreg
Try the boot parameter mentioned here:
https://www.reddit.com/r/Ubuntu/comment ... tude_7390/

There is also a firmware update available for your SSD:
https://www.dell.com/support/home/en-us ... erid=j5yr3