mit Mx bin ich eigentlich sehr zufrieden, habe allerdings jetzt ein kleines Problem, das aber wohl nicht an MX liegt.
Code: Select all
System:
Kernel: 6.9.12-amd64 [6.9.12-1~mx23ahs] arch: x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-6.9.12-amd64 root=UUID=<filter> ro splash quiet
Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto October 15 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop Mobo: N/A model: X133 serial: <superuser required> UEFI: American Megatrends
v: M11x_X133_G_P1C12M2A0L13M5T0U1 date: 11/25/2022
CPU:
Info: model: Intel Celeron J4125 bits: 64 type: MCP arch: Goldmont Plus level: v2 built: 2017
process: Intel 14nm family: 6 model-id: 0x7A (122) stepping: 8 microcode: 0x24
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 224 KiB desc: d-4x24 KiB; i-4x32 KiB
L2: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 902 high: 1198 min/max: 800/2700 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 800 2: 1198 3: 800 4: 812 bogomips: 15974
Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling mitigation: Clear Register File
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional; RSB filling;
PBRSB-eIBRS: Not affected; BHI: SW loop, KVM: SW loop
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel GeminiLake [UHD Graphics 600] driver: i915 v: kernel arch: Gen-9
process: Intel 14n built: 2015-16 ports: active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2
bus-ID: 00:02.0 chip-ID: 8086:3185 class-ID: 0300
Device-2: USB Camera type: USB driver: uvcvideo bus-ID: 1-6:4 chip-ID: 32e6:9005 class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 509x286mm (20.04x11.26") s-diag: 584mm (22.99")
Monitor-1: eDP-1 model: BOE Display 0x0900 built: 2019 res: 1920x1080 hz: 60 dpi: 142
gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 23.1.2-1~mx23ahs renderer: Mesa Intel UHD Graphics 600 (GLK 2)
direct-render: Yes
Audio:
Device-1: Intel Celeron/Pentium Silver Processor High Definition Audio
driver: sof-audio-pci-intel-apl alternate: snd_hda_intel, snd_soc_skl, snd_soc_avs,
snd_sof_pci_intel_apl bus-ID: 00:0e.0 chip-ID: 8086:3198 class-ID: 0401
API: ALSA v: k6.9.12-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: off with: 1: pipewire-pulse status: off 2: wireplumber
status: off tools: pw-cat,pw-cli,wpctl
Server-2: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter driver: rtw_8821ce v: N/A
modules: rtw88_8821ce,wl,rtl8821ce pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000
bus-ID: 04:00.0 chip-ID: 10ec:c821 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-7:6 chip-ID: 0bda:c821
class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 2.1 lmp-v: 4.2
sub-v: f098 hci-v: 4.2 rev: 75b8
Info: acl-mtu: 1021:8 sco-mtu: 255:12 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 1.36 TiB used: 464.9 GiB (33.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST500LT012-1DG142 size: 465.76 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: LVM1 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Smart Modular Tech. model: ShiJi 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 6A0
scheme: GPT
Partition:
ID-1: / raw-size: 49.75 GiB size: 48.41 GiB (97.32%) used: 15.1 GiB (31.2%) fs: ext4
dev: /dev/sdb4 maj-min: 8:20
ID-2: /boot/efi raw-size: 997 MiB size: 96 MiB (9.63%) used: 80.2 MiB (83.5%) fs: vfat
dev: /dev/sdb1 maj-min: 8:17
ID-3: /home raw-size: 64.94 GiB size: 63.37 GiB (97.58%) used: 54.8 GiB (86.5%) fs: ext4
dev: /dev/sdb5 maj-min: 8:21
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 5.77 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda4
maj-min: 8:4
Sensors:
System Temperatures: cpu: 53.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2855 pm: dpkg pkgs: 2847 libs: 1596 tools: apt,apt-get,aptitude,nala,synaptic
pm: pacman pkgs: 0 pm: rpm pkgs: 0 pm: flatpak pkgs: 8
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
1: deb [arch=amd64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
Active apt repos in: /etc/apt/sources.list.d/d-apt.list
1: deb https://master.dl.sourceforge.net/project/d-apt/ d-apt main
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/google-earth-pro.list
1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/microsoft-edge.list
1: deb [arch=amd64] https://packages.microsoft.com/repos/edge/ stable main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb https://mirrors.aliyun.com/mxlinux/mx/repo/ bookworm main non-free
Active apt repos in: /etc/apt/sources.list.d/syncthing.list
1: deb https://apt.syncthing.net/ syncthing stable
Active apt repos in: /etc/apt/sources.list.d/teamviewer.list
1: deb [signed-by=/usr/share/keyrings/teamviewer-keyring.gpg] https://linux.teamviewer.com/deb stable main
Active apt repos in: /etc/apt/sources.list.d/winehq-bookworm.sources
1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/debian bookworm main
Info:
Processes: 251 Uptime: 1m wakeups: 2 Memory: 11.53 GiB used: 1.77 GiB (15.4%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFIIch wollte ein paar Dokumente mit Dokument-Scanner einscannen und speichern. Der Scanner wird richtig erkannt, aber beim Anklicken von "scannen" reagiert der Scanner (HP Smart Tank 519) nicht. Es wird gefragt, wohin gespeichert werden soll. Nach Eingabe des Speicherorts wird dort eine leere Datei angelegt, aber der Scanner rührt sich nicht. Es erscheint keine Fehlermeldung.
Vielen Dank schon mal für die Hilfe.
Dee
