Had to split, bc post exceeded the max length of 60.000.
Code: Select all
[ 0.242650] pci 0000:00:14.0: Adding to iommu group 11
[ 0.242660] pci 0000:00:14.3: Adding to iommu group 11
[ 0.242715] pci 0000:00:18.0: Adding to iommu group 12
[ 0.242726] pci 0000:00:18.1: Adding to iommu group 12
[ 0.242736] pci 0000:00:18.2: Adding to iommu group 12
[ 0.242747] pci 0000:00:18.3: Adding to iommu group 12
[ 0.242757] pci 0000:00:18.4: Adding to iommu group 12
[ 0.242768] pci 0000:00:18.5: Adding to iommu group 12
[ 0.242778] pci 0000:00:18.6: Adding to iommu group 12
[ 0.242788] pci 0000:00:18.7: Adding to iommu group 12
[ 0.242800] pci 0000:01:00.0: Adding to iommu group 13
[ 0.242821] pci 0000:02:00.0: Adding to iommu group 14
[ 0.242847] pci 0000:03:00.0: Adding to iommu group 15
[ 0.242869] pci 0000:03:00.1: Adding to iommu group 16
[ 0.242882] pci 0000:04:00.0: Adding to iommu group 17
[ 0.242894] pci 0000:05:00.0: Adding to iommu group 18
[ 0.242914] pci 0000:06:00.0: Adding to iommu group 19
[ 0.242929] pci 0000:06:08.0: Adding to iommu group 20
[ 0.242944] pci 0000:06:09.0: Adding to iommu group 21
[ 0.242960] pci 0000:06:0a.0: Adding to iommu group 22
[ 0.242975] pci 0000:06:0b.0: Adding to iommu group 23
[ 0.242991] pci 0000:06:0c.0: Adding to iommu group 24
[ 0.243006] pci 0000:06:0d.0: Adding to iommu group 25
[ 0.243012] pci 0000:0a:00.0: Adding to iommu group 22
[ 0.243016] pci 0000:0c:00.0: Adding to iommu group 24
[ 0.243020] pci 0000:0d:00.0: Adding to iommu group 25
[ 0.243032] pci 0000:0e:00.0: Adding to iommu group 26
[ 0.243050] pci 0000:0f:00.0: Adding to iommu group 27
[ 0.243062] pci 0000:0f:00.1: Adding to iommu group 28
[ 0.243075] pci 0000:0f:00.2: Adding to iommu group 29
[ 0.243087] pci 0000:0f:00.3: Adding to iommu group 30
[ 0.243099] pci 0000:0f:00.4: Adding to iommu group 31
[ 0.243112] pci 0000:0f:00.6: Adding to iommu group 32
[ 0.243123] pci 0000:10:00.0: Adding to iommu group 33
[ 0.244701] AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
[ 0.244705] AMD-Vi: Interrupt remapping enabled
[ 0.246499] AMD-Vi: Virtual APIC enabled
[ 0.246506] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.246509] software IO TLB: mapped [mem 0x000000006589e000-0x000000006989e000] (64MB)
[ 0.246556] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 0.246557] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.246558] LVT offset 0 assigned for vector 0x400
[ 0.246594] perf: AMD IBS detected (0x00000bff)
[ 0.246598] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.246989] Initialise system trusted keyrings
[ 0.246997] Key type blacklist registered
[ 0.247020] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 0.252460] Key type asymmetric registered
[ 0.252461] Asymmetric key parser 'x509' registered
[ 0.252470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.252498] io scheduler mq-deadline registered
[ 0.252499] io scheduler kyber registered
[ 0.252506] io scheduler bfq registered
[ 0.253369] pcieport 0000:00:01.1: PME: Signaling with IRQ 27
[ 0.253474] pcieport 0000:00:01.2: PME: Signaling with IRQ 28
[ 0.253566] pcieport 0000:00:02.1: PME: Signaling with IRQ 29
[ 0.253666] pcieport 0000:00:02.2: PME: Signaling with IRQ 30
[ 0.253766] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[ 0.253853] pcieport 0000:00:08.3: PME: Signaling with IRQ 32
[ 0.254715] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.254858] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.254873] ACPI: button: Power Button [PWRB]
[ 0.254898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.255350] ACPI: button: Power Button [PWRF]
[ 0.255705] Estimated ratio of average max frequency by base frequency (times 1024): 1106
[ 0.255712] Monitor-Mwait will be used to enter C-1 state
[ 0.255714] ACPI: \_SB_.PLTF.C000: Found 3 idle states
[ 0.255775] ACPI: \_SB_.PLTF.C002: Found 3 idle states
[ 0.255827] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[ 0.255903] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[ 0.255996] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[ 0.256087] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[ 0.256173] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[ 0.256233] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[ 0.256293] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[ 0.256361] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[ 0.256448] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[ 0.256531] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[ 0.256716] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.277684] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.278587] Key type psk registered
[ 0.278709] ahci 0000:0d:00.0: version 3.0
[ 0.278742] nvme nvme1: pci function 0000:0e:00.0
[ 0.278744] nvme nvme0: pci function 0000:04:00.0
[ 0.286208] ahci 0000:0d:00.0: SSS flag set, parallel bus scan disabled
[ 0.292991] ahci 0000:0d:00.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.292993] ahci 0000:0d:00.0: 4/6 ports implemented (port mask 0xf)
[ 0.292995] ahci 0000:0d:00.0: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.303058] scsi host0: ahci
[ 0.304367] scsi host1: ahci
[ 0.305470] scsi host2: ahci
[ 0.306573] scsi host3: ahci
[ 0.307834] scsi host4: ahci
[ 0.308337] scsi host5: ahci
[ 0.308364] ata1: SATA max UDMA/133 abar m1024@0xf6780000 port 0xf6780100 irq 44 lpm-pol 0
[ 0.308366] ata2: SATA max UDMA/133 abar m1024@0xf6780000 port 0xf6780180 irq 44 lpm-pol 0
[ 0.308367] ata3: SATA max UDMA/133 abar m1024@0xf6780000 port 0xf6780200 irq 44 lpm-pol 0
[ 0.308368] ata4: SATA max UDMA/133 abar m1024@0xf6780000 port 0xf6780280 irq 44 lpm-pol 0
[ 0.308370] ata5: DUMMY
[ 0.308370] ata6: DUMMY
[ 0.308527] i8042: PNP: No PS/2 controller found.
