Fail to Mount

Report Bugs, Issues and non- package Requests
Forum rules
Post Reply
Message
Author
mattdebauge
Posts: 42
Joined: Wed Jan 04, 2023 8:28 pm

Fail to Mount

#1 Post by mattdebauge »

When I plugged in USB drive and it was supposed to mount and load window automatically but it didn't. I clicked on Thunar and clicked the drive, it popped up "Fail to Mount xxx" "Not Authorized to perform operation". I got puzzled about it. It was working perfectly fine before and I think recent update had bug. I did on other system and installed MX. It work fine until I updated it, afterward, it's not working anymore. Same result. Are you aware of that?

Thanks
Matt

System info

Code: Select all

Snapshot created on: 20241223_1243
System:
  Kernel: 6.1.0-28-amd64 [6.1.119-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-28-amd64 root=UUID=<filter> ro quiet splash
    init=/lib/systemd/systemd
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.4_x64 Libretto November 15  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop Mobo: ASRock model: B550 Steel Legend serial: <superuser required> UEFI: American
    Megatrends LLC. v: P2.00 date: 04/21/2021
Battery:
  Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 7 5700X3D bits: 64 type: MT MCP arch: Zen 3+ gen: 4 level: v3 note: check
    built: 2022 process: TSMC n6 (7nm) family: 0x19 (25) model-id: 0x21 (33) stepping: 2
    microcode: N/A
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
    desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 96 MiB desc: 1x96 MiB
  Speed (MHz): avg: 2321 high: 3329 min/max: 2200/3410 boost: enabled scaling:
    driver: acpi-cpufreq governor: ondemand cores: 1: 2112 2: 2200 3: 2200 4: 2200 5: 2200 6: 3329
    7: 2528 8: 2200 9: 2200 10: 2564 11: 2049 12: 2200 13: 2594 14: 2200 15: 2162 16: 2200
    bogomips: 95818
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow mitigation: safe RET, no microcode
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: always-on; RSB
    filling; PBRSB-eIBRS: Not affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] vendor: Tul / PowerColor AXRX
    driver: amdgpu v: kernel arch: RDNA-1 code: Navi-1x process: TSMC n7 (7nm) built: 2019-20 pcie:
    gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 07:00.0
    chip-ID: 1002:731f class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: amdgpu
    unloaded: fbdev,modesetting,radeon,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 444x277mm (17.48x10.91") s-diag: 523mm (20.6")
  Monitor-1: DP-1 mapped: DisplayPort-0 model: Samsung SyncMaster serial: <filter> built: 2008
    res: 1680x1050 hz: 60 dpi: 267 gamma: 1.2 size: 160x90mm (6.3x3.54") diag: 184mm (7.2")
    ratio: 16:9 modes: max: 1680x1050 min: 720x400
  API: OpenGL v: 4.6 Mesa 22.3.6 renderer: AMD Radeon RX 5700 XT (navi10 LLVM 15.0.6 DRM 3.49
    6.1.0-28-amd64) direct-render: Yes
Audio:
  Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
    lanes: 16 bus-ID: 07:00.1 chip-ID: 1002:ab38 class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASRock driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 09:00.4 chip-ID: 1022:1487 class-ID: 0403
  API: ALSA v: k6.1.0-28-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel modules: wl pcie: gen: 2 speed: 5 GT/s
    lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlan0 state: up mac: <filter>
  Device-2: Realtek RTL8125 2.5GbE vendor: ASRock driver: r8169 v: kernel pcie: gen: 2
    speed: 5 GT/s lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8125 class-ID: 0200
  IF: eth0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-7.3:5 chip-ID: 8087:0029
    class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 3.0 lmp-v: 5.2
    sub-v: 200f hci-v: 5.2 rev: 200f
  Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept
    service-classes: rendering, capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 491.85 GiB used: 28.29 GiB (5.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Netac model: SSD 512GB size: 476.94 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 0326 scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: Ultra size: 14.91 GiB block-size:
    physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.26 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  ID-1: / raw-size: 476.69 GiB size: 468.13 GiB (98.21%) used: 28.29 GiB (6.0%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
    dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 4 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 40.4 C mobo: N/A gpu: amdgpu temp: 55.0 C mem: 56.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Repos:
  Packages: pm: dpkg pkgs: 2379 libs: 1238 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/brave-browser-release.list
    1: deb [arch=amd64 signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg] https://brave-browser-apt-release.s3.brave.com/ stable main
  Active apt repos in: /etc/apt/sources.list.d/chrome-remote-desktop.list
    1: deb [arch=amd64] http://dl.google.com/linux/chrome-remote-desktop/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://mirror.math.princeton.edu/pub/mxlinux/mx/repo/ bookworm main non-free
  Active apt repos in: /etc/apt/sources.list.d/mxpitemp.list
    1: deb [arch=amd64] http://dl.google.com/linux/earth/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/opera-stable.list
    1: deb https://deb.opera.com/opera-stable/ stable non-free
  Active apt repos in: /etc/apt/sources.list.d/spotify.list
    1: deb http://repository.spotify.com stable non-free
  No active apt repos in: /etc/apt/sources.list.d/steam-beta.list
  Active apt repos in: /etc/apt/sources.list.d/steam-stable.list
    1: deb [arch=amd64,i386 signed-by=/usr/share/keyrings/steam.gpg] https://repo.steampowered.com/steam/ stable steam
    2: deb-src [arch=amd64,i386 signed-by=/usr/share/keyrings/steam.gpg] https://repo.steampowered.com/steam/ stable steam
Info:
  Processes: 391 Uptime: 20m wakeups: 2 Memory: 15.54 GiB used: 2.83 GiB (18.2%) Init: systemd
  v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Top
User avatar
davidy
Posts: 818
Joined: Sat Jul 03, 2021 1:59 pm

