Page 1 of 1
24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 11:30 am
by Squid
QSI:
https://pastebin.com/raw/QUeDtTEN
Im in the 24.4 AHS installer.
I also have 4 displays, where the native res is 2 different.
So far i can manage to set the screens to 1920x1080, but the 2 upper ones are switched left/right, and if i move them in the display application, i can no longer click on the windows because whats draw is not where it is placed, programs are drawn in the same screen, but the mouse cursor seems to be on the other screen.
Any solution for this?
Also, the taskbar-whatevername is some pixels outside the physical monitor borders, and everything has to be clicked some pixels above the actual area on screen
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 2:08 pm
by Eadwine Rose
Please post your QSI in the forum using the Copy for forum button. Saves people from clicking.
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 2:27 pm
by Squid
Code: Select all
System:
Kernel: 6.10.10-1-liquorix-amd64 [6.10-12~mx23ahs] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: audit=0
intel_pstate=disable BOOT_IMAGE=/antiX/vmlinuz quiet splasht nosplash lang=en_GB kbd=se
tz=Europe/Stockholm
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23.4_ahs_x64 Libretto September 15 2024 base: Debian GNU/Linux
12 (bookworm)
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: TUF GAMING B650-PLUS v: Rev 1.xx serial: <superuser required>
UEFI: American Megatrends v: 1616 date: 05/16/2023
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse MX Master 2S serial: <filter>
charge: 100% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 7 7800X3D bits: 64 type: MT MCP arch: Zen 4 gen: 5 level: v4 note: check
built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25) model-id: 0x61 (97) stepping: 2
microcode: 0xA601203
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache: L1: 512 KiB
desc: d-8x32 KiB; i-8x32 KiB L2: 8 MiB desc: 8x1024 KiB L3: 96 MiB desc: 1x96 MiB
Speed (MHz): avg: 949 high: 4850 min/max: 400/5050 scaling: driver: amd-pstate-epp
governor: performance cores: 1: 4850 2: 400 3: 400 4: 400 5: 4735 6: 400 7: 400 8: 400 9: 400
10: 400 11: 400 12: 400 13: 400 14: 400 15: 400 16: 400 bogomips: 134396
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Vulnerable: Safe RET, no microcode
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Enhanced / Automatic IBRS; IBPB: conditional; STIBP: always-on;
RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA AD104 [GeForce RTX 4070] vendor: ASUSTeK driver: nouveau v: kernel non-free: N/A
status: unknown device ID pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1, DP-2, DP-3,
HDMI-A-1 empty: none bus-ID: 01:00.0 chip-ID: 10de:2786 class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: swrast gpu: nouveau display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x572mm (40.00x22.52") s-diag: 1166mm (45.9")
Monitor-1: DP-1 pos: bottom-l model: Dell U2724D serial: <filter> built: 2024 res: 1920x1080
dpi: 82 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9 modes:
max: 2560x1440 min: 720x400
Monitor-2: DP-2 pos: top-right model: AOC 27G2G4 serial: <filter> built: 2020 res: 1920x1080
dpi: 82 gamma: 1.2 size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-3: DP-3 pos: primary,bottom-r model: Dell U2724D serial: <filter> built: 2024
res: 1920x1080 dpi: 82 gamma: 1.2 size: 597x336mm (23.5x13.23") diag: 685mm (27") ratio: 16:9
modes: max: 2560x1440 min: 720x400
Monitor-4: HDMI-A-1 mapped: HDMI-1 pos: top-left model: AOC 27G2G4 serial: <filter> built: 2020
res: 1920x1080 dpi: 82 gamma: 1.2 size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9
modes: max: 1920x1080 min: 720x400
API: OpenGL v: 4.5 Mesa 23.1.2-1~mx23ahs renderer: llvmpipe (LLVM 15.0.6 256 bits)
direct-render: Yes
Audio:
Device-1: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:22bc class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0d:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.10.10-1-liquorix-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 port: e000 bus-ID: 08:00.0 chip-ID: 10ec:8125 class-ID: 0200
IF: eth0 state: up speed: 2500 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: ASUSTek AalteUSB-BT500 type: USB driver: btusb v: 0.8 bus-ID: 3-1:2 chip-ID: 0b05:190e
class-ID: e001 serial: <filter>
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 3.0 lmp-v: 5.1
sub-v: d922 hci-v: 5.1 rev: dfc6
Info: acl-mtu: 1021:6 sco-mtu: 255:12 link-policy: rswitch hold sniff park
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
RAID:
Hardware-1: Advanced Micro Devices [AMD] Device driver: N/A v: N/A port: N/A bus-ID: 0b:00.0