[ 0.308576] rtc_cmos 00:02: RTC can wake from S4
[ 0.308742] rtc_cmos 00:02: registered as rtc0
[ 0.308763] rtc_cmos 00:02: setting system clock to 2024-12-30T13:17:57 UTC (1735564677)
[ 0.308782] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 0.309235] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.309262] efifb: probing for efifb
[ 0.309269] efifb: framebuffer at 0xfce0000000, using 3072k, total 3072k
[ 0.309270] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.309271] efifb: scrolling: redraw
[ 0.309272] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.309317] Console: switching to colour frame buffer device 128x48
[ 0.309650] fb0: EFI VGA frame buffer device
[ 0.309669] hid: raw HID events driver (C) Jiri Kosina
[ 0.309758] NET: Registered PF_INET6 protocol family
[ 0.319763] nvme nvme1: D3 entry latency set to 10 seconds
[ 0.323088] nvme nvme1: 12/0/0 default/read/poll queues
[ 0.323764] nvme nvme0: D3 entry latency set to 10 seconds
[ 0.324702] nvme1n1: p1 p2
[ 0.327104] nvme nvme0: 12/0/0 default/read/poll queues
[ 0.332516] nvme0n1: p1 p2 p3 p4 p5
[ 0.551684] Freeing initrd memory: 132404K
[ 0.555357] Segment Routing with IPv6
[ 0.555358] RPL Segment Routing with IPv6
[ 0.555367] In-situ OAM (IOAM) with IPv6
[ 0.555404] Key type dns_resolver registered
[ 0.555945] microcode: Current revision: 0x0a601209
[ 0.556076] resctrl: L3 allocation detected
[ 0.556077] resctrl: MB allocation detected
[ 0.556078] resctrl: SMBA allocation detected
[ 0.556079] resctrl: L3 monitoring detected
[ 0.556095] IPI shorthand broadcast: enabled
[ 0.557184] sched_clock: Marking stable (555189649, 1230600)->(579838597, -23418348)
[ 0.557255] registered taskstats version 1
[ 0.557336] Loading compiled-in X.509 certificates
[ 0.558375] Demotion targets for Node 0: null
[ 0.558404] Key type .fscrypt registered
[ 0.558404] Key type fscrypt-provisioning registered
[ 0.560931] RAS: Correctable Errors collector initialized.
