i made:
enable KDE wallet subsystems and create a KDE wallet password safe/store. When this is done next time you connect to a network-resource like smb://my-network.folder/ it offers you to store the entered credentials ( wich are stored into the kde wallet).
but it's not work
when i click few times to my share, i get prompt to enter password again.
i cannot attach video demonstration because of limit in150kb, and post link to uploaded video, because i get Forbidden. HTTP links blacklisted. Anti-Spam by CleanTalk.
system info:
Code: Select all
System:
Kernel: 6.1.0-28-amd64 [6.1.119-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/vmlinuz-6.1.0-28-amd64 root=UUID=<filter> ro quiet
init=/lib/systemd/systemd
Desktop: KDE Plasma v: 5.27.5 wm: kwin_x11 vt: 7 dm: SDDM Distro: MX-23.5_KDE_x64 Libretto
September 15 2024 base: Debian GNU/Linux 12 (bookworm)
Machine:
Type: Desktop Mobo: Micro-Star model: MS-B1831 v: 1.0 serial: <superuser required>
UEFI: American Megatrends v: 8.30 date: 01/06/2021
CPU:
Info: model: Intel Core i5-10210U bits: 64 type: MT MCP arch: Comet/Whiskey Lake note: check
gen: core 10 level: v3 note: check built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142)
stepping: 0xC (12) microcode: 0xFC
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 800 min/max: 400/4200 scaling: driver: intel_pstate governor: powersave
cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800 8: 800 bogomips: 33599
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling mitigation: Microcode
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: Enhanced IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional; RSB filling;
PBRSB-eIBRS: SW sequence; BHI: SW loop, KVM: SW loop
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel CometLake-U GT2 [UHD Graphics] vendor: Micro-Star MSI driver: i915 v: kernel
arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: DP-1,HDMI-A-2 empty: HDMI-A-1
bus-ID: 00:02.0 chip-ID: 8086:9b41 class-ID: 0300
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-3:2
chip-ID: 046d:0825 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: kwin_x11 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.00x11.22")
s-diag: 1055mm (41.54")
Monitor-1: DP-1 pos: primary,right model: Dell P2418HT serial: <filter> built: 2018
res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
Monitor-2: HDMI-A-2 mapped: HDMI-2 pos: left model: Acer SA220Q serial: <filter> built: 2018
res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2 size: 476x268mm (18.74x10.55") diag: 546mm (21.5")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 24.2.2-1~mx23ahs renderer: Mesa Intel UHD Graphics (CML GT2)
direct-render: Yes
Audio:
Device-1: Intel Comet Lake PCH-LP cAVS vendor: Micro-Star MSI driver: snd_hda_intel bus-ID: 1-3:2
v: kernel chip-ID: 046d:0825 alternate: snd_sof_pci_intel_cnl bus-ID: 00:1f.3 class-ID: 0102
chip-ID: 8086:02c8 serial: <filter> class-ID: 0403
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo
API: ALSA v: k6.1.0-28-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel modules: wl bus-ID: 00:14.3
chip-ID: 8086:02f0 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Device-2: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e v: kernel port: N/A
bus-ID: 00:1f.6 chip-ID: 8086:15be class-ID: 0200
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: wg0-mullvad state: unknown speed: N/A duplex: N/A mac: N/A
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) type: USB driver: btusb v: 0.8
bus-ID: 1-10:7 chip-ID: 8087:0aaa class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
sub-v: 2184 hci-v: 5.1 rev: 2184
Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
Local Storage: total: 536.57 GiB used: 32.53 GiB (6.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Transcend model: TS64GSSD370S size: 59.63 GiB block-size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 5CA scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Realtek model: RTL9210B-CG size: 476.94 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.00 scheme: GPT
Partition:
ID-1: / raw-size: 58.36 GiB size: 57.14 GiB (97.91%) used: 32.3 GiB (56.5%) fs: ext4
dev: /dev/dm-0 maj-min: 253:0 mapped: luks-<filter>
ID-2: /boot raw-size: 1024 MiB size: 973.4 MiB (95.06%) used: 187.8 MiB (19.3%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-3: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 3 GiB used: 254.9 MiB (8.3%) priority: -2 file: /swap/swap
ID-2: swap-2 type: zram size: 256 MiB used: 255.4 MiB (99.8%) priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 42.0 C pch: 40.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: 2650 pm: dpkg pkgs: 2643 libs: 1451 tools: apt,apt-get,aptitude,nala pm: rpm pkgs: 0
pm: flatpak pkgs: 7
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/element-io.list
1: deb [signed-by=/usr/share/keyrings/element-io-archive-keyring.gpg] https://packages.element.io/debian/ default main
Active apt repos in: /etc/apt/sources.list.d/mullvad.list
1: deb [signed-by=/usr/share/keyrings/mullvad-keyring.asc arch=amd64] https://repository.mullvad.net/deb/stable bookworm main
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb https://mxlinux.mirror.iphh.net/packages/mx/repo/ bookworm main non-free
2: deb https://mxlinux.mirror.iphh.net/packages/mx/repo/ bookworm ahs
Active apt repos in: /etc/apt/sources.list.d/extrepo_librewolf.sources
1: deb [arch=amd64 arm64] https://repo.librewolf.net librewolf main
Info:
Processes: 297 Uptime: 1d 2h 11m wakeups: 20 Memory: 7.61 GiB used: 6.27 GiB (82.4%)
Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers:
gcc: 12.2.0 alt: 12 Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
