Assert from ./src/common/sizer.cpp when starting veracrypt

Help with the version of MX KDE officially released by the Development Team.
When asking for help, use Quick System Info from MX Tools. It will be properly formatted using the following steps.
1. Click on Quick System Info in MX Tools
2. Right click in your post and paste.
Forum rules
Post Reply
Message
Author
alpie
Posts: 12
Joined: Tue Jan 16, 2018 3:07 pm

Assert from ./src/common/sizer.cpp when starting veracrypt

#1 Post by alpie »

On MX KDE I have installed VeraCrypt by: sudo apt-get veracrypt
When I start veracrypt I get an assert from ./src/common/sizer.cpp, see attached image. From the message it seems that the veracrypt developer should do something.
However, since I don't want to see this message every time I start veracrypt, I uncheck Show this dialog next time. Unfortunately that doesn't work, the message keeps popping up everytime I start veracrypt. Is this something in MX KDE?

Image
Top
User avatar
j2mcgreg
Global Moderator
Posts: 6940
Joined: Tue Oct 23, 2007 12:04 pm

Re: Assert from ./src/common/sizer.cpp when starting veracrypt

#2 Post by j2mcgreg »

We need your computer’s complete profile before we can proceed, so you need to post the output from the QSI utility. The Quick System Info (QSI) utility is located in MX Tools and its output is automatically formatted for use here in the forum. Run the QSI utility, click “Copy for Forum” at the bottom and then just paste it here in your thread.
Forum Rules
HP 15; ryzen 3 5300U APU; 500 Gb SSD; 8GB ram
HP 17; ryzen 3 3200; 500 GB SSD; 12 GB ram
Idea Center 3; 12 gen i5; 256 GB ssd;

In Linux, newer isn't always better. The best solution is the one that works.
Top
alpie
Posts: 12
Joined: Tue Jan 16, 2018 3:07 pm

Re: Assert from ./src/common/sizer.cpp when starting veracrypt

#3 Post by alpie »

Code: Select all

System:
  Kernel: 6.1.0-32-amd64 [6.1.129-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-32-amd64 root=UUID=<filter> ro quiet splash
  Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.6_KDE_x64 Libretto Jan
    12 2025 base: Debian GNU/Linux 12 (bookworm)
Machine:
  Type: Laptop System: HP product: HP ProBook 450 G6 v: SBKPF serial: <superuser required> Chassis:
    type: 10 serial: <superuser required>
  Mobo: HP model: 8538 v: KBC Version 51.31.00 serial: <superuser required> UEFI: HP
    v: R71 Ver. 01.26.00 date: 09/24/2023
Battery:
  ID-1: BAT0 charge: 38.0 Wh (100.0%) condition: 38.0/45.2 Wh (83.9%) volts: 12.7 min: 11.6
    model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: full cycles: 118
CPU:
  Info: model: Intel Core i3-8145U bits: 64 type: MT MCP arch: Whiskey Lake gen: core 8 level: v3
    note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 0xB (11)
    microcode: 0xF6
  Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
    desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
  Speed (MHz): avg: 800 min/max: 400/3900 scaling: driver: intel_pstate governor: powersave
    cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 18399
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling mitigation: Microcode
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf status: Not affected
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown status: Not affected
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed mitigation: IBRS
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional; RSB filling;
    PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Hewlett-Packard driver: i915
    v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1
    empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:3ea0 class-ID: 0300
  Device-2: Cheng Uei Precision Industry (Foxlink) HP Wide Vision HD Integrated Webcam type: USB
    driver: uvcvideo bus-ID: 1-2:3 chip-ID: 05c8:03cb class-ID: 0e02
  Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
    loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: AU Optronics 0x23ed built: 2018 res: 1920x1080 hz: 60 dpi: 142
    gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
  API: OpenGL v: 4.6 Mesa 24.2.8-1mx23ahs renderer: Mesa Intel UHD Graphics 620 (WHL GT2)
    direct-render: Yes
Audio:
  Device-1: Intel Cannon Point-LP High Definition Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:9dc8 class-ID: 0403
  API: ALSA v: k6.1.0-32-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Cannon Point-LP CNVi [Wireless-AC] driver: iwlwifi v: kernel modules: wl
    bus-ID: 00:14.3 chip-ID: 8086:9df0 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Hewlett-Packard RTL8111/8168/8411 driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: 3000 bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB driver: btusb v: 0.8
    bus-ID: 1-10:6 chip-ID: 8087:0aaa class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 2 state: down bt-service: N/A rfk-block: hardware: no
    software: yes address: <filter>
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
Drives:
  Local Storage: total: 238.47 GiB used: 34.33 GiB (14.4%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: PC SN520 SDAPNUW-256G-1006
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 15.8 Gb/s lanes: 2 type: SSD
    serial: <filter> rev: 20110006 temp: 32.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 48.83 GiB size: 47.76 GiB (97.81%) used: 17.16 GiB (35.9%) fs: ext4
    dev: /dev/nvme0n1p3 maj-min: 259:3
  ID-2: /boot/efi raw-size: 1000 MiB size: 998 MiB (99.80%) used: 7.2 MiB (0.7%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 3.91 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p2
    maj-min: 259:2
Sensors:
  System Temperatures: cpu: 48.0 C pch: 38.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2570 libs: 1367 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
    pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/dropbox.list
    1: deb [arch=i386,amd64 signed-by=/etc/apt/keyrings/dropbox.asc] http://linux.dropbox.com/debian bookworm main
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://nl.mxrepo.com/mx/repo/ bookworm main non-free
    2: deb http://nl.mxrepo.com/mx/repo/ bookworm ahs
Info:
  Processes: 245 Uptime: 12m wakeups: 2 Memory: 15.5 GiB used: 3.51 GiB (22.6%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Top
Post Reply

Return to “MX KDE Official Release”