[ 0.568723] clk: Disabling unused clocks
[ 0.568724] PM: genpd: Disabling unused power domains
[ 0.616399] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.927325] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.235015] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.273418] tsc: Refined TSC clocksource calibration: 4700.002 MHz
[ 1.273426] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x43bf6e45347, max_idle_ns: 440795224625 ns
[ 1.273446] clocksource: Switched to clocksource tsc
[ 1.547187] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.547725] Freeing unused decrypted memory: 2028K
[ 1.547901] Freeing unused kernel image (initmem) memory: 3564K
[ 1.547905] Write protecting the kernel read-only data: 30720k
[ 1.548089] Freeing unused kernel image (rodata/data gap) memory: 1172K
[ 1.548093] Run /init as init process
[ 1.548094] with arguments:
[ 1.548094] /init
[ 1.548094] splash
[ 1.548095] with environment:
[ 1.548095] HOME=/
[ 1.548096] TERM=linux
[ 1.548096] BOOT_IMAGE=/vmlinuz-6.11.10-1-liquorix-amd64
[ 1.613342] ccp 0000:0f:00.2: enabling device (0000 -> 0002)
[ 1.614554] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.614691] ccp 0000:0f:00.2: tee enabled
[ 1.614707] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input2
[ 1.614858] ccp 0000:0f:00.2: psp enabled
[ 1.616686] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[ 1.616691] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 1
[ 1.619552] cryptd: max_cpu_qlen set to 1000
[ 1.624635] ACPI: bus type drm_connector registered
[ 1.624883] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.624886] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 1.625423] AES CTR mode by8 optimization enabled
[ 1.625840] i2c i2c-1: Successfully instantiated SPD at 0x51
[ 1.626822] i2c i2c-1: Successfully instantiated SPD at 0x53
[ 1.626870] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.631725] Linux agpgart interface v0.103
[ 1.634055] r8169 0000:0a:00.0 eth0: RTL8125B, 10:7c:61:76:c6:f1, XID 641, IRQ 74
[ 1.634058] r8169 0000:0a:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.672750] xhci_hcd 0000:0c:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000200000010
[ 1.673035] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[ 1.673038] xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 2
[ 1.673040] xhci_hcd 0000:0c:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.673727] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 1.673729] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.673731] usb usb1: Product: xHCI Host Controller
[ 1.673732] usb usb1: Manufacturer: Linux 6.11.10-1-liquorix-amd64 xhci-hcd
[ 1.673733] usb usb1: SerialNumber: 0000:0c:00.0
[ 1.673837] hub 1-0:1.0: USB hub found
[ 1.673852] hub 1-0:1.0: 12 ports detected
[ 1.675630] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.675642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 1.675643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.675644] usb usb2: Product: xHCI Host Controller
[ 1.675645] usb usb2: Manufacturer: Linux 6.11.10-1-liquorix-amd64 xhci-hcd
[ 1.675646] usb usb2: SerialNumber: 0000:0c:00.0
[ 1.675693] hub 2-0:1.0: USB hub found
[ 1.675704] hub 2-0:1.0: 6 ports detected
[ 1.676668] xhci_hcd 0000:0f:00.3: xHCI Host Controller
[ 1.676671] xhci_hcd 0000:0f:00.3: new USB bus registered, assigned bus number 3
[ 1.677023] xhci_hcd 0000:0f:00.3: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000010
[ 1.677226] xhci_hcd 0000:0f:00.3: xHCI Host Controller
[ 1.677227] xhci_hcd 0000:0f:00.3: new USB bus registered, assigned bus number 4
[ 1.677229] xhci_hcd 0000:0f:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.677247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 1.677248] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.677249] usb usb3: Product: xHCI Host Controller
[ 1.677250] usb usb3: Manufacturer: Linux 6.11.10-1-liquorix-amd64 xhci-hcd
[ 1.677251] usb usb3: SerialNumber: 0000:0f:00.3
[ 1.677303] hub 3-0:1.0: USB hub found
[ 1.677311] hub 3-0:1.0: 2 ports detected
[ 1.677613] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.677624] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 1.677625] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.677626] usb usb4: Product: xHCI Host Controller
[ 1.677627] usb usb4: Manufacturer: Linux 6.11.10-1-liquorix-amd64 xhci-hcd
[ 1.677627] usb usb4: SerialNumber: 0000:0f:00.3
[ 1.677671] hub 4-0:1.0: USB hub found
[ 1.677679] hub 4-0:1.0: 2 ports detected
[ 1.677984] xhci_hcd 0000:0f:00.4: xHCI Host Controller
[ 1.677987] xhci_hcd 0000:0f:00.4: new USB bus registered, assigned bus number 5
[ 1.678333] xhci_hcd 0000:0f:00.4: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000010
[ 1.678529] xhci_hcd 0000:0f:00.4: xHCI Host Controller
[ 1.678531] xhci_hcd 0000:0f:00.4: new USB bus registered, assigned bus number 6
[ 1.678532] xhci_hcd 0000:0f:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.678551] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 1.678553] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.678553] usb usb5: Product: xHCI Host Controller
[ 1.678554] usb usb5: Manufacturer: Linux 6.11.10-1-liquorix-amd64 xhci-hcd
[ 1.678555] usb usb5: SerialNumber: 0000:0f:00.4
[ 1.678603] hub 5-0:1.0: USB hub found
[ 1.678611] hub 5-0:1.0: 2 ports detected
[ 1.678900] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.678911] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 1.678912] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.678913] usb usb6: Product: xHCI Host Controller
[ 1.678914] usb usb6: Manufacturer: Linux 6.11.10-1-liquorix-amd64 xhci-hcd
[ 1.678915] usb usb6: SerialNumber: 0000:0f:00.4
[ 1.678958] hub 6-0:1.0: USB hub found
[ 1.678966] hub 6-0:1.0: 2 ports detected
[ 1.679311] xhci_hcd 0000:10:00.0: xHCI Host Controller
[ 1.679314] xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 7
[ 1.680580] xhci_hcd 0000:10:00.0: USB3 root hub has no ports
[ 1.680582] xhci_hcd 0000:10:00.0: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000010
[ 1.680782] xhci_hcd 0000:10:00.0: xHCI Host Controller
[ 1.680783] xhci_hcd 0000:10:00.0: new USB bus registered, assigned bus number 8
[ 1.680784] xhci_hcd 0000:10:00.0: Host supports USB 3.0 SuperSpeed
[ 1.680804] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.11
[ 1.680806] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.680807] usb usb7: Product: xHCI Host Controller
[ 1.680808] usb usb7: Manufacturer: Linux 6.11.10-1-liquorix-amd64 xhci-hcd
[ 1.680808] usb usb7: SerialNumber: 0000:10:00.0
[ 1.680860] hub 7-0:1.0: USB hub found
[ 1.680868] hub 7-0:1.0: 1 port detected
[ 1.681043] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.681054] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.11
[ 1.681055] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.681056] usb usb8: Product: xHCI Host Controller
[ 1.681057] usb usb8: Manufacturer: Linux 6.11.10-1-liquorix-amd64 xhci-hcd
[ 1.681057] usb usb8: SerialNumber: 0000:10:00.0
[ 1.681101] hub 8-0:1.0: USB hub found
[ 1.681104] hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 1.915252] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 1.977242] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[ 2.046674] usb 5-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 8.04
[ 2.046677] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.046678] usb 5-1: Product: USB2.0 Hub
[ 2.046680] usb 5-1: Manufacturer: VIA Labs, Inc.
