I find it strange that the “logout” of Budgie works perfectly with SysVinit in Devuan 5.0 and does not work with Sysvinit in MX-Linux 23...
Where can I look to find out what could be the cause or the difference?
Best regards
Code: Select all
Snapshot created on: 20240126_1812
System:
Kernel: 6.1.0-31-amd64 [6.1.128-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-31-amd64 root=UUID=<filter> ro quiet splash
Desktop: Budgie v: 10.7.1 info: budgie-panel wm: budgie-wm dm: LightDM v: 1.32.0 Distro: Senpai
Respin MX-CLI-23.5_x64 Libretto febrero 22 2025 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Kvm System: QEMU product: Standard PC (Q35 + ICH9, 2009) v: pc-q35-7.2
serial: <superuser required> Chassis: type: 1 v: pc-q35-7.2 serial: <superuser required>
Mobo: N/A model: N/A serial: N/A BIOS: SeaBIOS v: 1.16.2-debian-1.16.2-1 date: 04/01/2014
CPU:
Info: model: AMD Ryzen 5 5500 bits: 64 type: SMP arch: Zen 3 gen: 4 level: v3 note: check
built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
microcode: 0xA50000D
Topology: cpus: 6x cores: 1 smt: <unsupported> cache: L1: 6x 128 KiB (768 KiB)
desc: d-1x64 KiB; i-1x64 KiB L2: 6x 512 KiB (3 MiB) desc: 1x512 KiB L3: 6x 16 MiB (96 MiB)
desc: 1x16 MiB
Speed (MHz): avg: 3600 min/max: N/A cores: 1: 3600 2: 3600 3: 3600 4: 3600 5: 3600 6: 3600
bogomips: 43199
Flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow mitigation: safe RET, no microcode
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: disabled; RSB
filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Red Hat Virtio 1.0 GPU driver: virtio-pci v: 1 alternate: virtio_pci ports:
active: Virtual-1 empty: none bus-ID: 00:01.0 chip-ID: 1af4:1050 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: budgie-wm driver:
X: loaded: modesetting unloaded: fbdev,vesa dri: swrast gpu: virtio-pci display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.00x11.26") s-diag: 583mm (22.95")
Monitor-1: Virtual-1 model: QEMU Monitor built: 2014 res: 1920x1080 hz: 60 dpi: 150 gamma: 1.2
size: 325x203mm (12.8x7.99") diag: 383mm (15.1") ratio: 16:10 modes: max: 1280x800 min: 640x480
API: OpenGL v: 4.5 Mesa 22.3.6 renderer: llvmpipe (LLVM 15.0.6 256 bits) direct-render: Yes
Audio:
Device-1: Intel 82801I HD Audio vendor: Red Hat QEMU Virtual Machine driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
API: ALSA v: k6.1.0-31-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Red Hat Virtio 1.0 network driver: virtio-pci v: 1 modules: virtio_pci pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 01:00.0 chip-ID: 1af4:1041 class-ID: 0200
IF-ID-1: eth0 state: up speed: -1 duplex: unknown mac: <filter>
Drives:
Local Storage: total: 20 GiB used: 7.75 GiB (38.8%)
ID-1: /dev/vda maj-min: 254:0 model: N/A size: 20 GiB block-size: physical: 512 B
logical: 512 B speed: <unknown> type: N/A serial: N/A scheme: MBR
SMART Message: Unknown smartctl error. Unable to generate data.
Partition:
ID-1: / raw-size: 20 GiB size: 19.52 GiB (97.59%) used: 7.75 GiB (39.7%) fs: ext4 dev: /dev/vda1
maj-min: 254:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: dpkg pkgs: 1944 libs: 933 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm pkgs: 0
pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://debian.redimadrid.es/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://debian.redimadrid.es/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.cica.es/mirrors/Linux/MX-Packages/mx/repo/ bookworm main non-free
Info:
Processes: 245 Uptime: 0m wakeups: 12 Memory: 5.79 GiB used: 1004.5 MiB (17.0%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
, everything else seems to work, suspend, hibernate, reboot and shutdown.