Re: Fail to Mount

#2 Post by davidy »

Yes. Thank you. What exactly is it that you did? What is on the drive?
Sys76 LemurPro-mx-23.4, EliteMinis HM90-mx-21.3, Deskmini UM350-phoenixLite win10, Qnap 12tb nas, Protectli FW4C-opnsense(=゜ω゜)

zero privacy = zero security . All MX'd Up
UAP = up above people
Top
User avatar
m_pav
Developer
Posts: 1782
Joined: Sun Aug 06, 2006 3:02 pm

Re: Fail to Mount

#3 Post by m_pav »

I take it the USB drive that is not auto-mounting you're referring to is this one?

Code: Select all

  ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: SanDisk model: Ultra size: 14.91 GiB block-size:
    physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 1.26 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Have you tried running a check on it using Gparted ?

:soapbox:
I have made no secret of the fact I have no love of Sandisk Ultra series flash drives. My tests repeated multiple times over many years (in the hope they will get better) of these controller-less drives have shown them to be underwhelming in all aspects of their operations and reliably unreliable.

Every time I get a customer come to me with one of those things, I cringe, knowing what to expect from it. I personally think they make a fantastic cushion between a Hammer in full flight and an Anvil at a metal forge :killcomputer:
Mike P

Regd Linux User #472293
(Daily) Lenovo T560, i7-6600U, 16GB, 2.0TB SSD, MX_ahs
(ManCave) AMD Ryzen 5 5600G, 32G, 8TB mixed, MX_ahs
(Spare)2017 Macbook Air 7,2, 8GB, 256GB SSD, MX_ahs
Top
mattdebauge
Posts: 42
Joined: Wed Jan 04, 2023 8:28 pm

Re: Fail to Mount

#4 Post by mattdebauge »

I decided to reinstall MX Linux and it solved the problem. I think it have lot to do with MX Snapshot that I was using to install new system and noted problems I was having with Thunar. Think problem solved Thanks
Top
Post Reply

Return to “Bugs and Non-Package Requests Forum”