[ 2.062883] hub 5-1:1.0: USB hub found
[ 2.063299] hub 5-1:1.0: 5 ports detected
[ 2.335827] usb 1-7: config 1 has an invalid interface number: 2 but max is 1
[ 2.335830] usb 1-7: config 1 has no interface number 1
[ 2.347809] usb 1-7: New USB device found, idVendor=0b05, idProduct=19af, bcdDevice= 1.00
[ 2.347812] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.347813] usb 1-7: Product: AURA LED Controller
[ 2.347814] usb 1-7: Manufacturer: AsusTek Computer Inc.
[ 2.347815] usb 1-7: SerialNumber: 9876543210
[ 2.397652] [drm] amdgpu kernel modesetting enabled.
[ 2.397661] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
[ 2.397729] amdgpu: ATPX version 1, functions 0x00000000
[ 2.399683] hid-generic 0003:0B05:19AF.0001: hiddev96,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:0c:00.0-7/input2
[ 2.399701] usbcore: registered new interface driver usbhid
[ 2.399702] usbhid: USB HID core driver
[ 2.402400] amdgpu: Virtual CRAT table created for CPU
[ 2.402408] amdgpu: Topology: Add CPU node
[ 2.402478] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[ 2.402499] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x747E 0x1DA2:0x475C 0xFF).
[ 2.402505] [drm] register mmio base: 0xF6A00000
[ 2.402506] [drm] register mmio size: 1048576
[ 2.407384] [drm] add ip block number 0 <soc21_common>
[ 2.407385] [drm] add ip block number 1 <gmc_v11_0>
[ 2.407386] [drm] add ip block number 2 <ih_v6_0>
[ 2.407387] [drm] add ip block number 3 <psp>
[ 2.407387] [drm] add ip block number 4 <smu>
[ 2.407388] [drm] add ip block number 5 <dm>
[ 2.407389] [drm] add ip block number 6 <gfx_v11_0>
[ 2.407389] [drm] add ip block number 7 <sdma_v6_0>
[ 2.407390] [drm] add ip block number 8 <vcn_v4_0>
[ 2.407390] [drm] add ip block number 9 <jpeg_v4_0>
[ 2.407391] [drm] add ip block number 10 <mes_v11_0>
[ 2.407401] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT
[ 2.407402] amdgpu: ATOM BIOS: 113-D7120600-P31
[ 2.407577] amdgpu 0000:03:00.0: amdgpu: CP RS64 enable
[ 2.407857] Console: switching to colour dummy device 80x25
[ 2.407881] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[ 2.407882] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 2.407897] amdgpu 0000:03:00.0: amdgpu: MEM ECC is not presented.
[ 2.407898] amdgpu 0000:03:00.0: amdgpu: SRAM ECC is not presented.
[ 2.407902] amdgpu 0000:03:00.0: amdgpu: DF poison setting is inconsistent(1:0:0:0)!
[ 2.407903] amdgpu 0000:03:00.0: amdgpu: Poison setting is inconsistent in DF/UMC(0:1)!
