Pulseeffects, Pipewire-Alsa Bridge task was removed  [Solved]

Forum rules
Post Reply
Message
Author
Heliosstyx
Posts: 6
Joined: Wed Feb 12, 2025 2:06 pm

Pulseeffects, Pipewire-Alsa Bridge task was removed

#1 Post by Heliosstyx »

Here is my Systeminfo:

Code: Select all

Code: Select all

System:
  Kernel: 6.1.0-31-amd64 [6.1.128-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/vmlinuz-6.1.0-31-amd64 root=UUID=<filter> ro quiet splash
    resume=UUID=<filter> resume_offset=71337984
  Desktop: Xfce v: 4.20.0 tk: Gtk v: 3.24.38 info: xfce4-panel wm: xfwm v: 4.20.0 vt: 7
    dm: LightDM v: 1.32.0 Distro: MX-23.5_x64 Libretto September 15  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Laptop System: Hewlett-Packard product: HP Pavilion dv7 Notebook PC v: Rev 1
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: Hewlett-Packard model: 3624 v: 18.51 serial: <superuser required> BIOS: Hewlett-Packard
    v: F.46 date: 08/25/2011
Battery:
  ID-1: BAT0 charge: 94.9 Wh (100.0%) condition: 94.9/95.0 Wh (99.9%) volts: 16.3 min: 14.4
    model: Hewlett-Packard Primary type: Li-ion serial: N/A status: full
CPU:
  Info: model: Intel Core2 Quad Q9000 bits: 64 type: MCP arch: Penryn level: v1 built: 2008
    process: Intel 45nm family: 6 model-id: 0x17 (23) stepping: 0xA (10) microcode: 0xA0B
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB
    L2: 6 MiB desc: 2x3 MiB
  Speed (MHz): avg: 1596 min/max: 1600/2001 boost: enabled scaling: driver: acpi-cpufreq
    governor: ondemand cores: 1: 1596 2: 1596 3: 1596 4: 1596 bogomips: 15959
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: mmio_stale_data status: Unknown: No mitigations
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; STIBP: disabled; RSB filling; PBRSB-eIBRS: Not
    affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD RV730/M96 [Mobility Radeon HD 4650/5165] vendor: Hewlett-Packard driver: radeon
    v: kernel alternate: amdgpu arch: TeraScale code: R6xx/RV6xx/RV7xx process: TSMC 55-65nm
    built: 2005-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 ports: active: LVDS-1
    empty: HDMI-A-1,VGA-1 bus-ID: 01:00.0 chip-ID: 1002:9480 class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.20.0 driver: X: loaded: radeon
    unloaded: fbdev,modesetting,vesa dri: r600 gpu: radeon display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 424x239mm (16.69x9.41") s-diag: 487mm (19.16")
  Monitor-1: LVDS-1 mapped: LVDS model: LG Display 0x01dd built: 2008 res: 1600x900 hz: 60
    dpi: 106 gamma: 1.2 size: 382x215mm (15.04x8.46") diag: 438mm (17.3") ratio: 16:9 modes:
    max: 1600x900 min: 640x480
  API: OpenGL v: 3.3 Mesa 22.3.6 renderer: AMD RV730 (DRM 2.50.0 / 6.1.0-31-amd64 LLVM 15.0.6)
    compat-v: 3.0 direct-render: Yes
Audio:
  Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:293e class-ID: 0403
  Device-2: AMD RV710/730 HDMI Audio [Radeon HD 4000 series] vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 16 bus-ID: 01:00.1
    chip-ID: 1002:aa38 class-ID: 0403
  API: ALSA v: k6.1.0-31-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: off with: 1: pipewire-pulse status: off 2: wireplumber
    status: off 3: pw-jack type: plugin tools: pw-cat,pw-cli,wpctl
  Server-2: PulseAudio v: 16.1 status: active tools: pacat,pactl,pavucontrol
Network:
  Device-1: Intel PRO/Wireless 5100 AGN [Shiloh] Network driver: iwlwifi v: kernel modules: wl
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:4237 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Hewlett-Packard
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 5000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eth0 state: down mac: <filter>
Drives:
  Local Storage: total: 1.82 TiB used: 16.88 GiB (0.9%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 QVO 1TB size: 931.51 GiB block-size:
    physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 2B6Q scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 870 EVO 1TB size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s type: SSD serial: <filter> rev: 3B6Q
    scheme: MBR
Partition:
  ID-1: / raw-size: 442.28 GiB size: 434.27 GiB (98.19%) used: 16.7 GiB (3.8%) fs: ext4
    dev: /dev/dm-0 maj-min: 253:0 mapped: luks-<filter>
  ID-2: /boot raw-size: 952.7 MiB size: 919.4 MiB (96.50%) used: 192.9 MiB (21.0%) fs: ext4
    dev: /dev/sdb5 maj-min: 8:21
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 5.79 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 53.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Repos:
  Packages: pm: dpkg pkgs: 2352 libs: 1241 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.easyname.ch/mxlinux-packages/mx/repo/ bookworm main non-free
Info:
  Processes: 237 Uptime: 13m wakeups: 2 Memory: 3.79 GiB used: 1.89 GiB (49.8%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)
Today I installed Pulseeffects from the official repos. I works well, but the Pipewire-Alsa task service was removed. What's going wrong?. How can I get back the "Pipewire-Alsa"-Task?

Thank you
Top
User avatar
Stevo
Developer
Posts: 14607
Joined: Fri Dec 15, 2006 7:07 pm

Re: Pulseeffects, Pipewire-Alsa Bridge task was removed

#2 Post by Stevo »

Use MX Updater's history feature to find out what package name was removed, then

Code: Select all

aptitude why-not (the package name)
for perhaps the answer.
MXPI = MX Package Installer
QSI = Quick System Info from menu
The MX Test repository is mostly backports; not the same as Debian testing
Top
Heliosstyx
Posts: 6
Joined: Wed Feb 12, 2025 2:06 pm

Re: Pulseeffects, Pipewire-Alsa Bridge task was removed

#3 Post by Heliosstyx »

@Stevo Thank you for answer. How can I repair it for getting back the pipewire-alsa package and the pipewire-setup-mx package
Top
Heliosstyx
Posts: 6
Joined: Wed Feb 12, 2025 2:06 pm

Re: Pulseeffects, Pipewire-Alsa Bridge task was removed

#4 Post by Heliosstyx »

Should I use instead the package "easyeffects" for Pipewire-service?
Top
Heliosstyx
Posts: 6
Joined: Wed Feb 12, 2025 2:06 pm

Re: Pulseeffects, Pipewire-Alsa Bridge task was removed  [Solved]

#5 Post by Heliosstyx »

The solution for Pipewire-Framework is easyeffects and it works excellent without any issues.
Top
Post Reply

Return to “Software / Configuration”