Packages using SystemD and SysVinit
Posted: Fri May 09, 2025 7:52 am
Just curious:
Are there packages that only work with SystemD or only works with SysVinit?
I've been using the default SysVinit, but was wondering if I tried SystemD would that affect packages using WINE, Bottles, Flatpaks, appimages?
Are there packages that only work with SystemD or only works with SysVinit?
I've been using the default SysVinit, but was wondering if I tried SystemD would that affect packages using WINE, Bottles, Flatpaks, appimages?
Code: Select all
System: Kernel: 5.10.0-34-amd64 [5.10.234-1] x86_64 bits: 64 compiler: gcc v: 10.2.1
parameters: BOOT_IMAGE=/boot/vmlinuz-5.10.0-34-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce 4.18.1 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm 4.18.0 vt: 7
dm: LightDM 1.26.0 Distro: MX-21.3_x64 Wildflower January 15 2023
base: Debian GNU/Linux 11 (bullseye)
Machine: Type: Laptop System: ASUSTeK product: VivoBook 15_ASUS Laptop X540UAR v: 1.0
serial: <filter>
Mobo: ASUSTeK model: X540UAR v: 1.0 serial: <filter> UEFI: American Megatrends
v: X540UAR.306 date: 08/23/2019
Battery: ID-1: BAT0 charge: 30.0 Wh (97.1%) condition: 30.9/33.2 Wh (93.2%) volts: 10.8
min: 10.8 model: ASUSTeK ASUS Battery type: Li-ion serial: N/A status: Not charging
cycles: 95
CPU: Info: Dual Core model: Intel Core i3-6006U bits: 64 type: MT MCP arch: Skylake
family: 6 model-id: 4E (78) stepping: 3 microcode: F0 cache: L2: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 15999
Speed: 500 MHz min/max: 400/2000 MHz Core speeds (MHz): 1: 500 2: 500 3: 500 4: 500
Vulnerabilities: Type: gather_data_sampling status: Vulnerable: No microcode
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: IBRS, IBPB: conditional, STIBP: conditional, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel Skylake GT2 [HD Graphics 520] vendor: ASUSTeK driver: i915 v: kernel
bus-ID: 00:02.0 chip-ID: 8086:1916 class-ID: 0300
Device-2: Chicony USB2.0 VGA UVC WebCam type: USB driver: uvcvideo bus-ID: 1-6:3
chip-ID: 04f2:b64a class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.18.0 driver:
loaded: modesetting unloaded: fbdev,vesa display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: eDP-1 res: 1366x768 hz: 60 dpi: 101 size: 344x194mm (13.5x7.6")
diag: 395mm (15.5")
OpenGL: renderer: Mesa Intel HD Graphics 520 (SKL GT2) v: 4.6 Mesa 20.3.5
direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel
v: kernel alternate: snd_soc_skl bus-ID: 00:1f.3 chip-ID: 8086:9d70 class-ID: 0403
Sound Server-1: ALSA v: k5.10.0-34-amd64 running: yes
Sound Server-2: PulseAudio v: 14.2 running: yes
Network: Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: AzureWave
driver: ath10k_pci v: kernel modules: wl port: f040 bus-ID: 02:00.0 chip-ID: 168c:0042
class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth: Device-1: IMC Networks type: USB driver: btusb v: 0.8 bus-ID: 1-8:4 chip-ID: 13d3:3496
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: 25a hci-v: 4.2
Info: acl-mtu: 1024:8 sco-mtu: 50:8 link-policy: rswitch hold sniff
link-mode: slave accept service-classes: rendering, capturing, object transfer, audio
Drives: Local Storage: total: 931.51 GiB used: 113.28 GiB (12.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10SPZX-80Z10T2
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD
rpm: 5400 serial: <filter> rev: 1A04 scheme: GPT
Partition: ID-1: / raw-size: 923.25 GiB size: 907.69 GiB (98.31%) used: 113.28 GiB (12.5%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 282 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap: Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 8 GiB used: 1.8 MiB (0.0%) priority: -2
dev: /dev/sda3 maj-min: 8:3
Sensors: System Temperatures: cpu: 36.0 C mobo: N/A
Fan Speeds (RPM): cpu: 1900
Repos: Packages: 2724 note: see --pkg apt: 2705 lib: 1481 flatpak: 19
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
2: deb http://security.debian.org/debian-security/ bullseye-security main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
Active apt repos in: /etc/apt/sources.list.d/microsoft-edge.list
1: deb [arch=amd64] https://packages.microsoft.com/repos/edge/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mxrepo.com/mx/repo/ bullseye main non-free
Active apt repos in: /etc/apt/sources.list.d/winehq-bullseye.sources
1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/debian bullseye main
Info: Processes: 238 Uptime: 7d 1h 38m wakeups: 9 Memory: 7.64 GiB used: 3.68 GiB (48.2%)
Init: SysVinit v: 2.96 runlevel: 5 default: 5 tool: systemctl Compilers: gcc: N/A
alt: 10 Client: shell wrapper v: 5.1.4-release inxi: 3.3.06
Boot Mode: UEFI