[ 2.407935] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 2.407944] amdgpu 0000:03:00.0: BAR 2 [mem 0xfcf0000000-0xfcf01fffff 64bit pref]: releasing
[ 2.407946] amdgpu 0000:03:00.0: BAR 0 [mem 0xfce0000000-0xfcefffffff 64bit pref]: releasing
[ 2.407959] pcieport 0000:02:00.0: bridge window [mem 0xfce0000000-0xfcf01fffff 64bit pref]: releasing
[ 2.407960] pcieport 0000:01:00.0: bridge window [mem 0xfce0000000-0xfcf01fffff 64bit pref]: releasing
[ 2.407961] pcieport 0000:00:01.1: bridge window [mem 0xfce0000000-0xfcf01fffff 64bit pref]: releasing
[ 2.407966] pcieport 0000:00:01.1: bridge window [mem 0xa00000000-0xfffffffff 64bit pref]: assigned
[ 2.407967] pcieport 0000:01:00.0: bridge window [mem 0xa00000000-0xfffffffff 64bit pref]: assigned
[ 2.407969] pcieport 0000:02:00.0: bridge window [mem 0xa00000000-0xfffffffff 64bit pref]: assigned
[ 2.407970] amdgpu 0000:03:00.0: BAR 0 [mem 0xc00000000-0xfffffffff 64bit pref]: assigned
[ 2.407976] amdgpu 0000:03:00.0: BAR 2 [mem 0xa00000000-0xa001fffff 64bit pref]: assigned
[ 2.407982] pcieport 0000:00:01.1: PCI bridge to [bus 01-03]
[ 2.407983] pcieport 0000:00:01.1: bridge window [io 0xf000-0xffff]
[ 2.407986] pcieport 0000:00:01.1: bridge window [mem 0xf6a00000-0xf6cfffff]
[ 2.407987] pcieport 0000:00:01.1: bridge window [mem 0xa00000000-0xfffffffff 64bit pref]
[ 2.407997] pcieport 0000:01:00.0: PCI bridge to [bus 02-03]
[ 2.407998] pcieport 0000:01:00.0: bridge window [io 0xf000-0xffff]
[ 2.408001] pcieport 0000:01:00.0: bridge window [mem 0xf6a00000-0xf6bfffff]
[ 2.408004] pcieport 0000:01:00.0: bridge window [mem 0xa00000000-0xfffffffff 64bit pref]
[ 2.408007] pcieport 0000:02:00.0: PCI bridge to [bus 03]
[ 2.408009] pcieport 0000:02:00.0: bridge window [io 0xf000-0xffff]
[ 2.408012] pcieport 0000:02:00.0: bridge window [mem 0xf6a00000-0xf6bfffff]
[ 2.408014] pcieport 0000:02:00.0: bridge window [mem 0xa00000000-0xfffffffff 64bit pref]
[ 2.408019] amdgpu 0000:03:00.0: amdgpu: VRAM: 12272M 0x0000008000000000 - 0x00000082FEFFFFFF (12272M used)
[ 2.408021] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[ 2.408026] [drm] Detected VRAM RAM=12272M, BAR=16384M
[ 2.408027] [drm] RAM width 192bits GDDR6
[ 2.408073] [drm] amdgpu: 12272M of VRAM memory ready
[ 2.408074] [drm] amdgpu: 15616M of GTT memory ready.
[ 2.408083] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.408129] [drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
[ 2.408505] [drm] Loading DMUB firmware via PSP: version=0x07002A00
[ 2.408633] [drm] Found VCN firmware Version ENC: 1.20 DEC: 8 VEP: 0 Revision: 1
[ 2.454271] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.486189] amdgpu 0000:03:00.0: amdgpu: reserve 0xa700000 from 0x82e0000000 for PSP TMR
[ 2.731670] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 2.731671] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 2.731696] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x0000003d, smu fw if version = 0x00000040, smu fw program = 0, smu fw version = 0x00504f00 (80.79.0)
[ 2.731698] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
[ 2.828383] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[ 2.828709] [drm] Display Core v3.2.291 initialized on DCN 3.2
[ 2.828711] [drm] DP-HDMI FRL PCON supported
[ 2.830768] [drm] DMUB hardware initialized: version=0x07002A00
[ 2.857061] usb 6-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 8.04
[ 2.857064] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.857065] usb 6-1: Product: USB3.0 Hub
[ 2.857066] usb 6-1: Manufacturer: VIA Labs, Inc.
[ 2.878901] hub 6-1:1.0: USB hub found
[ 2.879122] hub 6-1:1.0: 4 ports detected
[ 3.091456] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 3.091469] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[ 3.091484] amdgpu: Virtual CRAT table created for GPU
[ 3.091590] amdgpu: Topology: Add dGPU node [0x747e:0x1002]
[ 3.091592] kfd kfd: amdgpu: added device 1002:747e
[ 3.091602] amdgpu 0000:03:00.0: amdgpu: SE 3, SH per SE 2, CU per SH 10, active_cu_number 54
[ 3.091605] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 3.091606] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 3.091607] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 3.091608] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[ 3.091608] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[ 3.091609] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[ 3.091610] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[ 3.091611] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[ 3.091611] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[ 3.091612] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 3.091613] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[ 3.091614] amdgpu 0000:03:00.0: amdgpu: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[ 3.091615] amdgpu 0000:03:00.0: amdgpu: ring vcn_unified_1 uses VM inv eng 1 on hub 8
[ 3.091615] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 4 on hub 8
[ 3.091616] amdgpu 0000:03:00.0: amdgpu: ring mes_kiq_3.1.0 uses VM inv eng 14 on hub 0
[ 3.093672] amdgpu 0000:03:00.0: amdgpu: Using BACO for runtime pm
[ 3.093938] [drm] Initialized amdgpu 3.59.0 for 0000:03:00.0 on minor 0
[ 3.099456] fbcon: amdgpudrmfb (fb0) is primary device
[ 3.099573] [drm] pre_validate_dsc:1578 MST_DSC dsc precompute is not needed
[ 3.253880] Console: switching to colour frame buffer device 320x90
[ 3.272286] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 3.282779] amdgpu 0000:0f:00.0: enabling device (0006 -> 0007)
[ 3.282837] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x164E 0x1043:0x8877 0xC7).