chip-ID: 1022:43bd rev: N/A class-ID: 0104
Drives:
Local Storage: total: 5.55 TiB used: 2.33 GiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SKC3000D2048G size: 1.86 TiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: EIFK31.6 temp: 27.9 C scheme: MBR
ID-2: /dev/nvme1n1 maj-min: 259:2 vendor: Kingston model: SKC3000D2048G size: 1.86 TiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter>
rev: EIFK31.6 temp: 22.9 C scheme: MBR
ID-3: /dev/nvme2n1 maj-min: 259:4 vendor: Western Digital model: WD BLACK SN850X 2000GB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD
serial: <filter> rev: 620361WD temp: 29.9 C scheme: GPT
ID-4: /dev/sda maj-min: 8:0 type: USB vendor: SanDisk model: Cruzer Contour size: 7.51 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> rev: 8.42 scheme: GPT
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 46.6 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2119 libs: 1052 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://mirror.accum.se/mirror/mxlinux.org/packages/mx/repo/ bookworm main non-free
2: deb http://mirror.accum.se/mirror/mxlinux.org/packages/mx/repo/ bookworm ahs
Info:
Processes: 359 Uptime: 7m wakeups: 6 Memory: 62.54 GiB used: 1.86 GiB (3.0%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 2:46 pm
by CharlesV
So, I noticed you are running the nouveau drivers.. I had trouble with them when I had 3 monitors landscape and 1 monitor portrait. Most of the issues were when dragging pdf's over to the Portrait monitor (which was there FOR PDf's ;-/ )
The nvidia driver fixed that.
I run an RTX 2060 and am on nvidia 535 drivers, and have been very happy with them. ( minimal issues.)
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 3:00 pm
by Squid
The live USB runs it..
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 3:41 pm
by CharlesV
Wait, so your running OK on a liveusb ?
perhaps changing the current config. Start with renaming
~/.config/xfce4/xfconf/xfce-perchannel-xml/displays.xml
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 3:46 pm
by Squid
CharlesV wrote: ↑Sun Dec 15, 2024 3:41 pm
Wait, so your running OK on a liveusb ?
perhaps changing the current config. Start with renaming
~/.config/xfce4/xfconf/xfce-perchannel-xml/displays.xml
its not running ok in the live usb, thats why im here asking for advice like if its possible to fix this before i commit installing it?
The usb asks if i want to use some nvidia drivers in console before it loads the desktop in a similar part like this image (but part of boot up checks that it finds nvidia and my now disabled internal amd gpu)
https://cdn.iguru.gr/wp-content/uploads ... nvidia.png
Moderator: image changed to link, please read the forum rules.
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 3:49 pm
by CharlesV
ic, so I would install them. you can back out using that command ( sudo ddm-mx -p nvidia )
The other way would be to install without them, then after your up and running save using timeshift and then install nvidia.
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 3:52 pm
by Stevo
Squid wrote: ↑Sun Dec 15, 2024 3:00 pm
The live USB runs it..
MX doesn't ship with the proprietary Nvidia drivers; you're using nouveau per the QSI. Plus the AHS repos have quite a few updates since your version--notably; we've updated Mesa and the firmware. But your hardware is 2022 vintage, and probably doesn't really require AHS
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 3:57 pm
by Squid
Stevo wrote: ↑Sun Dec 15, 2024 3:52 pm
Squid wrote: ↑Sun Dec 15, 2024 3:00 pm
The live USB runs it..
MX doesn't ship with the proprietary Nvidia drivers; you're using nouveau per the QSI. Plus the AHS repos have quite a few updates since your version--notably; we've updated Mesa and the firmware. But your hardware is 2022 vintage, and probably doesn't really require AHS
I couldn't get the non ahs boot past the grub part, was stuck at a black screen with a blinking "_", thats why i hopped on the ahs.
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 4:00 pm
by Squid
CharlesV wrote: ↑Sun Dec 15, 2024 3:49 pm
ic, so I would install them. you can back out using that command ( sudo ddm-mx -p nvidia )
The other way would be to install without them, then after your up and running save using timeshift and then install nvidia.
Ok, ill have to check that tomorrow, tonight is to late to start with this.
Re: 24.3 AHS - live wierd display problems
Posted: Sun Dec 15, 2024 4:02 pm
by Squid
I think perhaps why the non AHS did not boot, im rather sure i saw this dialog when making my usb stick, and not on the AHS version:
("Revoked UEFI bootloader detected")
https://forum.acronis.com/sites/default ... oked_0.PNG