Page 1 of 1

Aiuto per fstab

Posted: Sun Dec 01, 2024 3:42 am
by corry
Chiedo a qualche anima gentile aiuto per fstab. Ho provato ad aggiungere in fstab il mio SSD esterno
per poterlo fare montare automaticamente senza dover tutte le volte avviarlo da gestione disco ma sicuramente sbaglio ad inserire in fstab lla stringa del mio disco e l'SSD non si monta automaticamente.
Grazie
Se nel forum devo inserire le caratteristiche del mio pc e del mio disco fatemi sapere dove le devo copiare.
Grazie

Code: Select all

System:
  Kernel: 6.1.0-28-amd64 [6.1.119-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-28-amd64 root=UUID=<filter> ro quiet splash
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
    dm: LightDM v: 1.26.0 Distro: MX-23.4_x64 Libretto September 15  2024 base: Debian GNU/Linux 12
    (bookworm)
Machine:
  Type: Desktop Mobo: ASUSTeK model: M4N78 SE v: Rev X.0x serial: <superuser required>
    BIOS: American Megatrends v: 1501 date: 10/09/2012
CPU:
  Info: model: AMD Athlon 64 X2 4800+ bits: 64 type: MCP arch: K8 level: v1 built: 2005-08
    process: AMD 65nm family: 0xF (15) model-id: 0x6B (107) stepping: 2 microcode: 0x83
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 256 KiB desc: d-2x64 KiB; i-2x64 KiB
    L2: 1024 KiB desc: 2x512 KiB
  Speed (MHz): avg: 1000 min/max: 1000/2500 scaling: driver: powernow-k8 governor: ondemand
    cores: 1: 1000 2: 1000 bogomips: 10049
  Flags: ht lm nx pae sse sse2 sse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: reg_file_data_sampling status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Not affected
  Type: spec_store_bypass status: Not affected
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines; STIBP: disabled; RSB filling; PBRSB-eIBRS: Not
    affected; BHI: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA G86 [GeForce 8400 GS] driver: nvidia v: 340.108 non-free: series: 340.xx
    status: legacy (EOL) last: release: 340.108 kernel: 5.4 xorg: 1.20 arch: Tesla process: 40-80nm
    built: 2006-13 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 bus-ID: 02:00.0 chip-ID: 10de:0422
    class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: nvidia
    unloaded: fbdev,modesetting,nouveau,vesa alternate: nv gpu: nvidia display-ID: :0.0 screens: 1
  Screen-1: 0 s-res: 1680x1050 s-dpi: 96 s-size: 445x278mm (17.52x10.94") s-diag: 525mm (20.66")
  Monitor-1: HDMI-0 res: 1680x1050 hz: 60 dpi: 89 size: 480x270mm (18.9x10.63")
    diag: 551mm (21.68") modes: N/A
  API: OpenGL v: 3.3.0 NVIDIA 340.108 renderer: GeForce 8400 GS/PCIe/SSE2 direct-render: Yes
Audio:
  Device-1: C-Media CMI8738/CMI8768 PCI Audio driver: snd_cmipci v: kernel bus-ID: 01:08.0
    chip-ID: 13f6:0111 class-ID: 0401
  API: ALSA v: k6.1.0-28-amd64 status: kernel-api tools: alsamixer,amixer
  Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: NVIDIA MCP77 Ethernet vendor: ASUSTeK driver: forcedeth v: kernel port: b880
    bus-ID: 00:0a.0 chip-ID: 10de:0760 class-ID: 0200
  IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB driver: btusb v: 0.8
    bus-ID: 1-2:2 chip-ID: 0a12:0001 class-ID: fe01
  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 1.1 lmp-v: 1.1
    sub-v: 33c hci-v: 1.1 rev: 33c
  Info: acl-mtu: 192:8 sco-mtu: 64:8 link-mode: peripheral accept service-classes: rendering,
    capturing, object transfer, audio, telephony
Drives:
  Local Storage: total: 700.51 GiB used: 32.55 GiB (4.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37240G size: 223.57 GiB block-size:
    physical: 512 B logical: 512 B speed: 1.5 Gb/s type: SSD serial: <filter> rev: 0103 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 type: USB model: SSD 512GB size: 476.94 GiB block-size:
    physical: 4096 B logical: 512 B type: SSD serial: <filter> rev: 0201 scheme: MBR
Partition:
  ID-1: / raw-size: 223.57 GiB size: 219 GiB (97.96%) used: 32.55 GiB (14.9%) fs: ext4
    dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: file size: 3 GiB used: 0 KiB (0.0%) priority: -2 file: /swap/swap
Sensors:
  System Temperatures: cpu: 38.0 C mobo: 31.0 C gpu: nvidia temp: 48 C
  Fan Speeds (RPM): cpu: 2596 case-1: 0
  Power: 12v: 12.09 5v: N/A 3.3v: 3.17 vbat: N/A
Repos:
  Packages: pm: dpkg pkgs: 2214 libs: 1113 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
    pkgs: 0 pm: flatpak pkgs: 0
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
    1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/debian.list
    1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
    2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
    1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/mx.list
    1: deb http://it.mxrepo.com/mx/repo/ bookworm main non-free
Info:
  Processes: 203 Uptime: 23m wakeups: 1 Memory: 7.75 GiB used: 1.5 GiB (19.4%) Init: SysVinit
  v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
  Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: BIOS (legacy, CSM, MBR)

Re: Ziuto per fstab

Posted: Sun Dec 01, 2024 3:48 am
by Eadwine Rose
Spostato nel sottoforum delle lingue. La lingua del forum è l'inglese, per favore scrivete in inglese, a meno che non siate in questo sottoforum, grazie.

Re: Aiuto per fstab

Posted: Sun Dec 01, 2024 7:23 am
by j2mcgreg
Devi postare l'output dall'utility QSI. L'utility Quick System Info (QSI) si trova in MX Tools e il suo output è formattato automaticamente per l'uso qui nel forum. Esegui l'utility QSI, clicca su "Copia per forum" in basso e poi incollalo qui nel tuo thread. Regole del forum

Re: Aiuto per fstab

Posted: Sun Dec 01, 2024 9:19 am
by Eadwine Rose
@j2mcgreg Italiano ;)

Re: Aiuto per fstab

Posted: Sun Dec 01, 2024 9:27 am
by Gabriel_M
Devi postare l'output dall'utilità QSI. L'utilità Quick System Info (QSI) si trova in MX Tools e il suo output è formattato automaticamente per l'uso qui nel forum. Esegui l'utilità QSI, clicca su "Copia per forum" in basso e poi incollalo qui nel tuo thread.

Regole del forum

Che file system hanno le partizioni del disco?

Qual è l'UUID di quelle partizioni

In quale directory sono montati?

Re: Aiuto per fstab

Posted: Sun Dec 01, 2024 11:28 am
by Kermit the Frog
Il “Gestore Dischi” (dal menu) lo farà in modo semplice.