[ 3.282858] [drm] register mmio base: 0xF6600000
[ 3.282858] [drm] register mmio size: 524288
[ 3.284507] [drm] add ip block number 0 <nv_common>
[ 3.284509] [drm] add ip block number 1 <gmc_v10_0>
[ 3.284509] [drm] add ip block number 2 <navi10_ih>
[ 3.284510] [drm] add ip block number 3 <psp>
[ 3.284511] [drm] add ip block number 4 <smu>
[ 3.284512] [drm] add ip block number 5 <dm>
[ 3.284513] [drm] add ip block number 6 <gfx_v10_0>
[ 3.284514] [drm] add ip block number 7 <sdma_v5_2>
[ 3.284515] [drm] add ip block number 8 <vcn_v3_0>
[ 3.284515] [drm] add ip block number 9 <jpeg_v3_0>
[ 3.284525] amdgpu 0000:0f:00.0: amdgpu: Fetched VBIOS from VFCT
[ 3.284528] amdgpu: ATOM BIOS: 102-RAPHAEL-008
[ 3.284827] amdgpu 0000:0f:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[ 3.284855] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 3.284860] amdgpu 0000:0f:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 3.284861] amdgpu 0000:0f:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 3.284866] [drm] Detected VRAM RAM=512M, BAR=512M
[ 3.284867] [drm] RAM width 128bits DDR5
[ 3.284912] [drm] amdgpu: 512M of VRAM memory ready
[ 3.284914] [drm] amdgpu: 15616M of GTT memory ready.
[ 3.284928] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 3.285028] [drm] PCIE GART of 1024M enabled (table at 0x000000F41FC00000).
[ 3.285250] [drm] Loading DMUB firmware via PSP: version=0x05001900
[ 3.285553] [drm] use_doorbell being set to: [true]
[ 3.285564] [drm] Found VCN firmware Version ENC: 1.31 DEC: 3 VEP: 0 Revision: 2
[ 3.308048] amdgpu 0000:0f:00.0: amdgpu: reserve 0xa00000 from 0xf41e000000 for PSP TMR
[ 3.372147] amdgpu 0000:0f:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 3.374242] usb 5-1.2: new full-speed USB device number 3 using xhci_hcd
[ 3.377740] amdgpu 0000:0f:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 3.377742] amdgpu 0000:0f:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 3.378967] amdgpu 0000:0f:00.0: amdgpu: SMU is initialized successfully!
[ 3.378969] [drm] Seamless boot condition check passed
[ 3.379215] [drm] Display Core v3.2.291 initialized on DCN 3.1.5
[ 3.379216] [drm] DP-HDMI FRL PCON supported
[ 3.379973] [drm] DMUB hardware initialized: version=0x05001900
[ 3.380999] [drm] kiq ring mec 2 pipe 1 q 0
[ 3.384152] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[ 3.384158] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[ 3.384274] amdgpu: Virtual CRAT table created for GPU
[ 3.384969] amdgpu: Topology: Add dGPU node [0x164e:0x1002]
[ 3.384970] kfd kfd: amdgpu: added device 1002:164e
[ 3.384977] amdgpu 0000:0f:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 2, active_cu_number 2
[ 3.384979] amdgpu 0000:0f:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[ 3.384980] amdgpu 0000:0f:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 3.384981] amdgpu 0000:0f:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 3.384982] amdgpu 0000:0f:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 3.384982] amdgpu 0000:0f:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 3.384983] amdgpu 0000:0f:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 3.384984] amdgpu 0000:0f:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 3.384985] amdgpu 0000:0f:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 3.384985] amdgpu 0000:0f:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 3.384986] amdgpu 0000:0f:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
[ 3.384987] amdgpu 0000:0f:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[ 3.384988] amdgpu 0000:0f:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
[ 3.384989] amdgpu 0000:0f:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
[ 3.384989] amdgpu 0000:0f:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
[ 3.384990] amdgpu 0000:0f:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8
[ 3.385217] amdgpu 0000:0f:00.0: amdgpu: Runtime PM not available
[ 3.385392] [drm] Initialized amdgpu 3.59.0 for 0000:0f:00.0 on minor 1
[ 3.387427] amdgpu 0000:0f:00.0: [drm] Cannot find any crtc or sizes
[ 3.398900] raid6: skipped pq benchmark and selected avx512x4
[ 3.398901] raid6: using avx512x2 recovery algorithm
[ 3.399020] xor: automatically using best checksumming function avx
[ 3.399125] async_tx: api initialized (async)
[ 3.479575] usb 5-1.2: New USB device found, idVendor=2516, idProduct=0015, bcdDevice= 1.04
[ 3.479578] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.479579] usb 5-1.2: Product: Quickfire Pro Ultimate 6 key
[ 3.479580] usb 5-1.2: Manufacturer: CM Storm
[ 3.508696] input: CM Storm Quickfire Pro Ultimate 6 key as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-1/5-1.2/5-1.2:1.0/0003:2516:0015.0002/input/input3
[ 3.580476] hid-generic 0003:2516:0015.0002: input,hidraw1: USB HID v1.10 Keyboard [CM Storm Quickfire Pro Ultimate 6 key] on usb-0000:0f:00.4-1.2/input0
[ 3.593657] input: CM Storm Quickfire Pro Ultimate 6 key System Control as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-1/5-1.2/5-1.2:1.1/0003:2516:0015.0003/input/input4
[ 3.645451] input: CM Storm Quickfire Pro Ultimate 6 key Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-1/5-1.2/5-1.2:1.1/0003:2516:0015.0003/input/input5
[ 3.645506] hid-generic 0003:2516:0015.0003: input,hidraw2: USB HID v1.10 Device [CM Storm Quickfire Pro Ultimate 6 key] on usb-0000:0f:00.4-1.2/input1
[ 3.711253] usb 5-1.3: new full-speed USB device number 4 using xhci_hcd
[ 3.819575] usb 5-1.3: New USB device found, idVendor=1532, idProduct=0084, bcdDevice= 2.00
[ 3.819578] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.819580] usb 5-1.3: Product: Razer DeathAdder V2
[ 3.819581] usb 5-1.3: Manufacturer: Razer
[ 3.860677] input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-1/5-1.3/5-1.3:1.0/0003:1532:0084.0004/input/input6
[ 3.860864] hid-generic 0003:1532:0084.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer DeathAdder V2] on usb-0000:0f:00.4-1.3/input0
[ 3.865718] input: Razer Razer DeathAdder V2 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-1/5-1.3/5-1.3:1.1/0003:1532:0084.0005/input/input7
[ 3.917554] input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-1/5-1.3/5-1.3:1.1/0003:1532:0084.0005/input/input8
[ 3.917598] hid-generic 0003:1532:0084.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer DeathAdder V2] on usb-0000:0f:00.4-1.3/input1
[ 3.921749] input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-1/5-1.3/5-1.3:1.2/0003:1532:0084.0006/input/input9
[ 3.928429] device-mapper: uevent: version 1.0.3
[ 3.928473] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 3.938189] Key type encrypted registered
[ 3.999356] hid-generic 0003:1532:0084.0006: input,hidraw5: USB HID v1.11 Keyboard [Razer Razer DeathAdder V2] on usb-0000:0f:00.4-1.3/input2
[ 4.002888] hid-generic 0003:1532:0084.0007: hiddev97,hidraw6: USB HID v1.11 Device [Razer Razer DeathAdder V2] on usb-0000:0f:00.4-1.3/input3
[ 4.068468] usb 5-1.5: new high-speed USB device number 5 using xhci_hcd
[ 4.147551] usb 5-1.5: New USB device found, idVendor=2109, idProduct=8884, bcdDevice= 0.01
[ 4.147555] usb 5-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.147556] usb 5-1.5: Product: USB Billboard Device
[ 4.147557] usb 5-1.5: Manufacturer: VIA Labs, Inc.
[ 4.147558] usb 5-1.5: SerialNumber: 0000000000000001
[ 17.417451] Btrfs loaded, assert=on, zoned=yes, fsverity=yes
[ 18.077699] EXT4-fs (dm-0): mounted filesystem 0d225edc-891c-4f85-8e94-cb0bdc6ae2b3 ro with ordered data mode. Quota mode: none.
[ 18.314495] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 18.315346] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 18.316206] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 18.342548] spd5118 1-0051: DDR5 temperature sensor: vendor 0x06:0x32 revision 1.6
[ 18.348137] spd5118 1-0053: DDR5 temperature sensor: vendor 0x06:0x32 revision 1.6
[ 18.374311] tpm_crb MSFT0101:00: Disabling hwrng
[ 18.375849] asus_wmi: ASUS WMI generic driver loaded
[ 18.376452] asus_wmi: Initialization: 0x0
[ 18.376539] asus_wmi: BIOS WMI version: 0.0
[ 18.376638] asus_wmi: SFUN value: 0x0
[ 18.376641] eeepc-wmi eeepc-wmi: Detected AsusMbSwInterface, not ASUSWMI, use DSTS
[ 18.379301] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[ 18.383146] kvm_amd: TSC scaling supported
[ 18.383148] kvm_amd: Nested Virtualization enabled
[ 18.383149] kvm_amd: Nested Paging enabled
[ 18.383149] kvm_amd: LBR virtualization supported
[ 18.383151] kvm_amd: Virtual GIF supported
[ 18.383151] kvm_amd: Virtual NMI enabled
[ 18.386805] MCE: In-kernel MCE decoding enabled.
[ 18.391987] intel_rapl_common: Found RAPL domain package
[ 18.391989] intel_rapl_common: Found RAPL domain core
[ 18.392569] amd_atl: AMD Address Translation Library initialized
[ 18.394572] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[ 18.394628] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[ 18.394630] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[ 18.394817] snd_hda_intel 0000:0f:00.1: enabling device (0000 -> 0002)
[ 18.394844] snd_hda_intel 0000:0f:00.1: Handle vga_switcheroo audio client
[ 18.394925] snd_hda_intel 0000:0f:00.6: enabling device (0000 -> 0002)
[ 18.400297] snd_hda_intel 0000:0f:00.1: bound 0000:0f:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 18.400850] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 18.401408] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0f:00.1/sound/card1/input11
[ 18.401458] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:0f:00.1/sound/card1/input12
[ 18.401517] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input13
[ 18.401551] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input14
[ 18.401593] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input15
[ 18.401623] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card0/input16
[ 18.446545] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC897: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 18.446547] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.446549] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 18.446550] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 18.446551] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
[ 18.446551] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 18.446552] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
[ 18.446553] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
[ 18.446554] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[ 18.476513] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0f:00.6/sound/card2/input17
[ 18.476541] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0f:00.6/sound/card2/input18
[ 18.476567] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0f:00.6/sound/card2/input19
[ 18.476590] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0f:00.6/sound/card2/input20
[ 18.476616] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0f:00.6/sound/card2/input21
[ 18.476643] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0f:00.6/sound/card2/input22
[ 18.476666] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0f:00.6/sound/card2/input23
[ 19.942588] mousedev: PS/2 mouse device common for all mice
[ 20.087890] EXT4-fs (dm-0): re-mounted 0d225edc-891c-4f85-8e94-cb0bdc6ae2b3 r/w. Quota mode: none.
[ 32.901628] lp: driver loaded but no devices found
[ 32.903897] ppdev: user-space parallel port driver
[ 32.908494] EXT4-fs (nvme0n1p2): mounted filesystem 714ba61c-2fc4-4c81-946f-95b8b81cc923 r/w with ordered data mode. Quota mode: none.
[ 32.909734] loop: module loaded
[ 32.913892] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 32.924083] EXT4-fs (dm-2): mounted filesystem 22ca55c0-9c10-4bfb-8475-fed1cb0df5a5 r/w with ordered data mode. Quota mode: none.
[ 32.930875] EXT4-fs (dm-3): mounted filesystem 1d014741-982b-43c9-8e73-b1bd1dbfac93 r/w with ordered data mode. Quota mode: none.
[ 32.937456] EXT4-fs (dm-4): mounted filesystem 3b69a4b9-c3ec-4e3b-a072-8c78adc9b17c r/w with ordered data mode. Quota mode: none.
[ 32.973023] Adding 41926652k swap on /dev/mapper/luks-649dfbc3-9d32-427d-a41f-5ebeee51c3fa. Priority:-2 extents:1 across:41926652k SSDsc
[ 33.051755] networking done
[ 33.117612] RPC: Registered named UNIX socket transport module.
[ 33.117613] RPC: Registered udp transport module.
[ 33.117614] RPC: Registered tcp transport module.
[ 33.117614] RPC: Registered tcp-with-tls transport module.
[ 33.117615] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 33.128529] netfs: FS-Cache loaded
[ 33.297107] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input24
[ 34.452331] Bluetooth: Core ver 2.22
[ 34.452343] NET: Registered PF_BLUETOOTH protocol family
[ 34.452344] Bluetooth: HCI device and connection manager initialized
[ 34.452347] Bluetooth: HCI socket layer initialized
[ 34.452349] Bluetooth: L2CAP socket layer initialized
[ 34.452351] Bluetooth: SCO socket layer initialized
[ 34.457093] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.457095] Bluetooth: BNEP filters: protocol multicast
[ 34.457097] Bluetooth: BNEP socket layer initialized
[ 34.486241] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-a00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-a00:00, irq=MAC)
[ 34.652668] r8169 0000:0a:00.0 eth0: Link is Down
[ 34.691296] NET: Registered PF_QIPCRTR protocol family
[ 34.868596] amdgpu 0000:03:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 34.868598] amdgpu 0000:0f:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 37.030393] r8169 0000:0a:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 37.034954] NET: Registered PF_PACKET protocol family
[ 40.688726] fuse: init (API version 7.40)
[ 2329.148719] mx-packageinsta[16516]: segfault at 8 ip 0000749256eaa8d6 sp 00007ffef74cd140 error 4 in libQt5Widgets.so.5.15.8[2aa8d6,749256d4e000+3c4000] likely on CPU 0 (core 0, socket 0)
[ 2329.148727] Code: 64 ea ff eb d0 e8 6a 54 ea ff 66 2e 0f 1f 84 00 00 00 00 00 53 48 89 fb 48 83 ec 20 64 48 8b 04 25 28 00 00 00 48 89 44 24 18 <48> 8b 46 08 48 8b b0 b8 01 00 00 48 8b 56 18 48 89 54 24 08 8b 02